LittleMachineShop.com has cutting tools for your mini lathe and mini mill. For your lathe, we have presharpened and unsharpened high speed steel tool bits, cut-off blades, center drills, and indexable tool bits. For your mini mill we carry several sets of high speed steel end mills and indexable end mills.
|
1247 Boring Bar Set, Carbide 1/2" Shank
This carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 7/16", and 9/16". The bore depth ranges from 3/4" to 3".
The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter. |
|
3768 Boring Bar Set, Carbide 1/2" Shank with Holder for Mini Lathe
- 9 piece carbide-tilled boring bar set
- Boring bar holder for standard mini lathe tool post
This carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 7/16", and 9/16". The bore depth ranges from 3/4" to 3".
The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter.
The boring bar holder fits in the standard 4-way tool post on 7x10, 7x12, and 7x14 mini lathes.. It holds boring bars with 1/2" shanks. |
|
1246 Boring Bar Set, Carbide 3/8" Shank
This carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4".
The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter. |
|
2682 Boring Bar Set, HSS 1/2" Shank
This high speed steel 10-piece boring bar set includes boring bars for minimum bores of 5/16", 7/16", and 9/16". The bore depth ranges from 3/4" to 2 1/4".
The boring bars are made from M42 8% cobalt high speed steel.
The shanks are held to 0.000 to -0.0005" from the nominal diameter. |
|
2683 Boring Bar Set, HSS 3/8" Shank
This high speed steel 8-piece boring bar set includes three different length boring bars each for minimum bores of 5/16" and 3/8", and two boring bars for minimum bores of 7/16". The bore depth ranges from 3/4" to 1-11/16".
The boring bars are made from M42 8% cobalt high speed steel.
The shanks are held to 0.000 to -0.0005" from the nominal diameter. |
|
1780 Boring Bar, 1/2" Indexable CCMT Inserts
This 1/2" diameter indexable boring bar uses CCMT inserts.
The boring bar is 7" long.
Use CCMT 32.51 or CCMT 32.52 inserts with this boring bar.
This boring bar does not come with an insert. You must purchase inserts separately. |
|
1721 Boring Bar, 1/2" Indexable HSS Inserts
- 1/2" diameter, 5" long boring bar with TPMW-221 insert
- 2 extra TPMW-221 high speed steel inserts
- 1 extra Torx screw
- 1 wrench
This Warner precision boring bar uses high speed steel inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling. |
|
1779 Boring Bar, 3/8" Indexable CCMT Inserts
This 3/8" diameter indexable boring bar uses CCMT inserts.
The boring bar is 6" long.
Use CCMT 21.51 or CCMT 21.52 inserts with this boring bar.
This boring bar does not come with an insert. You must purchase inserts separately. |
|
1720 Boring Bar, 3/8" Indexable HSS Inserts
- 3/8" diameter, 5" long boring bar with TPMW-1.81.5.5 insert
- 2 extra TPMW-1.81.5.5 high speed steel inserts
- 1 extra Torx screw
- 1 wrench
This Warner precision boring bar uses high speed steel inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling. |
|
3719 Boring Bar, 5/16" Indexable CCMT Inserts
This 5/16" diameter indexable boring bar uses CCMT inserts.
The boring bar is 4" long.
Use CCMT 21.51 or CCMT 21.52 inserts with this boring bar.
This boring bar does not come with an insert. You must purchase inserts separately. |
|
3662 Boring Head Set, R8 Shank
- Includes boring head, R8 shank, and 9-piece boring bar set
- 2" diameter boring head holds 1/2" shank boring bars
- The boring head offsets up to 5/8", dial is graduated in 0.001"
- Minimum bore diameter is 5/16"
- Maximum bore depth is 3"
The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 7/16", and 9/16". The bore depth ranges from 3/4" to 3". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter. |
|
2905 Dovetail Cutter, 60° 1/2" Diameter
- High speed steel cutter
- 60° dovetail angle
- 1/2"cutting diameter
- 3/8" shank diameter
|
|
2906 Dovetail Cutter, 60° 3/4" Diameter
- High speed steel cutter
- 60° dovetail angle
- 3/4"cutting diameter
- 3/8" shank diameter
|
|
2904 Dovetail Cutter, 60° 3/8" Diameter
- High speed steel cutter
- 60° dovetail angle
- 3/8"cutting diameter
- 3/8" shank diameter
|
|
3043 Drill Set, #1-60 Jobber Length HSS
- Imported
- Surface treated black finish
- 118º point
#1 to 60 high speed steel drill set.
