QC Cut-Off Tool holder, Economy 1649 (Discontinued)

Part Number: 1649 (Discontinued)
Weight: 0.76 lb

Price: $28.95

Share this page:
http://lmscnc.com/1649

This cut-off, or parting tool holder fits our 1147 Quick Change Tool holder Set. It works with 1/2" tall cut-off blades.

Chris' Tips

Chris' Tips
P-type cut-off (or parting) blades are T-shaped (don't ask). Because the body of the tool is narrower than the cutting tip, friction is reduced making the difficult task of parting off somewhat easier.

Size P1 blades are 1/16" wide and are the most commonly-used size. P1N blades are 0.040" wide. These thinner blades are good for small work. P1X blades are 5/64" wide. Use these thicker blades for parting off larger diameters where you need additional stiffness.

It is easier to part off large diameters if you cut a groove that is wider than the cut-off blade. First, make a cut about 0.100" deep. Now back out and move over at least 0.010". Cut in again, widening the slot. Continue with this cut until you are 0.100" deeper than the first slot. Repeat this process, moving back and forth, until you are through.

Compatibility

Compatibility

This product works with these LittleMachineShop.com products: