Tooling Packages and Starter Kits

Tooling packages and Starter Kits - LittleMachineShop.com

LittleMachineShop.com has many tooling packages that will save you money when you are setting up a new machine.

0-1/2" drill chuck & Standard 2MT to 33JT arbor
Fits lathes with standard 2MT tailstock taper
Four center drills, sizes 1, 2, 3, and 4
Five 3/8" M2 HSS tool bit blanks

Lathe starter kit with 3/8" tool bits provides the basics to get started with a small lathe. The kit contains: 0-1/2" drill chuck and key Standard 2MT to 33JT arbor Four center drills, sizes 1,2,3,and 4 Five 3/8" M2 high speed steel tool bit blanks This starter kit is appropriate for lathes with a standard 2MT tailstock taper.

2653 Starter Kit, Micro Mill

This kit contains the basics you need to start using your new micro mill
44-piece clamping kit for 5/16" (8 mm) T-slots
Thin parallels (3" long)
1-2-3 blocks
Edge and center finder

This kit contains the basics you need to start using your new micro mill. The clamping kit fits the 8 mm T-slots on the micro mill. The clamping kit includes10 M6 studs, 8 step block pairs, 6 T-slot nuts, 6 flange nuts, and 6 step clamps. The thin parallels are a set of 10 matched pairs of high grade steel parallels, precision ground and hardened. The parallels are 1/8" thick and 3" long. The heights are 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8". They are made of high grade alloy steel hardened to 52 to 58 Rc and are parallel within 0.0002" on the top and bottom. The pairs are matched in height within 0.0004". The precision 1-2-3 blocks are ground and case hardened on all sides to 50-60 Rc. The blocks are 1" by 2" by 3". They are parallel within 0.0002", flat within 0.0002" and square within 0.0002". Each set includes two matched blocks. The blocks have 23 holes through them, 5 are threaded 3/8"-16 NC. The 3/8" diameter combination edge and center finder helps you locate work on your mill. The edge finder end has a 0.200" diameter cylinder to quickly find the edge of a work piece. The center finder end tapers to a point to locate holes. The edge and center finder is hardened and ground all over.

1262 Starter Kit, Mill

Clamping kit for 7/16" (12 mm) T-slots
Thin parallels (6" long)
1-2-3 blocks
Edge and center finder
T-slot cleaner

This milling machine kit contains the basics you need to start using your new mini mill. This Mini Mill Starter Kit includes: T-Slot Clamping Kit 7/16" - 58-piece clamping kit 3/8"-16, 7/16 T-Slot. This clamping kit fits the 12 mm T-slots on the mini mill. The clamping kit includes 24 3/8-16 studs, 12 step blocks in pairs, 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, and 6 end hold downs. Clamping kit comes in a wall mount rack. Thin parallels combo set - 10 matched pairs of high grade steel parallels, precision ground and hardened. Parallels are 1/8" thick and 6" long. Heights are 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8". Made of high grade alloy steel hardened to 52 to 58 Rc. Parallel within 0.0002" on the top and bottom. The pairs are matched in height within 0.0004". Set comes in a durable plastic fitted case. 1-2-3 Blocks - These precision 1-2-3 blocks are ground and case hardened on all sides to 50-60 Rc. The blocks are 1" by 2" by 3". They are parallel within 0.0002", flat within 0.0002" and square within 0.0002". Each set includes two matched blocks. The blocks have 23 holes through them, 5 are threaded 3/8"-16 NC. Edge and Center Finder - This 3/8" diameter combination edge and center finder helps you locate work on your mill. The edge finder end has a 0.200" diameter cylinder to quickly find the edge of a work piece. The center finder end tapers to a point to locate holes. The edge and center finder is hardened and ground all over. T-Slot Cleaner - Use this T-slot cleaner to clear the debris from the T-slots on your mini mill and bench mill. Made for LittleMachineShop.com specifically to fit the Mini Mill and Bench Mill.

1261 Starter Kit, Mini Lathe, 5/16" Tool Bits

0-1/2" Capacity Drill Chuck and key
Drill chuck arbor 2MT short to 33JT
Five 5/16" M2 high speed steel tool bit blanks
Four center drills, sizes 1, 2, 3, and 4

Mini Lathe starter kit designed for 7x10, 7x12 and 7x14 mini lathes and includes all the basics you need to get started with a new mini lathe. Drill Chuck: 0-1/2" Capacity drill chuck. All working parts are hardened. Chuck key is included. Number 33 Jacobs taper mount. Runout of this chuck is 0.008" (0.20 mm) or less. This mini lathe starter kit is specifically designed for use on the mini lathe tailstock. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). Tool Bits: 5/16" square by 2-1/2" long HSS mini lathe tool bits made of M2 high speed steel. The tool post on most mini lathes are sized to use 5/16" tool bits. Center Drills: Four sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, and 4 with 60 degree countersinks.

2440 Starter Set, CNC, Tormach TTS

Complete set for CNC operations includes 13 tool holders
Minimal clearance height for tool change
Repeatable tool positioning
All tool holders are hardened and precision ground
Tool height presetting set included

CNC operations work best with one holder for each tool in order to make use of the tool length compensation table in the CNC controller. This function also requires a system for measuring the mounted tools. The CNC set includes a total of 13 tool holders plus a tool measuring set. The Tormach Tool Assistant Set includes 8" digital height gauge (measurement accuracy +/-0.0005"), USB interface cable with touch trigger, manual, and Tool Assistant software. This is an outstanding value and a great way to get started with a CNC that has been retrofitted from a manual machine. If your CNC machine supports a tool offset table but you’re not using it, then you’re not realizing the full benefit of CNC machining.

2441 Starter Set, Manual, Tormach TTS (Inch)

Complete set for manual operations includes 4 tool holders
Minimal clearance height for tool change
Repeatable tool positioning
All tool holders are hardened and precision ground

You don’t need a CNC to take advantage of the Tormach Tooling System. Manual operations benefit from quick change, reduced clearance, and increased rigidity. This is a basic set that will introduce users to all of those features. The manual mill operators set will improve productivity in manual milling.