Set includes number drills from 1 to 60.
These are jobbers length drills with straight shanks. Jobbers length drills are normal length drills.
Includes a metal index for storing the drills. |
|
2826 Drill Set, 115 Piece Jobber Length HSS
- Imported
- Surface treated black finish
- 118º point
115 Piece high speed steel drill set.
Set includes 1/16" - 1/2" by 64ths, A - Z, and No. 1 - 60.
These are jobbers length drills with straight shanks. Jobbers length drills are normal length drills.
Includes a metal index for storing the drills. |
|
1245 End Mill Set, 10 pieces 2 & 4 Flute
- 10 piece TiN coated HSS end mill set
- Includes both 2 flute and 4 flute end mills
- Center cutting end mills
- Includes 1/4", 3/8", 1/2" , 5/8", and 3/4" end mills
This 10 piece TiN coated HSS end mill set includes both 2 flute and 4 flute end mills.
The set comes in a fitted case. |
|
1244 End Mill Set, 20 pieces 2 & 4 Flute
- 20 piece TiN coated HSS end mill set
- Includes both 2 flute and 4 flute end mills
- Center cutting end mills
- 3/16" to 3/4" by 16ths
The 3/16" through 7/16" end mills have a 3/8" shank.
The 1/2" and 9/16" end mills have a 1/2" shank.
The 5/8" and 11/16" end mills have a 5/8" shank.
The 3/4" end mill has a 3/4" shank.
The set comes in a fitted case. |
|
1242 End Mill Set, 6 Piece 2 Flute
- 6 piece HSS end mill set
- 2 flute end mills
- Center cutting end mills
- Includes 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" end mills
- All end mills have 3/8" shank.
The set comes in a wood stand. |
|
2902 End Mill Set, 6 Piece 2 Flute Ball
- 6 piece HSS end mill set
- 2 flute ball (round end) end mills
- Center cutting end mills
- Includes 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" end mills
- 1/8" through 3/8" end mills have 3/8" shank, 1/2" end mills have 1/2" shank
The set comes in a wood stand. |
|
1243 End Mill Set, 6 Piece 4 Flute
- 6 piece HSS end mill set
- 4 flute end mills
- Center cutting end mills
- Includes 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" end mills
- All end mills have 3/8" shank.
The set comes in a wood stand. |
|
2903 End Mill Set, 6 Piece 4 Flute Ball
- 6 piece HSS end mill set
- 4 flute ball (round end) end mills
- Center cutting end mills
- Includes 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" end mills
- 1/8" through 3/8" end mills have 3/8" shank, 1/2" end mills have 1/2" shank
The set comes in a wood stand. |
|
2548 End Mill Set, Miniature, 10 pieces 2 & 4 Flute
- 10 piece miniature HSS end mill set
- Includes both 2 flute and 4 flute end mills
- Double ended, center cutting end mills
- Includes 1/16", 3/32", 1/8", 5/32" & 3/16” end mills
- All end mills have 3/16" shank
The set comes in a wood stand. |
|
3572 Grooving & Cutoff Tool, Indexable HSS Inserts
- For external grooving and cutoff operations
- Includes three 1/16 (.062”) groover T-15 high speed steel inserts
- Includes two 1/32 (.031”) groover T-15 high speed steel inserts
- Includes two IS 3007 screws and one T-9 wrench
This A R Warner grooving and cut-off tool has a 0.375" shank and is 4.5" long.
The maximum cutting depth of the groover inserts is approximately 0.25". |
|
1889 Indexable End Mill, 2MT
This indexable end mill has a 16 mm (0.63") cutting diameter.
It has a 2 Morse taper drawbar shank and a 3/8-16 thread for the drawbar. It comes with one insert. |
|
1146 Indexable End Mill, 3MT
This indexable end mill has a 30 mm (1.18") cutting diameter.
It has a 3 Morse taper shank and 3/8"-16 thread for the drawbar. It comes with one set of inserts.
The indexable end mill uses TPCN1603PDR inserts. |
|
1952 Indexable End Mill, R8
This indexable end mill has a 1.25" cutting diameter.
It has an R8 shank and comes with one set of inserts. |
|
2211 Model Naval Cannon Fully Assembled
- Decorative model of a naval cannon
- Fully assembled on a wooden base
The completed model cannon is 7 1/2" long, 2 3/8" wide, and 3 5/8" tall. The base is 7 7/8" long 5 3/8" wide.
