Shear and Brake Combination, 8" 5588 (Discontinued)
- Shear sheet metal, plastics, circuit boards
- Bend sheet metal up to 90 degrees
- Maximum material width 7.75" (197 mm)
- Small defect in the left shear guide
Part Number: 5588 (Discontinued)
Weight: 32.6 lb
Weight: 32.6 lb
Price: $199.95
Share this page:
http://lmscnc.com/5588
http://lmscnc.com/5588
This small shear and brake combination is great for small sheet metal projects.
The reason these machines are on closeout is because they have too large a radius at the bottom of the left shear guide. It makes it a bit hard to square material in the shear. The workaround is to scribe the material where you want to cut it. See the Photos tab.
It cuts metal, plastics, and printed circuit boards.
The bending brake will make bends up to 90 degees. It includes a full length bending die as well as four different length smaller dies.
The base of the machine is 9.4" x 5.4".
| Maximum Material Width | 7.75" (196.8 mm) |
| Maximum Thickness Aluminum | 0.04" (1.0 mm) |
| Maximum Thickness Brass | 0.04" (1.0 mm) |
| Maximum Thickness Circuit Booard | 0.06" (1.5 mm) |
| Maximum Pan Depth | 0.62" (15.9 mm) |
| Minimum Reverse Bend | 0.25" (6.3 mm) |
| Machine Weight | 31.4 lbs (14.3 kg) |
| Base Dimensions (W x D) | 9.4" x 5.4" (240 mm x 137 mm) |
| Mounting Holes Center to Center (W x D) | 7.72" x 4.53" (196.0 mm x 115.0 mm) |
| Overall Dimensions (W x D x H) | 11.2" x 5.0" x 6.6" (286 mm x 127 mm x 168 mm) |
HiTorque Bench Mill