3491 Tooling Package, 2MT Micro Mill

3" toolmakers screwless vise and 11 pairs of 3" long thin parallels
Precision 1-2-3 Blocks and 36-piece Clamping Kit - 8 mm T-slot
Two 6-piece end mill sets, 2 and 4 flute and 5 center drills
Seven piece 2MT collet set
Combination edge and center finder

Tooling package with all the essentials for a 2MT micro mill. Toolmakers Vise: 3" toolmakers screwless vice has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002". There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects. The vise jaws are 1.38" deep and open to 3.78" capacity. The vise is 7.28" long, 2.76" tall and 2.785" wide. Thin Parallels: Set of 11 pairs, 1/8" thick x 3" long. Made of high-grade alloy steel hardened to 52-58 Rc, parallel within 0.0002" on top and bottom. Parallel heights: 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" with two pairs of shims are 9/64" and 5/32" (pairs matched within 0.0004"). Clamping Kit: 36-piece kit fits 8 mm T-slots on a micro mill. Includes 10 M6 studs, 4 step block pairs, 6 T-slot nuts, 6 flange nuts, and 6 step clamps. End Mills: 6-piece 4 flute and 6-piece 2 flute, HSS, center cutting end mill sets. Sizes 1/8", 3/16", 1/4", 5/16", 3/8", and 1/2". All with 3/8" shanks 2MT Collets: Set of seven high-grade tool hardened steel round collets, sizes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2". The drawbar thread is 3/8"-16. This set includes all the sizes required for common end mills. 1-2-3 Blocks: Ground and hardened on all sides to 50-60 Rc, sizes 1" x 2" x 3". Parallel within 0.0002", flat within 0.0002", and square within 0.00021". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC. Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks.

3490 Tooling Package, 3MT Mini Mill

3" Precision Milling Vise (Heavy) and 10 Pairs of 3" long thin parallels
Precision 1-2-3 Blocks and 20 piece End Mill Set - 2 and 4 Flute (10 each)
58- piece Clamping Kit - 3/8"-16, 7/16" T-Slots, Five Center Drills
Seven piece 3MT Collet Set, 3MT x 3/8"-16 Drawbar
Combination Edge and Center Finder and a T-Slot Cleaner

Tooling package with all the essentials for a 3MT Mini Mill. Milling Vise: 3" Kurt-style milling vice. Top, gib, jaws, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances. Overall length is 10.85" and the height is 3.05". Jaws are 3.15" wide, 1.04" deep, open 3", and are perpendicular to the ways within 0.002" in 4". The ways are parallel to the base within 0.0006" in 4" without the swivel. Thin Parallels: Set of ten pairs, 1/8" thick x 3" long, in fitted case. Made of high-grade alloy steel hardened to 52-58 RC, parallel within 0.0002" on top and bottom. Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" (pairs matched within 0.0004"). End Mills: 20-piece set included 2 flute and 4 flute center cutting TiN coated HSS end mills sizes 3/16"-3/4" by 16ths. 3MT Collets: Set of seven high-grade tool hardened steel round collets, sizes 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", and 3/4". Drawbar: 3MT x 3/8"-16 Mini Mill Drawbar, custom made for LittleMachineShop.com 1-2-3 Blocks: Ground and hardened on all sides to 50-60 RC, sizes 1" x 2" x 3". Parallel within 0.0002", flat within 0.0002", and square within 0.00021". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC. Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks.

3786 Tooling Package, 9x20 Lathe

AXA (Series 100) QCTP Set with post mount for 9x20 Lathes
3/8" Indexable TCMT Inserts, P1X Cut-Off Blade
1/2" Drill Chuck, 2MT Standard to 33JT Drill Chuck Arbor
9-piece carbide Boring Bar Set - 1/2" shank
5 Center Drills (sizes 1-5)

This package contains all the tooling you need to be productive with your 9x20 lathe on the first day you own it. The AXA (Series 100) quick change tool post set (QCTP) includes the tool post, a turning and facing tool holder, a boring, turning and facing tool holder, a heavy duty boring bar holder, a universal parting blade holder, a knurling, facing and turning tool holder. The quick change tool post is made from hardened steel. No tools are required to change tools. Additional tool holders are available. It may require some work in order to make a T-slot nut, to mount this QCTP on your lathe. The turning tool holders accept tools with 3/8" to 1/2" shank. The turning and boring tool holder accepts boring bars with up to 1/2" round shanks. The cut-off tool holder holds 1/2" tall parting blades. The 1/2" capacity drill chuck is mounted on a standard 2 Morse taper shank. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). The set of 3/8" shank indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a fitted case. The carbide inserts are TCMT21.51. The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter. This kit comes with 1/2" boring bars which can be held in the #2 tool holder from the AXA set - Turning & Boring Tool Holder. The dedicated boring bar holder that comes in the AXA set holds 5/8" and 3/4" which we feel are too large for a lathe of this size. The P1X parting blade is 5/64" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This package includes 5 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, 4, and 5. These are 60 degree center drills. These are the sizes that are most used by bench top machinists.

6364 Tooling Package, Atlas/Craftsman 6" Lathe, 0MT

0XA QCTP Set
3/8" Indexable TCMT Inserts, P1N Cut-Off Blade
1/2" Drill Chuck, 0MT Tang to 33JT Drill Chuck Arbor
9-piece carbide Boring Bar Set - 3/8" shank
4 Center Drills (sizes 1-4)

This lathe tooling package contains all the tooling you need to be productive with your Atlas/Craftsman 6" lathe on the first day you own it. The quick change tool post set (QCTP) includes the tool post, mounting hardware, and five tool holders. The tool post is a wedge-type made of all steel. No tools are required to change tools. Additional tool holders are available. This set includes the following tool holders: 2 - #1 Turning and Facing 1 - #2 Boring, Turning and Facing 1 - #4 Heavy Duty Boring will hold both 3/8" and 1/2" boring bars 1 - #7 Universal Parting Blade for 1/2" cut-off blade - 4 degree Turning tool holders accept tools with 1/4" to 1/2" shank. The boring tool holder accepts boring bars with up to 3/8" round shanks. The cut-off tool holder holds 1/2" tall parting blades. The 1/2" capacity drill chuck is mounted on a 0 Morse taper shank part for the Atlas/Craftsman 6" lathe. The rated capacity of the drill chuck is 1mm to 13mm. You will have to cut the tang off the drill chuck arbor to suit your tailstock. A Dremel with a cut-off wheel works well to do this. The set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a wooden case. The carbide inserts are TCMT21.51. The carbide tipped 9-piece boring bar set includes 3 different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter. The P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This lathe tooling package includes 4 different sizes of combined drills and countersinks, commonly called center drills, and other Atlas Craftsman Lathe parts. The HSS center drill set includes sizes 1, 2, 3, and 4. These are 60° center drills; the sizes that are most used by bench top machinists.