This is a decorative cannon. It cannot be fired. |
|
2431 Profiling Tool, 3/8" HSS & Carbide Inserts
- 3/8" square, 6" long profiling tool
- Uses HSS and carbide inserts
- Includes 2 HSS inserts and one carbide insert
- 1 extra Torx screw
- 1 wrench
This Warner precision profiling tool uses high speed steel or carbide inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling.
This profiling tool is great for CNC applications, and can be used for most of your turning needs. |
|
3601 Tap & Die Set, 39-Piece Solid Round Dies
- 39-piece machine screw & fractional tap and solid round die set
- Machine screw and fractional sizes of plug style taps plus 1" solid round dies
- Includes three tap handles and two die stocks
- 18-leaf standard thread pitch gauge and screwdriver
- Plastic case with lift-out tray
This USA-made Hansen brand 39 PC set can be used to create new threads.
The Hanson 39-Piece Machine Screw / Fractional Tap and Solid Round Die Set includes machine screw taps, fractional plug style taps, plus 1-inch solid round dies. A adjustable guide diestock for cutting external threads on metal cylinders is included, as well as a adjustable handle tap wrench to create internal screw threads, and a T-handle tap wrench. There's also an 18-leaf standard thread pitch gauge, a screwdriver, and a handy plastic case to keep everything organized.
39-pc set in plastic case includes the following items:
Machine Screw Plug Tap and 1" Solid Round Dies in sizes: 4 - 40 NC, 6 - 32 NC, 8 - 32 NC, 10 - 24 NC, 10 - 32 NF, 12 - 24 NC
Fractional Plug Tap and 1" Solid Round Dies in sizes: 1/4" - 20 NC, 1/4" - 28 NF, 5/16" - 18 NC, 5/16" - 24 NF, 3/8" - 16 NC, 3/8" - 24 NF, 7/16" - 14 NC, 7/16" - 20 NF, 1/2" - 13 NC, 1/2" - 20 NF
Pipe Thread Plug Tap and 1" Solid Round Dies in sizes: 1/8" - 27 NPT
Threading Tools: Adjustable Die Stock - 1" Dies, T-Handle Wrench - Taps No. 0 to 1/4", Adj. Handle Tap Wrench - Taps No. 0 to 1/2", 18 Leaf Standard Thread Pitch Gauge, Empty Plastic Case |
|
3695 Threading Tool, 3/8" Indexable HSS Inserts
- For internal and external threading
- 3/8" shank, 3/8" IC Inserts, 5" long
- 2 inserts included: TNMC-32-NV and TPMC-32-NV
- 1 extra 6-32 flat head cap screw
- 1 wrench
This A R Warner precision threading tool will turn both internal and external threads. You can mount inserts on both ends. One end mounts the insert at the end of the tool for external threading. The mount on the other end is offset. Mount the insert one way for internal threading. Turn the insert around and you can use the tool for external threading too.
The minimum bore diameter for internal threading is 1.375". |
|
1966 Tool Bit, 1/4" 45 Degree Chamfer Presharpened
45 Degree chamfer presharpened 1/4" tool bit.
Made from high speed steel. |
|
1968 Tool Bit, 1/4" Boring Bar Presharpened
Presharpened 1/4" boring bar.
Made from high speed steel. |
|
1895 Tool bit, 1/4" HSS Internal Threading
This 1/4" square high speed steel tool bit is pre-sharpened for internal threading.
The internal threading tool bit has a threading point ground on the side of the tool. It will comfortably reach 3/4" into a hole. |
|
1964 Tool Bit, 1/4" Left Hand Presharpened
Left hand presharpened 1/4" tool bit.
Made from high speed steel.
A left hand tool cuts on the right side of the tool. |
|
1155 Tool Bit, 1/4" M2
1/4 Square 2-1/2 Long HSS Tool Bit.
These are imported tool bits made of M2 high speed steel. |
|
1965 Tool Bit, 1/4" Right Hand Presharpened
Right hand presharpened 1/4" tool bit.
Made from high speed steel.
A right hand tool cuts on the left side of the tool. |
|
1967 Tool Bit, 1/4" Round Nose Presharpened
Round nose presharpened 1/4" tool bit.
Made from high speed steel. |
|
1717 Tool Bit, 1/4" T-15
1/4 Square 2-1/2 Long HSS Tool Bit.
These are American-made tool bits made of T-15 high speed steel. |
|
1154 Tool Bit, 1/8" M2
1/8 Square 2-1/2 Long HSS Tool Bit.
These are imported tool bits made of M2 high speed steel. |
|
1726 Tool Bit, 1/8" T-15
1/8 Square 2-1/2 Long HSS Tool Bit.
