|
On Sale
Value Packs
New Products
Catalog
Our Store
|
|
Woodworking Tools
While we specialize in tools for machinists, we have some "crossover" tools that woodworkers use too. |
2747 Center Finder, Drill Press PEC
- Accurately and quickly locates center on cylindrical workpieces
- Satin chrome finish
- Place tool in drill chuck or collet and line up pointer with line scribed on shaft
- 3/8" diameter shank
Drill press center finder made in the US by Products Engineering Corporation (PEC).
The drill press center finder is a quick way to find the approximate center of cylindrical objects. Line the pointer up with the mark and the drill chuck is centered over the work. |
|
2186 Center It V-Block
- CENTER IT makes it easy to drill round stock and tubing
- Bolts to the drill press table and enables the drilling of round pieces parallel and centered
- Grooves on the outer sides eliminate slippage while holding by hand for sawing
- Place CENTER IT on the drill press table, run the stationary bit down to center the fixture
CENTER IT is a tool for drilling pipe and other round objects. CENTER IT is made specifically for use in a drill press. No clamping of the tube is necessary since the angled flats of the jig hold it centered. Holes will automatically be centered on the tube with no center-punching required. If tubing is too large to drill in a single operation it can simply be turned over.
Especially for the metalworking enthusiast, the woodworking hobbyist, and even the professional automotive mechanic, CENTER IT makes speedy and precise work of drilling tasks. Its "hand vise" grip ridges allow no-clamp holding of round stock for sawing and cutting.
CENTER IT is made of heavy aluminum extrusion.
CNETER IT is 5" Long, 4" Wide, and 1-3/4" High. |
|
1250 Combination Square Set, 12"
- 12" combination square set
- Includes square head, center head, and protractor head
- Stainless steel blade with graduations of 8ths, 16ths, 32nds, and 64ths
This 4-Piece combination square set features a stainless steel blade, and includes a square head, a center head, and a protractor. |
|
2738 Combination Square Set, PEC 12"
- Combination square with 12" machinist's blade, square/miter head, protractor head, and center head
- Easy to read satin chrome finish blade is fully hardened and tempered
- 4R graduations, 8ths & 16ths, 32nds & 64ths. Protractor graduated 0-180 degrees in both directions
- Heads have hammertone powder-coat finish
- Square/miter head includes level vial and hardened scribe tool
Combination square made in the US by Products Engineering Corporation (PEC). |
|
3171 Combination Square Set, Starrett 12"
- Starrett 12" combination square set
- Starrett catalog number 9-12-4R
- Includes square head, center head, and protractor head
- Graduation No. 4R- 8ths, 16ths, Quick Reading 32nds, 64ths
The combination square set has reversible lock bolts, scriber, spirit level in both square head and protractor head, direct reading double 180° protractor scale, hardened steel, machine-divided blade. Cast iron heads with black wrinkle finish.
The blade is 1" wide and 3/32" thick. |
|
1838 Combination Square Set, Starrett 12"
- Starrett 12" combination square set
- Includes square head, center head and reversible protractor head
- Starrett catalog number 435-12-4R
- Graduation No. 4R- 8ths, 16ths, Quick Reading 32nds, 64ths
The combination square set has reversible lock bolts, scriber, spirit level in both square head and protractor head, direct reading double 180° protractor scale, hardened steel, machine-divided blade. Cast iron heads with black wrinkle finish.
The blade is 1" wide and 3/32" thick. |
|
2656 Combination Square Set, Starrett 6"
- Starrett 6" junior combination square set
- Includes square head and center head
- Starrett catalog number 33JHC-6-4R
- Graduation No. 4R- 8ths, 16ths, Quick Reading 32nds, 64ths
Starrett catalog number 33JHC-6-4R.
Starrett 6" junior combination square set with square head and centering head and blade.
These squares are used by mechanics, toolmakers and patternmakers because of their compact, small size and light weight. Both blade and heads are smaller than on regular squares. Heads are drop forged, hardened steel and have smooth, black enamel finish.