3593 Tooling Package, Atlas/Craftsman 6" Lathe, 1MT

0XA QCTP Set
3/8" Indexable TCMT Inserts, P1N Cut-Off Blade
1/2" Drill Chuck, 1MT Tang to 33JT Drill Chuck Arbor
9-piece carbide Boring Bar Set - 3/8" shank
4 Center Drills (sizes 1-4)

This lathe tooling package contains all the tooling you need to be productive with your Atlas/Craftsman 6" lathe on the first day you own it. The quick change tool post set (QCTP) includes the tool post, mounting hardware, and five tool holders. The tool post is a wedge-type made of all steel. No tools are required to change tools. Additional tool holders are available. This set includes the following tool holders: 2 - #1 Turning and Facing 1 - #2 Boring, Turning and Facing 1 - #4 Heavy Duty Boring will hold both 3/8" and 1/2" boring bars 1 - #7 Universal Parting Blade for 1/2" cut-off blade - 4° Turning tool holders accept tools with 1/4" to 1/2" shank. The boring tool holder accepts boring bars with up to 3/8" round shanks. The cut-off tool holder holds 1/2" tall parting blades. The 1/2" capacity drill chuck is mounted on a 1 Morse taper shank part for the Atlas/Craftsman 6" lathe. The rated capacity of the drill chuck is 1mm to 13mm. You will have to cut the tang off the drill chuck arbor to suit your tailstock. A Dremel with a cut-off wheel works well to do this. The set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a wooden case. The carbide inserts are TCMT21.51. The carbide tipped 9-piece boring bar set includes 3 different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter. The P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This lathe tooling package includes 4 different sizes of combined drills and countersinks, commonly called center drills, and other Atlas Craftsman Lathe parts. The HSS center drill set includes sizes 1, 2, 3, and 4. These are 60° center drills; the sizes that are most used by bench top machinists.

5124 Tooling Package, Deluxe Mini Lathe

3/8" indexable TCMT inserts
9-piece carbide boring bar set - 3/8" shank
1/2" drill chuck, 2MT short to 33JT drill chuck arbor
4 center drills (sizes 1-4)
P1N cut-off blade

This package contains all the tooling you need to be productive with your HiTorque deluxe mini lathe on the first day you own it. The package does not include a quick change tool post because there is one on the model 4200/5200/7350 lathe. The 1/2" capacity drill chuck includes a 2 Morse taper shank arbor for the mini lathe. This chuck is specifically designed for the mini lathe tailstock. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). The set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a wooden case. The carbide inserts are TCMT21.51. The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter. The P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This package includes 4 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, and 4. These are 60 degree center drills. These are the sizes that are most used by bench top machinists.

5125 Tooling Package, Deluxe Mini Lathe Premium

1/2" professional grade drill chuck
2MT standard to 33JT drill chuck arbor
3/8"- 6" long indexable boring bar - CCMT inserts
3/8" indexable TCMT carbine inserts
Premium P1 cut-off blade, 5 center drills

This package contains our best versions of all the tooling you need to be productive with your HiTorque deluxe mini lathe. The package does not include a quick change tool post because there is one on the model 4200/5200/7350 deluxe lathe. Drill Chuck: The 1/2" capacity professional grade drill chuck is mounted on a short 2MT shank for the mini lathe. Specifically designed for the mini lathe tailstock, the rated capacity is 1 mm (0.039") to 13 mm (0.512"). All working parts are hardened. Chuck key included. Number 33 Jacobs taper mount. This chuck is comparable to a Jacobs 34-33 heavy duty drill chuck, including the runout specification of 0.004" (0.10 mm) or less. Indexable Inserts: Indexable turning tools are made by AR Warner Co in the USA. These Warner precision tool holder kits use carbide inserts and include three styles of tools, AR right hand, E Neutral (threading tool - 60 degree angle), and AL left hand. Kit includes three tool holders, TCMT inserts, one extra TCMT-21.52 carbide insert, one extra Torx screw, and one wrench. Boring Bar: This 3/8" diameter indexable boring bar uses CCMT inserts and is 6" long. The minimum bore diameter for this is 0.50". The boring bar takes CCMT 21.51 or CCMT 21.52 inserts. Cut-Off Blade: The premium P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS by Arthur R. Warner Co. in the USA. These T-shape parting blades provide great side clearance. Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks.

4009 Tooling Package, G0768, 8x12, 8x14 Lathes

0XA QCTP Set with Mounting Kit for G0768, 8x12 and 8x14 Lathes
3/8" Indexable TCMT Inserts, P1X Cut-Off Blade
1/2" Drill Chuck, 2MT Standard to 33JT Drill Chuck Arbor
9-piece carbide Boring Bar Set - 3/8" shank
Fits Grizzly G0768 lathe

This package contains all the tooling you need to be productive with your G0768, 8x12 or 8x14 lathe on the first day you own it. The quick change tool post set (QCTP) includes the tool post, mounting hardware, and 5 tool holders. This set includes the tool post and the following tool holders: 2 - #1 Turning and Facing 1 - #2 Boring, Turning and Facing 1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars 1 - #7 Universal Parting Blade (for 1/2 inch cut-off blade - 4 degree) The quick change tool post is a wedge-type made of all steel. No tools are required to change tools. Additional tool holders are available. This tool post mounts on the existing stud. On most 8x12 and 8x14 lathes you must reduce the height of the boss on the top of the compound. The turning tool holders accept tools with 1/4" to 1/2" shank. The boring tool holder accepts boring bars with up to 3/8" round shanks. The cut-off tool holder holds 1/2" tall parting blades. The 1/2" capacity drill chuck is mounted on a standard 2 Morse taper shank. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). The set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a wooden case. The carbide inserts are TCMT21.51. The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter. The P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This package includes 4 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, and 4. These are 60 degree center drills. These are the sizes that are most used by bench top machinists.

5671 Tooling Package, Grizzly G0758 Mill

3" precision milling vise (heavy) and 10 pairs of 3" long thin parallels
Precision 1-2-3 blocks and 20 piece end mill set - 2 and 4 flute (10 each)
58- piece clamping kit - 5/16"-18, 3/8" T-slots
Seven piece R8 collet set, five center drills - 60 degree countersinks
Combination edge and center finder and a T-slot cleaner

Tooling package with all the essentials for an R8 mini mill. Milling Vise: 3" Kurt-style milling vice. Top, gib, jaws, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances. Overall length is 10.85" and the height is 3.05". Jaws are 3.15" wide, 1.04" deep, open 3", and are perpendicular to the ways within 0.002" in 4". The ways are parallel to the base within 0.0006" in 4" without the swivel. Thin Parallels: Set of ten pairs, 1/8" thick x 3" long, in fitted case. Made of high-grade alloy steel hardened to 52-58 Rc, parallel within 0.0002" on top and bottom. Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" (pairs matched within 0.0004"). End Mills: 20 piece set included 2 flute and 4 flute center cutting TiN coated HSS end mills sizes 3/16" - 3/4" by 16ths. R8 Collets: Set of seven high-grade tool hardened steel, sizes 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4". 1-2-3 Blocks: Ground and hardened on all sides to 50-60 Rc, sizes 1" x 2" x 3". Parallel within 0.0002", flat within 0.0002", and square within 0.00021". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC. Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks.