These are American-made tool bits made of T-15 high speed steel. |
|
1153 Tool Bit, 3/16" M2
3/16 Square 2-1/2 Long HSS Tool Bit.
These are imported tool bits made of M2 high speed steel. |
|
1716 Tool Bit, 3/16" T-15
3/16 Square 2-1/2 Long HSS Tool Bit.
These are American-made tool bits made of T-15 high speed steel. |
|
1156 Tool Bit, 3/8" M2
3/8 Square 2-1/2 Long HSS Tool Bit.
These are imported tool bits made of M2 high speed steel. |
|
1718 Tool Bit, 3/8" T-15
3/8 Square 3 Long HSS Tool Bit.
These are American-made tool bits made of T-15 high speed steel. |
|
1658 Tool Bit, 5 mm x 8 mm Presharpened
This 5 mm x 8 mm presharpened tool bit fits one of the tool holders in our 1214 Tool holders and Tools Bits set. |
|
3193 Tool Bit, 5/16" Left Hand Brazed Carbide
- AL-5 brased carbide turning tool
- Left hand tool; cuts from left to right
- C6 grade carbide
These tool bit are C6 grade carbide. C6 carbide is designed for steel and steel alloys, but in hobby use works fine on aluminum and non-ferrous metals too. |
|
1152 Tool Bit, 5/16" M2
5/16 Square 2-1/2 Long HSS Tool Bit.
These are imported tool bits made of M2 high speed steel.
The tool post on most mini lathes are sized to use 5/16" tool bits. |
|
3192 Tool Bit, 5/16" Right Hand Brazed Carbide
- AR-5 brased carbide turning tool
- Right hand tool; cuts from right to left
These tool bit are C6 grade carbide. C6 carbide is designed for steel and steel alloys, but in hobby use works fine on aluminum and non-ferrous metals too. |
|
1715 Tool Bit, 5/16" T-15
5/16 Square 2-1/2 Long HSS Tool Bit.
These are American-made tool bits made of T-15 high speed steel.
The tool post on most mini lathes are sized to use 5/16" tool bits. |
|
2963 Tool Bit, Large Ball and Radius Turning Tool
This is a replacement tool bit for the large OMW ball and radius turning too.
The tool bit is 1/4" diameter and 1 1/2" long. |
|
2964 Tool Bit, Small Ball and Radius Turning Tool
This is a replacement tool bit for the small OMW ball and radius turning too.
The tool bit is 3/16" diameter and 3/4" long. |
|
2250 Tool Bits, 1/4" Presharpened Set of 6
- Six presharpened 1/4" high speed steel tool bits
- Includes Right hand, Left hand, 45 degree chamfer, Round nose, Boring bar, Cut off
|
|
2412 Tool Bits, 5/16" Brazed Carbide Set of 5
This set includes five different brazed carbide turning tools. The shanks are 5/16" which is the right size for the mini lathe.
This set includes one each of the following tool bits: DIN 4971R, DIN 4975, DIN 4980R, DIN 4980L, DIN 4981R. |
|
1657 Tool Bits, 6 mm Presharpened Set of 2
Two presharpened 6 mm tool bits.
One bit is ground for threading on one end and turning on the other end. The other bit is ground for cut-off on one end and turning on the other end.
The tool bits fit our 1214 Tool holders and Tools Bits set, and can be used in other tool posts as well. |
|
1214 Tool holders and Tool Bits
These tool holders hold the included tool bits at the proper cutting height in the mini lathe tool post.
One holds a cutting tool straight, and the other holds one at a 45º angle.
The set includes the two tool holders, three tool bits, and an Allen wrench. Two of the tool bits are 6 mm square. The other is 5 mm x 8 mm. |
|
3693 Turning (1/4") and Boring (3/8") Tools, Indexable HSS Inserts
- Right and left hand turning tools with 0.250" shank 3.5" long
- Boring bar with 0.375" shank 5.0" overall length
- Includes three T-15 High Speed Steel CCMW-2-1.5-1 inserts for turning
- Includes two T-15 High Speed Steel CEMW-2-1.5-1 inserts for boring
- Includes two MS-1152S screws, four MS-1153 screws and one T-7 wrench
This A R Warner kit includes a 1/4" right-hand turning tool, a 1/4" left-hand turning tool, and a 3/8" boring bar.
The r ight hand turning bar has a 0.250” shank, and is 3.50” in overall length.
The left hand turning bar has a 0.250” shank, and is 3.50” in overall length. The left hand turning bar has a second insert pocket in opposite end that provides a 50° side cutting edge angle. This provides a way to use the two insert points that are not used in the other tool holders.