The blade is 3/4" wide and 5/64" thick. |
|
1839 Combination Square, Starrett 12"
- Starrett 12" combination square with square head
- Starrett catalog number 11H-12-4R
- Graduation No. 4R- 8ths, 16ths, Quick Reading 32nds, 64ths
The square has a reversible lock bolt, scriber, spirit level, and hardened steel, machine-divided blade with regular finish. Cast iron head with black wrinkle finish.
The blade is 1" wide and 3/32" thick. |
|
2451 Combination Square, Starrett 4"
- Starrett 4" combination square with square head
- Starrett catalog number 11H-4-4R
- Graduation No. 4R- 8ths, 16ths, Quick Reading 32nds, 64ths
Starrett catalog number 11H-4-4R.
The square has a reversible lock bolt, scriber, spirit level, and hardened steel, machine-divided blade with regular finish. Cast iron head with black wrinkle finish.
The blade is 5/8" wide and 1/16" thick. |
|
1782 Dial Indicator, Magnetic Base & Point Set
- 0-1" dial indicator with 0.001" resolution
- Magnetic base indicator holder with fine adjustment
- 22 piece indicator point set
- All in a plastic case
This 1" stroke dial indicator features large, easy to read numbers and crisp graduations.
Each revolution is 0.100", indicated by the revolution counter. The resolution is 0.001". There is a mounting lug on the back of the case.
The magnetic base indicator holder has a fine adjustment feature. The on/off switch makes it easy to position. The v-groove base allows you to mount it on cylindrical surfaces.
Includes a 22 piece indicator point set and a plastic case.
|
|
2741 Double Square, PEC 6"
- Double square with 6" blade
- Easy to read satin chrome finish blade is fully hardened and tempered
- 4R graduations, 8ths & 16ths, 32nds & 64ths
- Head has hammertone powder-coat finish
Double square made in the US by Products Engineering Corporation (PEC). |
|
2025 Double Square, Starrett 6"
- Starrett 6" double square with graduated blade
- Starrett catalog number 13C
- Popular with machinists, toolmakers, and patternmakers
- The head is approximately 3-1/2" (90 mm) long
- The faces are approximately 9/16" (14 mm) wide
The sliding blades are adjustable making it more practical for a wide variety of uses than a common square with fixed blade. The faces of the head are ground square, and the 6" (150 mm) size has a level.
The beveled blade and the drill grinding blade shown at the bottom of the photo are not included with this product. |
|
1148 Drill Chuck, 1/2" with 2MT Short Arbor
- 1/2" capacity drill chuck
- Mounted on a short 2 Morse taper shank for the mini lathe
- Fits Jet 1014 mini wood lathe
This chuck is specifically designed for the mini lathe tailstock.
The rated capacity of this chuck is 1 mm (0.039") to 13 mm (0.512"). |
|
3557 Drill Point Gage, Starrett
- Starrett Drill Point Gage, 59° Bevel, 32nds Grad
- Starrett catalog number 22C
- The head is beveled to 59° (the correct drill point angle)
- Graduated in 32nds along the 59° face for measuring the drill lips
This gage was designed specifically for use in drill grinding. It provides a quick, accurate way for determining the correct drill point angle of 59° and the correct length of drill lips necessary for clean-cut drilling at maximum feeds and speeds.
The sliding head may be adjusted to any position along the rule and locked by a thumb nut.
The head is beveled to 59° (the correct drill point angle), and is also graduated in 32nds along the 59° face for measuring the drill lips which should be of equal lengths.
The hook rule has accurate, machine-divided graduations in 8ths, 16ths, quick-reading 32nds and 64ths.
Hook is adjustable and can be shortened or extended on either side of the rule, and may also be removed if desired.
Tool can also be used as a Plain Rule, Hook Rule, Depth Gage, and Slide Caliper. The No. 22D Head-only will fit all steel rules 3/4" wide by 3/64" thick |
|
3977 Drill Set, #61-80 Jobber Length HSS
#61 to 80 high speed steel drill set.
Set includes number drills from 61 to 80.
These are jobbers length drills with straight shanks. Jobbers length drills are normal length drills.