5680 Tooling Package, Grizzly G0765 Mini Lathe

Specific items for 7x14 from Grizzly, Real Bull, and Big Dog
3/8" indexable TCMT inserts, P1N cut-off blade
9-piece carbide boring bar set - 3/8" shank
1/2" drill chuck, 2MT standard to 33JT drill chuck arbor
4 center drills (sizes 1-4)

This mini lathe tooling package contains all the tooling you need to be productive with your 7x14 mini lathe on the first day you own it. The Tormach 0XA quick change tool post set (QCTP). This mini lathe tooling package includes the tool post and the following tool holders: 2 - #1 Turning and Facing 1 - #2 Boring, Turning and Facing 1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars 1 - #7 Universal Parting Blade (for 1/2 inch cut-off blade - horizontal) The wedge type quick change tool post is made of steel and all working parts are hardened and ground. No tools are required to change tools. Additional tool holders are available. The turning tool holders accept tools with 1/4" to 1/2" shank. The boring tool holder accepts boring bars with 3/8" or 1/2" round shanks. The cut-off tool holder holds 1/2" tall parting blades. The 1/2" capacity drill chuck is mounted on a short 2 Morse taper shank for the mini lathe. This chuck is specifically designed for the mini lathe tailstock. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). The set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a wooden case. The carbide inserts are TCMT21.51. The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter. The P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This mini lathe tooling package includes 4 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, and 4. These are 60 degree center drills. These are the sizes that are most used by bench top machinists.

4217 Tooling Package, HiTorque Bench Lathe

0XA QCTP Set with post mount for SC4 Lathes
3/8" Indexable TCMT Inserts, P1 Cut-Off Blade
1/2" Drill Chuck, 2MT Standard to 33JT Drill Chuck Arbor
9-piece carbide Boring Bar Set - 1/2" shank
5 Center Drills (sizes 1-5)

This package contains all the tooling you need to be productive with your lathe on the first day you own it. It works with the LittleMachineShop.com HiTorque 8.5x16 or 8.5x20 bench lathes as well as other C4 and SC4 lathes. Includes a 0XA (Series 000) quick change tool post set (QCTP). This set includes the tool post and the following tool holders: 2 - #1 Turning and Facing 1 - #2 Boring, Turning and Facing 1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars 1 - #7 Universal Parting Blade (for 1/2 inch cut-off blade - horizontal) The quick change tool post is made from hardened steel. No tools are required to change tools. Additional tool holders are available. It may require some work in order to make a T-slot nut, to mount this QCTP on your lathe. The turning tool holders accept tools with 3/8" to 1/2" shank. The turning and boring tool holder accepts boring bars with up to 1/2" round shanks. The cut-off tool holder holds 1/2" tall parting blades. The 1/2" capacity drill chuck is mounted on a standard 2 Morse taper shank. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). The set of 3/8" shank indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a fitted case. The carbide inserts are TCMT21.51. The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter. The P1 parting blade is 5/64" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This package includes 5 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, 4, and 5. These are 60 degree center drills. These are the sizes that are most used by bench top machinists.

4857 Tooling Package, HiTorque Bench Lathe Premium

0XA QCTP set with post mount for SC4 lathes
1/2" professional grade drill chuck, 2MT standard to 33JT drill chuck arbor
1/2" indexable boring bar - CCMT inserts
3/8" indexable TCMT carbine inserts
Premium P1 cut-off blade, 5 center drills

This tooling package contains premium quality tooling for a C4, SC4 or LittleMachineShop.com HiTorque 8.5x16 bench lathes. Includes a 0XA (Series 000) quick change tool post set (QCTP). This set includes the tool post and the following tool holders: 2 - #1 Turning and Facing 1 - #2 Boring, Turning and Facing 1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars 1 - #7 Universal Parting Blade (for 1/2 inch cut-off blade - horizontal) QCTP features all steel construction and wedge type tool post for better clamping and repeatability. All working parts are hardened, ground and sealed. Designed for lathes with limited distance from the top of the compound to the center of the lathe. This tool post mounts with an M12/M10 stud for C4 and SC4 lathes, which is included. The 1/2" capacity professional grade drill chuck is mounted on a short 2MT shank for the mini lathe. Specifically designed for the mini lathe tailstock, the rated capacity is 1 mm (0.039") to 13 mm (0.512"). All working parts are hardened. Chuck key included. Number 33 Jacobs taper mount. This chuck is comparable to a Jacobs 34-33 heavy duty drill chuck, including the runout specification of 0.004" (0.10 mm) or less. Indexable turning tools are made by Arthur R. Warner Co. in the USA. These precision tool holder kits use carbide inserts and include three styles of tools, AR right hand, E Neutral (threading tool - 60 degree angle), and AL left hand. Kit includes three tool holders, TCMT inserts, one extra TCMT-21.52 carbide insert, one extra Torx screw, and one wrench. 1/2" diameter indexable boring bar uses CCMT inserts and is 7" long. The minimum bore diameter for this is 0.625". The boring bar takes CCMT 32.51 or CCMT 32.52 inserts. The premium P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS by Arthur R. Warner Co. T-shape parting blades provide great side clearance. Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree countersinks.

6475 Tooling Package, HiTorque Bench Lathe, AXA Post

AXA QCTP Set with post mount for SC4 Lathes
3/8" Indexable TCMT Inserts, P1 Cut-Off Blade
1/2" Drill Chuck, 2MT Standard to 33JT Drill Chuck Arbor
9-piece carbide Boring Bar Set - 1/2" shank
5 Center Drills (sizes 1-5)

**NOTE** Current C4/SC4 compound rest top must be swapped with the 4914 top that is included with this kit in order to mount the AXA post This package contains all the tooling you need to be productive with your lathe on the first day you own it. It works with the LittleMachineShop.com HiTorque 8.5x16 or 8.5x20 bench lathes as well as other C4 and SC4 lathes. Includes an AXA (Series 100) quick change tool post set (QCTP). This set includes the tool post and the following tool holders: 2 - #1 Turning and Facing 1 - #2 Boring, Turning and Facing 1 - #4 Heavy Duty Boring will hold both 5/8 and 3/4 boring bars 1 - #7 Universal Parting Blade (for 1/2 inch cut-off blade - horizontal) The quick change tool post is made from hardened steel. No tools are required to change tools. Additional tool holders are available. It may require some work in order to make a T-slot nut, to mount this QCTP on your lathe. The turning tool holders accept tools with 3/8" to 1/2" shank. The turning and boring tool holder accepts boring bars with up to 1/2" round shanks. The cut-off tool holder holds 1/2" tall parting blades. The 1/2" capacity drill chuck is mounted on a standard 2 Morse taper shank. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). The set of 3/8" shank indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a fitted case. The carbide inserts are TCMT21.51. The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter. The P1 parting blade is 5/64" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This package includes 5 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, 4, and 5. These are 60 degree center drills. These are the sizes that are most used by bench top machinists.