The boring bar has a 0.375” shank, and is 5.0” in overall length. It has 0.188" flat along length for location, and requires a 0.365" minimum bore. |
|
3694 Turning and Boring Tools, 3/8" Indexable HSS Inserts
- Right and left hand turning tools with 0.375" shank 3.5" long
- Boring bar with 0.375" shank 5.0" overall length
- Includes three T-15 High Speed Steel CCMW-2-1.5-1 inserts for turning
- Includes two T-15 High Speed Steel CEMW-2-1.5-1 inserts for boring
- Includes two MS-1152S screws, four MS-1153 screws and one T-7 wrench
This A R Warner kit includes a 3/8" right-hand turning tool, a 3/8" left-hand turning tool, and a 3/8" boring bar.
The r ight hand turning bar has a 0.375” shank, and is 3.50” in overall length.
The left hand turning bar has a 0.375” shank, and is 3.50” in overall length. The left hand turning bar has a second insert pocket in opposite end that provides a 50° side cutting edge angle. This provides a way to use the two insert points that are not used in the other tool holders.
The boring bar has a 0.375” shank, and is 5.0” in overall length. It has 0.188" flat along length for location, and requires a 0.365" minimum bore. |
|
3569 Turning Tools, 1/2" Indexable CCMW HSS Inserts
- Right hand tool holder
- Left hand tool holder, double ended
- Includes five T-15 high speed steel CCMW-3-2.5-2 inserts
- Includes four MS-1155 screws and one T-15 wrench
Right hand bar has 0.5" shank and is 4" long.
Left hand bar has 0.5" shank and is 4" long. It includes a second insert pocket that provides a 50° side cutting edge.
Uses CCMW-3-2.5-.5, CCMW-3-2.5-1, and CCMW-3-2.5-2 inserts.
The second insert pocket on the left hand tool provides a way to use the second and fourth corners on the diamond insert.
Made by A R Warner. |
|
2286 Turning Tools, 1/2" Indexable TCMM inserts
This set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), carbide inserts, wrenches, and extra screws. It comes in a plastic case.
Carbide inserts are TCMM-321 (or TT-321). |
|
1620 Turning Tools, 1/2" Indexable TPMB HSS Inserts
- Style AR right hand tool
- Style BR right hand tool with a 15° lead angle
- Style E Neutral threading tool with 60° included angle
- Style BL left hand tool with a 15° lead angle
- Style AL left hand tool
These Warner precision tool holder kits use high speed steel inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling.
The kit contains the following:
5 tool holder styles with TPMB-322 inserts
1 extra TPMB-322 insert
1 extra Torx screw
1 wrench
Each tool holder is a different style. There is one each of the following:
Style AR right hand tool
Style BR right hand tool with a 15° lead angle
Style E Neutral threading tool with 60° included angle
Style BL left hand tool with a 15° lead angle
Style AL left hand tool |
|
1913 Turning Tools, 1/4" Indexable TCMM inserts
This set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, wrenches, and extra screws. It comes in a plastic case. |
|
1719 Turning Tools, 1/4" Indexable TPMW HSS Inserts
- Style AR right hand tool
- Style BR right hand tool with a 15° lead angle
- Style E Neutral threading tool with 60° included angle
- Style BL left hand tool with a 15° lead angle
- Style AL left hand tool
These Warner precision tool holder kits use high speed steel inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling.
The kit contains the following:
5 tool holder styles with TPMW-1.81.51 inserts
1 extra TPMW-1.81.51 high speed steel insert
1 extra Torx screw
1 wrench |
|
1679 Turning Tools, 3/8" Indexable TCMM inserts
This set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), carbide inserts, wrenches, and extra screws. It comes in a plastic case.
The carbide inserts are TCMM-221 (or TT-221).
|
|
1669 Turning Tools, 3/8" Indexable TCMT Inserts
This set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a wooden case.
The carbide inserts are TCMT21.51.
You can also use high speed steel TCMW-21.51 or TCMW-21.52 inserts. |
|
1619 Turning Tools, 3/8" Indexable TPMW HSS Inserts
- Style AR right hand tool
- Style BR right hand tool with a 15° lead angle
- Style E Neutral threading tool with 60° included angle
- Style BL left hand tool with a 15° lead angle
- Style AL left hand tool
These Warner precision tool holder kits use high speed steel inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling.
The kit contains the following:
5 tool holder styles with TPMW-222 inserts
1 extra TPMW-222 high speed steel insert
1 extra Torx screw
1 wrench |