Includes a metal index for storing the drills. |
|
3590 Drill Set, 21 Piece Turbomax Tip
- 1/16" through 3/8" by 1/64"
- Revolutionary tip design stays sharper longer and drills up to 28 percent faster
- Three-flatted shank design provides better chuck grip and reduces slippage
- M-2 high speed steel for the best combination of strength, heat resistance, and wear resistance
- Gold oxide finish. Made in US
High speed steel drill bit set with Turbo Point tip.
21-piece set in metal index case includes drill bit sizes 1/16" through 3/8" in 1/64" increments.
These are jobbers length drills with three-flatted shanks on larger sizes. Jobbers length drills are normal length drills.
Three-flatted shank design is ideal for use in keyless chucks. |
|
2828 Drill Set, 29 Piece Jobber Length HSS
- Imported
- Surface treated black finish
- 118º point
29 Piece high speed steel drill set.
Set includes 1/16" - 1/2" by 64ths.
These are jobbers length drills with straight shanks. Jobbers length drills are normal length drills.
Includes a metal index for storing the drills. |
|
2829 Drill Set, 29 Piece Jobber Length HSS
- Made in USA
- Surface treated black finish
- Heavy duty 135º split point
29 Piece high speed steel drill set.
Set includes 1/16" - 1/2" by 64ths.
These are jobbers length drills with straight shanks. Jobbers length drills are normal length drills.
Includes a Huot metal index for storing the drills. |
|
3591 Drill Set, 29 Piece Turbomax Tip
- 1/16" through 1/2" by 1/64"
- Revolutionary tip design stays sharper longer and drills up to 28 percent faster
- Three-flatted shank design provides better chuck grip and reduces slippage
- M-2 high speed steel for the best combination of strength, heat resistance, and wear resistance
- Gold oxide finish. Made in US
High speed steel drill bit set with Turbo Point tip.
29-piece set in metal index case includes drill bit sizes 1/16" through 1/2" in 1/64" increments.
These are jobbers length drills with three-flatted shanks on larger sizes. Jobbers length drills are normal length drills.
Three-flatted shank design is ideal for use in keyless chucks. |
|
3124 Electronic Digital Caliper, 6" Fractions
- 6", 150 mm range
- 1/64", 0.0005", 0.01 mm resolution
- 1/64", 0.001", 0.02 mm accuracy
- Reads fractions, inches or mm. Great for woodworkers
- PEC Brand
This 6" electronic digital caliper has manual power on and off.
There are three buttons.
OFF/ON: Turns the power on and off.
ZERO: Sets the readout to zero at any position.
MM/INCH/FRAC: Switches between fractional inch, decimal inch and metric display.
Some fractional calipers read to 1/128". That's too fine a measure for use with wood, which expands and contracts more than that. These calipers read to 1/64", which is precise enough, without the bother of figuring out if 97/128" is larger or smaller than 3/4".
Furnished with a fitted case. |
|
2891 Grinder, Proxxon IB/E Professional Rotary Tool
- Ball bearing spindle of ground steel, with lock button for rapid cutter changing
- Streamlined die-cast aluminum head for exact bearing seats and optimal stability
- Powerful 100 W motor with full-wave electronics for variable speeds between 5,000 and 20,000 rpm
- Complete with six triple-slit steel collets covering 1/32'' to 1/8'' (1.0 - 3.2 mm)
- Two year limited warranty
Grinder with 34 industrial quality bits & cutters with shanks Ø 3/32'' (2.3 mm). High concentricity (maximum run out .001'').
This high-revving motor is usable for extended periods at a time. 120V AC, 60 Hz
The ground steel spindle runs in a ball bearing assembly, minimizing play. Six high concentricity collets sized 1/32'', 1/16'', 5/64'', 3/32'', 7/64'' and 1/8'' (1.0, 1.5, 2.0, 2.4, 3.0 and 3.2 mm) along with a collet nut are included.
Packed in durable plastic case, complete with the 34 bits & cutters as shown above. |
|
2351 Hand and Bench Vise, Starrett
- Starrett combination hand and bench vise
- Starrett catalog number 86A
- Use as a hand vise or a bench vise
- Wide range of uses for all toolmakers, mechanics, hobbyists and do-it-yourselfers
- Approximately 1/2-2 1/8" (13-54 mm) in thickness
This combination hand and bench vise has a wide range of uses for all toolmakers, mechanics, hobbyists and do-it-yourselfers. When a vise is needed at different locations for convenience, this tool is indispensable. By removing the handle and substituting the clamp, the tool may be fastened to benches, shelves, and so on.
It is approximately 1/2-2 1/8" (13-54 mm) in thickness, and can be adjusted to different positions according to the user's preference.
When used as a hand vise, the leverage obtainable with the ball end lever will be appreciated in comparison with a wing nut commonly employed for this purpose. The jaws are made from forgings and are properly tempered. |
|
1189 Live Center, 2MT Short
- Point is a 60º included angle
- Short 2 Morse taper for the mini lathe
- Fits Jet 1014 mini wood lathe
This center fits the tailstock of the mini lathe.
The point is a 60º included angle. |
|
2735 Steel Rule, 12" 4R Rigid, PEC
- 4R graduations, 8ths & 16ths, 32nds & 64ths
- Made from the finest quality steel available
- Fully hardened and tempered with stain chrome finish
- Precisely etched, then black filled for readability
- Rule is 3/4" wide and 0.040" thick
Rigid steel rule made in the US by Products Engineering Corporation (PEC). |
|
1234 Steel Rule, 6"
- 4R graduations, 8ths & 16ths, 32nds & 64ths
- Hardened stainless steel
This precision, 6" long steel rule is flexible to fit into tight spots. The etched black graduations are easy to read against the non-glare finish. |
|
2734 Steel Rule, 6" 4R Rigid, PEC
- 4R graduations, 8ths & 16ths, 32nds & 64ths
- Made from the finest quality steel available
- Fully hardened and tempered with stain chrome finish
- Precisely etched, then black filled for readability
- Rule is 3/4" wide and 0.040" thick
Rigid steel rule made in the US by Products Engineering Corporation (PEC). |
|
2233 Steel Rule, 6" 4R Rigid, Starrett
- 4R Graduations - 8ths, 16ths, quick-reading 32nds and 64ths.
- Starrett catalog number C604R-6
- Rule is 3/4" wide and 3/64" thick
- Spring-tempered steel rule
All Starrett precision steel rules are machine-divided, not photoengraved. They are inspected to Starrett Master Standards, which are traceable to the National Institute of Standards and Technology. |
|
3028 Universal Bevel, PEC
- Six inch long blade
- Set to any angle
- Stainless steel
- Made in USA
This high-accuracy T-bevel features both straight slots and offset slots in the blade and straight slots in the stock. This combination allows for the widest possible variety of adjustments.
Align the T-bevel with the angle you want to duplicate, then tighten the knurled locking nut. |
|
2227 Universal Bevel, Starrett
- Starrett Universal Bevel
- Starrett catalog number 47
- Wide variety of adjustment and angle settings
- Blade is 6" (150 mm) long
This improved Universal Bevel has both offset and straight slots in the blade, in combination with straight slots in the stock that allow for a wide variety of adjustment and angle settings that are impossible to obtain with many ordinary bevels.
Length of the blade is 6" (150 mm), and the stock, 3 1/2" (90 mm). The stock lies flat on the work or paper since the head of the clamping bolt is recessed. This tool can be set to duplicate an angle from a master, or it may be easily converted into a Bevel Protractor by using this tool with the No. 193 Protractor (PN 1833). |
|
3899 Vise, 4" Cross-Sliding
- 4" travel in both X and Y directions
- Multiple bolt slots in base for easy mounting
- Dials graduated in 0.001" increments
- Balanced ball crank handles
Jaws are 4" wide, 1.44" deep, and open to 3.75". The base is 5" x 10.5".
This is a better version of the vise that is mentioned in the April/May 2010 issue of American Woodworker. |
|
2252 Wooden Base, 6 x 12
- Finished wooden base to display models
Wooden base for horizontal Stirling engine models. |
|
2251 Wooden Base, 6 x 6
- Finished wooden base to display models
Wooden base for vertical Stirling engine model. |
|