3164 Tooling Package, HiTorque Deluxe Bench Lathe

Tooling package for deluxe bench lathe
3/8" Indexable TCMT inserts, P1 cut-off blade
1/2" drill chuck, 2MT standard to 33JT drill chuck arbor
9-piece carbide boring bar set - 1/2" shank
5 center drills (sizes 1-5)

This package contains all the tooling you need to be productive with your lathe on the first day you own it. It works with the LittleMachineShop.com HiTorque 8.5x16 or 8.5x20 bench lathe as well as other C4 and SC4 lathes. The 1/2" capacity drill chuck is mounted on a standard 2 Morse taper shank. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). The set of 3/8" shank indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a fitted case. The carbide inserts are TCMT21.51. The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter. The P1 parting blade is 5/64" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This package includes 5 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, 4, and 4. These are 60 degree center drills. These are the sizes that are most used by bench top machinists. This tooling package does not include a quick change tool post because the HiTorque Deluxe Bench Lathe is equipped with a QCTP.

3389 Tooling Package, HiTorque Deluxe Bench Lathe Premium

Premium tooling package for deluxe bench lathe
1/2" professional grade drill chuck, 2MT standard to 33JT drill chuck arbor
1/2" indexable boring bar - CCMT inserts
3/8" indexable TCMT carbine inserts
Premium P1 cut-off blade, 5 center drills

This tooling package contains premium quality tooling for a C4, SC4 or LittleMachineShop.com HiTorque bench lathes. The 1/2" capacity professional grade drill chuck is mounted on a short 2MT shank for the mini lathe. Specifically designed for the mini lathe tailstock, the rated capacity is 1 mm (0.039") to 13 mm (0.512"). All working parts are hardened. Chuck key included. Number 33 Jacobs taper mount. This chuck is comparable to a Jacobs 34-33 heavy duty drill chuck, including the runout specification of 0.004" (0.10 mm) or less. Indexable turning tools are made by Arthur R. Warner Co. in the USA. These precision tool holder kits use carbide inserts and include three styles of tools, AR right hand, E Neutral (threading tool - 60 degree angle), and AL left hand. Kit includes three tool holders, TCMT inserts, one extra TCMT-21.52 carbide insert, one extra Torx screw, and one wrench. 1/2" diameter indexable boring bar uses CCMT inserts and is 7" long. The minimum bore diameter for this is 0.625". The boring bar takes CCMT 32.51 or CCMT 32.52 inserts. The premium P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS by Arthur R. Warner Co. T-shape parting blades provide great side clearance. Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks. This tooling package does not include a quick change tool post because the HiTorque Deluxe Bench Lathe is equipped with a QCTP.

4116 Tooling Package, Mini Lathe Premium

Tormach 0XA (Series 000) QCTP set
1/2" professional grade drill chuck, 2MT standard to 33JT drill chuck arbor
3/8"- 6" long Indexable boring bar - CCMT inserts
3/8" indexable TCMT carbide inserts
Premium P1 cut-off blade, 5 center drills

This package contains our best versions of all the tooling you need to be productive with your 7x10, 7x12, 7x14, or 7x16 mini lathe. QCTP: The 0XA (Series 000) quick change tool post features all steel construction and wedge type tool post for better clamping and repeatability. All working parts are hardened and ground. Sealed for maintenance-free operation. Tool holders designed for mini lathes and other lathes with limited distance from the top of the compound to the center of the lathe. This tool post mounts with an M10 stud, which is included. This set includes the tool post and the following tool holders: 2 - #1 Turning and Facing 1 - #2 Boring, Turning and Facing 1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars 1 - #7 Universal Parting Blade (for 1/2 inch cut-off blade - horizontal) Drill Chuck: The 1/2" capacity professional grade drill chuck is mounted on a short 2MT shank for the mini lathe. Specifically designed for the mini lathe tailstock, the rated capacity is 1 mm (0.039") to 13 mm (0.512"). All working parts are hardened. Chuck key included. Number 33 Jacobs taper mount. This chuck is comparable to a Jacobs 34-33 heavy duty drill chuck, including the runout specification of 0.004" (0.10 mm) or less. Indexable Inserts: Indexable turning tools are made by Arthur R. Warner Co. in the USA. These Warner precision tool holder kits use carbide inserts and include three styles of tools, AR right hand, E Neutral (threading tool - 60 degree angle), and AL left hand. Kit includes three tool holders, TCMT inserts, one extra TCMT-21.52 carbide insert, one extra Torx screw, and one wrench. Boring Bar: This 3/8" diameter indexable boring bar uses CCMT inserts and is 6" long. The minimum bore diameter for this is 0.50". The boring bar takes CCMT 21.51 or CCMT 21.52 inserts. Cut-Off Blade: The premium P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS by Arthur R. Warner Co. in the USA. These T-shape parting blades provide great side clearance. Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks.

5207 Tooling Package, Mini Lathe, 0XA QCTP

QCTP Set easily mounts to 7x10, 7x12, 7x14, 7x16 lathes
3/8" indexable TCMT inserts, P1N cut-off blade
9-piece carbide boring bar set - 3/8" shank
1/2" drill chuck, 2MT short to 33JT drill chuck arbor
4 center drills (sizes 1-4)

This package contains all the tooling you need to be productive with your 7x10, 7x12, 7x14 or 7x16 mini lathe on the first day you own it. The 0XA quick change tool post set (QCTP). This mini lathe tool set includes the tool post and the following tool holders: 2 - #1 Turning and Facing 1 - #2 Boring, Turning and Facing 1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars 1 - #7 Universal Parting Blade (for 1/2 inch cut-off blade - horizontal) The wedge type quick change tool post is made of steel and all working parts are hardened and ground. No tools are required to change tools. Additional tool holders are available. The turning tool holders accept tools with 1/4" to 1/2" shank. The boring tool holder accepts boring bars with 3/8" or 1/2" round shanks. The cut-off tool holder holds 1/2" tall parting blades. The 1/2" capacity drill chuck includes a 2 Morse taper shank arbor for the mini lathe. This chuck is specifically designed for the mini lathe tailstock. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). The set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a wooden case. The carbide inserts are TCMT21.51. The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter. The P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This package includes 4 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, and 4. These are 60 degree center drills. These are the sizes that are most used by bench top machinists.

3526 Tooling Package, R8 Bench Mill

4" Precision Milling Vise (Heavy) and 10 Pairs of 4" long thin parallels
Precision 1-2-3 Blocks and 20 piece End Mill Set - 2 and 4 Flute (10 each)
58- piece Clamping Kit - 3/8"-16, 7/16" T-Slots
Seven piece R8 Collet Set, five Center Drills - 60 degree countersinks
Combination Edge and Center Finder and a T-Slot Cleaner

Tooling package with all the essentials for an R8 bench mill. Milling Vise: Precision 4" Kurt-style milling vice. Top, gib, jaws, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances. Overall length is 13.4" and the height is 3.46". Jaws are 4" wide, 1.27" deep, open 4", and are perpendicular to the ways within 0.002" in 4". The ways are parallel to the base within 0.0006" in 4" without the swivel. Thin Parallels: Set of ten pairs, 1/8" thick x 4" long, in fitted case. Made of high-grade alloy steel hardened to 52-58 RC, parallel within 0.0002" on top and bottom. Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" (pairs matched within 0.0004"). End Mills: 20 piece set included 2 flute and 4 flute center cutting TiN coated HSS end mills sizes 3/16" - 3/4" by 16ths. R8 Collets: Set of seven high-grade tool hardened steel, sizes 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4". 1-2-3 Blocks: Ground and hardened on all sides to 50-60 RC, sizes 1" x 2" x 3". Parallel within 0.0002", flat within 0.0002", and square within 0.00021". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC. Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks.

5489 Tooling Package, R8 Bench Mill Premium

4" Precision milling, professional and 10 pairs of thin parallels
Thirteen piece R8 collets, 12 piece End Mill Set - 2 and 4 Flute Cobalt (6each)
58 - piece clamping kit - 3/8"-16, 7/16" T-slots
Premium precision 1-2-3 blocks, five center drills - 60° countersinks
Combination edge and center finder and a T-slot cleaner

Premium tooling package with all the best products for your R8 bench mill. Milling Vise: 4" Kurt-style professional milling vice with detachable 360 degree swivel base and easy to read divisions. Top, gib, jaws, swivel base, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances. Overall length is 11.6" and the height is 3.1" without base, and 4.3" with base. Jaws are 3.15" wide, 0.9" deep, open 3", and are perpendicular to the ways within 0.0004" in 4". The ways are parallel to the base within 0.0003" in 4" without the swivel. Thin Parallels: Set of ten 4" pairs, 1/8" thick. Made of high-grade alloy steel hardened to 52-58 Rc, parallel within 0.0003" on top and bottom. Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" End Mills: 12 piece End Mill Set - 2 and 4 Flute Cobalt (6 each). R8 Collets: 13 R8 round collets sizes 1/8" to 1" by 16ths. Made of high grade tool steel, hardened and ground to a TIR of 0.0005" or less. This set includes all the sizes required for common end mills. 1-2-3 Blocks: Premium precision 1-2-3 blocks, ground and case hardened on all sides to 55-60 Rc. Blocks are 1" x 2" x 3" parallel, flat, and square within 0.0001". Set includes two matched blocks and 5 cap screws. Blocks have 23 holes, five are threaded 3/8"-16 NC. Center Drills: Five piece M42 8% cobalt combined drills and countersinks sizes 1, 2, 3, 4, and 5 with 60 degree countersinks.

6301 Tooling Package, R8 Bench Mill, Tormach TTS Tooling

4" Precision Milling Vise (Heavy) and 10 Pairs of 4" long thin parallels
Precision 1-2-3 Blocks and 20 piece End Mill Set - 2 and 4 Flute (10 each)
58- piece Clamping Kit - 3/8"-16, 7/16" T-Slots
Combination Edge and Center Finder and a T-Slot Cleaner
Includes Tormach TTS Manual Starter Set

You don't need a CNC to take advantage of the Tormach Tooling System. Manual operations benefit from quick change, reduced clearance, and increased rigidity. This tooling package includes a basic set that will introduce you to all of those features. The manual mill operators set improves productivity in manual milling. Tooling package with all the essentials for an R8 bench mill. Milling Vise: Precision 4" Kurt-style milling vice. Top, gib, jaws, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances. Overall length is 13.4" and the height is 3.46". Jaws are 4" wide, 1.27" deep, open 4", and are perpendicular to the ways within 0.002" in 4". The ways are parallel to the base within 0.0006" in 4" without the swivel. Thin Parallels: Set of ten pairs, 1/8" thick x 4" long, in fitted case. Made of high-grade alloy steel hardened to 52-58 RC, parallel within 0.0002" on top and bottom. Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" (pairs matched within 0.0004"). End Mills: 20 piece set included 2 flute and 4 flute center cutting TiN coated HSS end mills sizes 3/16"-3/4" by 16ths. R8 Collets: Set of seven high-grade tool hardened steel, sizes 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4". 1-2-3 Blocks: Ground and hardened on all sides to 50-60 RC, sizes 1" x 2" x 3". Parallel within 0.0002", flat within 0.0002", and square within 0.00021". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC. Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks. The Tormach Tooling System Starter Set includes two set screw end mill adapters, one ER-20 collet chuck with three collets, a TTS R8 collet, a 1/4" drill chuck, plus wrenches and installation tools.

4212 Tooling Package, R8 CNC Mini Mill

3" precision milling vise (Heavy) and 10 pairs of 3" long thin parallels
Five piece R8 end mill holders, 20 piece end mill set - 2 and 4 flute (10 each)
58-piece clamping kit - 3/8"-16, 7/16" T-slots
Precision 1-2-3 blocks, five center drills - 60° countersinks
Combination Edge and Center Finder and a T-Slot Cleaner

Tooling package with all the essentials for an R8 CNC Mini Mill. Milling Vise: 3" Kurt-style milling vice. Top, gib, jaws, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances. Overall length is 10.85" and the height is 3.05". Jaws are 3.15" wide, 1.04" deep, open 3", and are perpendicular to the ways within 0.002" in 4". The ways are parallel to the base within 0.0006" in 4" without the swivel. Thin Parallels: Set of ten pairs, 1/8" thick x 3" long, in fitted case. Made of high-grade alloy steel hardened to 52-58 Rc, parallel within 0.0002" on top and bottom. Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" (pairs matched within 0.0004"). End Mills: 20 piece set included 2 flute and 4 flute center cutting TiN coated HSS end mills sizes 3/16"-3/4" by 16ths. The 5-piece end mill holder set includes adapters for end mills with shank diameters of 3/16, 3/8, 1/2, 5/8, and 3/4 inches. The end mill holders have an R8 shank and use the drawbar that comes with the mini mill. This set includes all the sizes required for common end mills. 1-2-3 Blocks: Ground and hardened on all sides to 50-60 Rc, sizes 1" x 2" x 3". Parallel within 0.0002", flat within 0.0002", and square within 0.00021". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC. Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks.

5534 Tooling Package, R8 Large Bench Mill

5" Precision Milling Vise (Heavy) and 10 Pairs of 4" long thin parallels
Precision 1-2-3 Blocks and 20 piece End Mill Set - 2 and 4 Flute (10 each)
58- piece Clamping Kit - 3/8"-16, 7/16" T-Slots
Seven piece R8 Collet Set, five Center Drills - 60 degree countersinks
Combination Edge and Center Finder and a T-Slot Cleaner

Tooling package with all the essentials for an R8 large bench mill. Milling Vise: Precision 5" Kurt-style milling vice. The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground. The jaws are hardened and ground. The fixed jaw is bolted from the top for enhanced rigidity. The jaws are 5" wide, 1.58" deep and open 5.71". Without the swivel base, the ways of the precision milling vise are parallel to the base of the vise within 0.0006" in 4". The jaws are perpendicular to the ways within 0.002" in 4". With the swivel base installed, the ways of the vise are parallel to the base of the vise within 0.0008" in 4". Thin Parallels: Set of ten pairs, 1/8" thick x 5" long, in fitted case. Made of high-grade alloy steel hardened to 52-58 RC, parallel within 0.0002" on top and bottom. Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" (pairs matched within 0.0004"). End Mills: 20 piece set included 2 flute and 4 flute center cutting TiN coated HSS end mills sizes 3/16" - 3/4" by 16ths. R8 Collets: Set of seven high-grade tool hardened steel, sizes 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4". 1-2-3 Blocks: Ground and hardened on all sides to 50-60 RC, sizes 1" x 2" x 3". Parallel within 0.0002", flat within 0.0002", and square within 0.00021". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC. Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks.

5535 Tooling Package, R8 Large Bench Mill Premium

5" Precision milling, professional and 10 pairs of thin parallels
Thirteen piece R8 collets, 12 piece End Mill Set - 2 and 4 Flute Cobalt (6 each)
58 - piece clamping kit - 3/8"-16, 7/16" T-slots
Premium precision 1-2-3 blocks, five center drills - 60° countersinks
Combination edge and center finder and a T-slot cleaner

Premium tooling package with all the best products for your R8 large mini mill. Milling Vise: Precision 5" Kurt-style milling vice. The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground. The jaws are hardened and ground. The fixed jaw is bolted from the top for enhanced rigidity. The jaws are 5" wide, 1.58" deep and open 5.71". Without the swivel base, the ways of the precision milling vise are parallel to the base of the vise within 0.0006" in 4". The jaws are perpendicular to the ways within 0.002" in 4". With the swivel base installed, the ways of the vise are parallel to the base of the vise within 0.0008" in 4". Thin Parallels: Set of ten pairs, 1/8" thick. Made of high-grade alloy steel hardened to 52-58 Rc, parallel within 0.0003" on top and bottom. Parallel heights: 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16" (pairs matched within 0.0003"). End Mills: 12 piece End Mill Set - 2 and 4 Flute Cobalt (6 each). R8 Collets: 13 R8 round collets sizes 1/8" to 1" by 16ths. Made of high grade tool steel, hardened and ground to a TIR of 0.0005" or less. This set includes all the sizes required for common end mills. 1-2-3 Blocks: Premium precision 1-2-3 blocks, ground and case hardened on all sides to 55-60 Rc. Blocks are 1" x 2" x 3"; parallel, flat, and square within 0.0001". Set includes two matched blocks and 5 cap screws. Blocks have 23 holes, five are threaded 3/8"-16 NC. Center Drills: Five piece M42 8% cobalt combined drills and countersinks sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks.

3859 Tooling Package, R8 Large Bench Mill, Tormach TTS Tooling

Everything you need to use your mill with the Tormach Tooling System
Workholding - 5" precision CNC milling vise, parallels, clamping kit, 1-2-3 blocks
Cutting tools - end mills and center drills
More - edge finder, vise mounting kit, T-slot cleaner
Includes Tormach TTS Manual Starter Set (Inch)

You don't need a CNC to take advantage of the Tormach Tooling System. Manual operations benefit from quick change, reduced clearance, and increased rigidity. This tooling package includes a basic set that will introduce you to all of those features. The manual mill operators set improves productivity in manual milling. The precision 5" lock-down CNC milling machine vise features a compact size that allows multiple vises on CNC mill table. The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground. The hardened and ground replaceable jaws on this vise are 4" wide, 1.46" deep, and open 4.2". The vise is 11.2" long. The vise is 3.94" high. The replaceable jaws can be mounted on either end of the fixed and movable jaw supports providing a wide range of clamping distances. The set of ten pairs of thin parallels come in a fitted case. They are 1/8" thick and 6" long. The heights are 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8". The parallels are made of high grade alloy steel hardened to 52-58 Rc. They are parallel within 0.0002" on the top and bottom. The pairs are matched in height within 0.0004" The 20 piece TiN coated HSS end mill set includes both 2 flute and 4 flute end mills. The center cutting end mills are 3/16" to 3/4" by 16ths. The set comes in a fitted case. The precision 1-2-3 blocks are ground and case hardened on all sides to 50-60 Rc. The blocks are 1" by 2" by 3". They are parallel within 0.0002", flat within 0.0002" and square within 0.00021". The set includes two matched blocks. The blocks have 23 holes through them, 5 are threaded 3/8-16 NC. This package includes 5 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1,2,3, 4, and 5. These are 60 degree center drills. The Tormach Tooling System Starter Set includes two set screw end mill adapters, one ER-20 collet chuck with three collets, a TTS R8 collet, a 1/4" drill chuck, plus wrenches and installation tools.

3489 Tooling Package, R8 Mini Mill

3" precision milling vise (heavy) and 10 pairs of 3" long thin parallels
Precision 1-2-3 blocks and 20 piece end mill set - 2 and 4 flute (10 each)
58- piece clamping kit - 3/8"-16, 7/16" T-slots
Seven piece R8 collet set, five center drills - 60 degree countersinks
Combination edge and center finder and a T-slot cleaner

This mill tooling package comes with all the essentials for an R8 mini mill. Milling Vise: 3" Kurt-style milling vice. Top, gib, jaws, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances. Overall length is 10.85" and the height is 3.05". Jaws are 3.15" wide, 1.04" deep, open 3", and are perpendicular to the ways within 0.002" in 4". The ways are parallel to the base within 0.0006" in 4" without the swivel. Thin Parallels: Set of ten pairs, 1/8" thick x 3" long, in fitted case. Made of high-grade alloy steel hardened to 52-58 Rc, parallel within 0.0002" on top and bottom. Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" (pairs matched within 0.0004"). End Mills: 20 piece set included 2 flute and 4 flute center cutting TiN coated HSS end mills sizes 3/16" - 3/4" by 16ths. R8 Collets: Set of seven high-grade tool hardened steel, sizes 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4". 1-2-3 Blocks: Ground and hardened on all sides to 50-60 Rc, sizes 1" x 2" x 3". Parallel within 0.0002", flat within 0.0002", and square within 0.00021". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC. Center Drills: Five sizes combined drills and countersinks made of high-speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks.

4491 Tooling Package, R8 Mini Mill Essentials

3" precision milling vise, 4 pairs of 3" parallels
58 - piece clamping kit - 3/8"-16, 7/16" T-slots
Ten piece end mill set - 2 and 4 flute
Five piece R8 collet set, four center drills - 60 degree countersinks
Combination edge and center finder and a T-slot cleaner

Tooling package with the basic tooling for an R8 mini mill. Milling Vise: The precision 3" Kurt-style milling machine vise has a detachable swivel base that features easy to read divisions. The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground. The hardened and ground replaceable jaws on this vise are 3.15" wide, 0.93" deep, and open 2.83". The vise is 10.24" long. Without the base, the vise is 2.91" high. With the base, the vise is 3.94" high. The replaceable jaws can be mounted on either end of the fixed and movable jaw supports providing a wide range of clamping distances. The thin parallels are 5/32" thick and 3" long. The heights are 1/2", 5/8", 3/4", and 7/8". They are parallel within 0.0002" on the top and bottom. The pairs are matched in height within 0.0004". End Mills: The 10 piece TiN coated HSS end mill set includes both 2 flute and 4 flute end mills. The center cutting end mills are 1/4" to 3/4" by 8ths. The set comes in a fitted case. R8 Collets: Set of five R8 round collets includes the sizes 3/16", 3/8", 1/2", 5/8", 3/4". They are made of high grade tool steel, hardened and ground to close tolerance. Center Drills: Four sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, and 4 with 60 degree counter sinks.

4723 Tooling Package, R8 Mini Mill Precision

3" Toolmakers screwless vise and 11 pairs of 3" long thin parallels
Precision 1-2-3 blocks and 20 piece end mill set - 2 and 4 flute (10 each)
58- piece clamping kit - 3/8"-16, 7/16" T-slots
Seven piece R8 collet set, five center drills - 60 degree countersinks
Combination edge and center finder and a T-slot cleaner

Tooling package with all the essentials for an R8 mini mill. Toolmakers Vise: 3" toolmakers screwless vice has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002". There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects. The vise jaws are 1.38" deep and open to 3.78" capacity. The vise is 7.28" long, 2.76" tall and 2.785" wide. The set of 11 pairs of thin parallels are 1/8" thick and 3" long. The heights are 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" with two pairs of shims are 9/64" and 5/32". They are made of high grade alloy steel hardened to 52 to 58 Rc. The top and bottom surfaces are parallel within 0.0002". The pairs are matched in height within 0.0004". End Mills: 20 piece set included 2 flute and 4 flute center cutting TiN coated HSS end mills sizes 3/16" - 3/4" by 16ths. R8 Collets: Set of seven high-grade tool hardened steel, sizes 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4". 1-2-3 Blocks: Ground and hardened on all sides to 50-60 Rc, sizes 1" x 2" x 3". Parallel within 0.0002", flat within 0.0002", and square within 0.00021". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC. Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks.

4858 Tooling Package, R8 Mini Mill Premium

3" Milling vise and 10 pairs of 3" long, high grade, thin parallels
Thirteen piece R8 collets, 20 piece End Mill Set - 2 and 4 Flute (10 each)
58 - piece clamping kit - 3/8"-16, 7/16" T-slots
Premium precision 1-2-3 blocks, five center drills - 60 degree countersinks
Combination edge and center finder and a T-slot cleaner

Premium mini mill R8 tooling package with all the best products for your machine. Precision Milling Machine Vise: 3" Kurt-style milling vice with detachable 360° swivel base and easy to read divisions. Top, gib, jaws, swivel base, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances. Overall length is 10.85" and the height is 3.05" without base, and 4.21" with base. Jaws are 3.15" wide, 0.94" deep, open 3", and are perpendicular to the ways within 0.002" in 4". The ways are parallel to the base within 0.0006" in 4" without the swivel. Thin Parallels: Set of ten pairs, 1/8" thick x 3" long. Made of high-grade alloy steel hardened to 52-58 Rc, parallel within 0.0001" on top and bottom. Parallel heights: 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16"(pairs matched within 0.0002"). End Mills: 20-piece End Mill Set - 2 and 4 Flute (10 each). R8 Collets: 13 R8 round collets sizes 1/8" to 1" by 16ths. Made of high-grade tool steel, hardened and ground to a TIR of 0.0005" or less. This set includes all the sizes required for common end mills. 1-2-3 Blocks: Premium precision 1-2-3 blocks, ground and case hardened on all sides to 55-60 Rc. Blocks are 1" x 2" x 3"; parallel, flat, and square within 0.0001". Mini mill tooling package set includes two matched blocks and 5 cap screws. Blocks have 23 holes, five are threaded 3/8"-16 NC. Center Drills: Five-piece M42 8% cobalt combined drills and countersinks sizes 1, 2, 3, 4, and 5 with 60-degree counter sinks.

3527 Tooling Package, Small Lathe

AXA (Series 100) Quick Change Tool Post Set
1/2" Indexable TCMM Inserts, P1X Cut-Off Blade
1/2" Drill Chuck, 2MT Standard to 33JT Drill Chuck Arbor
9-piece carbide Boring Bar Set - 1/2" shank
5 Center Drills (sizes 1-5)

This package contains all the tooling you need to be productive with your lathe on the first day you own it. The AXA (Series 100) quick change tool post set (QCTP) includes the tool post, mounting hardware, a turning and facing tool holder, a boring, turning and facing tool holder, a heavy duty boring bar holder, a universal parting blade holder, and a knurling, facing and turning tool holder. The quick change tool post is made from hardened steel. No tools are required to change tools. Additional tool holders are available. It requires some level of work, tapping a hole, or making a T-slot nut, to mount this QCTP on your lathe. The turning tool holders accept tools with 3/8" to 1/2" shank. The turning and boring tool holder accepts boring bars with up to 1/2" round shanks. The cut-off tool holder holds 1/2" tall parting blades. The 1/2" capacity drill chuck is mounted on a standard 2 Morse taper shank. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). The set of 1/2" shank indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a fitted case. The carbide inserts are TCMM-321. The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter. To mount these boring bars, use the #2 tool holder (the holder with the concave bottom. This tool holder is designed to hold round stock and is the proper holder for smaller boring bars and is therefore called a Turning & Boring Tool Holder. The dedicated boring bar holder that comes in the AXA set holds 5/8" and 3/4" which we feel are too large for a lathe of this size. This holder is too big for the boring bars in this set and will not hold the 1/2" shanks securely (use the #2 holder). The P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This package includes 5 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, 4, and 5. These are 60 degree center drills. These are the sizes that are most used by bench top machinists.