{"title":"HiTorque","description":"\u003cp\u003eHiTorque represents the machines we wish were sold and we wanted to buy when we started the company. Over the last 25 years, by working closely with the factories we source our machines and parts from we have been able to deliver on this goal\u003c\/p\u003e\n\u003cp\u003eFundamentally better machines with better drive systems including powerful and quiet brushless motors, reliable belt drives that remove the threat of broken gears, re-engineered rigid and accurate columns on mills, and improved electronics, NSK bearings, and other components to improve the functionality and longevity of your machine.\u003c\/p\u003e\n\u003cp\u003eWe also developed new featured and improved existing functionality. More accurate and user-friendly DRO systems, Modern control panels using current technology, and updated handwheels, dials, and levers to create a machine that stand apart from all others.\u003c\/p\u003e\n\u003cp\u003eAs always, we stand behind every HiTorque machine with full warranty and a service team located in the USA.\u003c\/p\u003e","products":[{"product_id":"hitorque-3990-mini-mill","title":"HiTorque 3990 Mini Mill","description":"\u003cp\u003eThe LittleMachineShop.com HiTorque Mini Mill is the best in its class. It has the most power, the most torque, and a larger table than other mills in its class.\u003c\/p\u003e\n\u003cp\u003eThis mill has a solid column. It does not tilt from side to side. This construction is significantly stiffer than the tilting column on other mini mills. This model also includes the air spring head support for even support through the Z-axis range of travel.\u003c\/p\u003e\n\u003cp\u003eThe 500-Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 rpm to 2500 RPM continuously. There are no gears to shift. And, with no gears, the HiTorque Mini Mill machine is the quietest in its class.\u003c\/p\u003e\n\u003cp\u003eThe large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The resettable feed dials allow you to zero them at any point.\u003c\/p\u003e\n\u003cp\u003eThe HiTorque Mini Mill has drill press handles for drilling and fast motion of the mill's head. It also has Z-axis fine feed with 0.001\" resolution for milling operations.\u003c\/p\u003e\n\u003cp\u003eThis machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag; no solvents necessary.\u003c\/p\u003e\n\u003cp\u003eThe LittleMachineShop.com exclusive version of this machine features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e500 Watt output spindle motor\u003c\/li\u003e\n\u003cli\u003eLarge X-Y table\u003c\/li\u003e\n\u003cli\u003eR8 Spindle for wide tool availability\u003c\/li\u003e\n\u003cli\u003eSolid column that does not tilt\u003c\/li\u003e\n\u003cli\u003eNSK brand Japanese bearings\u003c\/li\u003e\n\u003cli\u003eGas strut provides even support through the Z-axis range\u003c\/li\u003e\n\u003cli\u003eDovetail column maintains head alignment at any height\u003c\/li\u003e\n\u003cli\u003eFine feed on Z-axis for precise control\u003c\/li\u003e\n\u003cli\u003eThree radial handles for drilling\u003c\/li\u003e\n\u003cli\u003eE-stop safety power switch\u003c\/li\u003e\n\u003cli\u003eAdjustable Z-axis stop for repetitive drilling\u003c\/li\u003e\n\u003cli\u003eNeoprene bellows protect horizontal ways\u003c\/li\u003e\n\u003cli\u003eAdjustable gibs on all dovetail ways\u003c\/li\u003e\n\u003cli\u003eIncludes R8 to 33JT drill chuck arbor and 1\/2\" drill chuck \u003cbr\u003e\u003cscript\u003e\u003c\/script\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe HiTorque Mini Mill comes with the following:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMini Mill Users Guide written by Chris Wood\u003c\/li\u003e\n\u003cli\u003e2 T-slot nuts with 3\/8\"-16 thread\u003c\/li\u003e\n\u003cli\u003eThree open end wrenches (8\/10 mm, 14\/17 mm, 17\/19 mm)\u003c\/li\u003e\n\u003cli\u003eFour hex (Allen) wrenches (3, 4, 5, and 6 mm)\u003c\/li\u003e\n\u003cli\u003eOne 45-52 mm spanner wrench\u003c\/li\u003e\n\u003cli\u003eSpindle lock pin\u003c\/li\u003e\n\u003cli\u003eOil can (plastic)\u003c\/li\u003e\n\u003cli\u003eOne 1\/2\" drill chuck and R8\/JT33 arbor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eThe LittleMachineShop.com model 3990 HiTorque Mini Mill is a version of the SIEG X2.\u003c\/em\u003e\u003c\/p\u003e","brand":"Sieg Industrial Group","offers":[{"title":"Default Title","offer_id":45473067663541,"sku":"3990","price":1449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/3990.jpg?v=1751483511"},{"product_id":"users-guide-hitorque-mini-lathe-4100-4200","title":"Users Guide, HiTorque Mini Lathe, 4100 \u0026 4200","description":"\u003cp\u003e\u003cem\u003eYou can download for FREE below, but if you would like us to print them out for you and send them to you, we can also do that.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the manual that comes with our 4100 and 4200 mini lathes.\u003c\/p\u003e\n\u003cp\u003eIntroduction\u003cbr\u003eSpecifications\u003cbr\u003eSafety Considerations\u003cbr\u003eFeatures\u003cbr\u003eAccessories\u003cbr\u003eCleaning\u003cbr\u003eAssembly\u003cbr\u003eMounting Your Lathe\u003cbr\u003eOperating Controls\u003cbr\u003eAdjustments\u003cbr\u003eMaintenance\u003cbr\u003eChanging Chuck Jaws\u003cbr\u003eMounting Work in a 3-Jaw Chuck\u003cbr\u003eGrinding Tool Bits\u003cbr\u003eAdjusting Tool Bit Height\u003cbr\u003eTurning\u003cbr\u003eFacing\u003cbr\u003eTurning Angles\u003cbr\u003eThreading\u003cbr\u003eCommon Accessories\u003cbr\u003eParts Diagram\u003cbr\u003eParts List\u003cbr\u003eWiring Diagram\u003c\/p\u003e","brand":"LittleMachineShop.com","offers":[{"title":"Default Title","offer_id":45473164722357,"sku":"4924","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/4924.jpg?v=1751484356"},{"product_id":"users-guide-hitorque-mini-mill-solid-column-with-air-spring-3990","title":"Users Guide, HiTorque Mini Mill, Solid Column with Air Spring, 3990","description":"\u003cp\u003e\u003cem\u003eYou can download for FREE below, but if you would like us to print them out for you and send them to you, we can also do that.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the manual that comes with our 3990 mini mill.\u003c\/p\u003e\n\u003cp\u003eIntroduction\u003cbr\u003eSpecifications\u003cbr\u003eSafety Considerations\u003cbr\u003eFeatures\u003cbr\u003eBasic Accessories\u003cbr\u003eCleaning\u003cbr\u003eAssembly\u003cbr\u003eMounting Your Mill\u003cbr\u003eOperating Controls\u003cbr\u003eMotor Controls\u003cbr\u003eAdjustments\u003cbr\u003eLubrication\u003cbr\u003eMaintenance\u003cbr\u003eChanging Spindle Tools\u003cbr\u003eSquaring a Vise\u003cbr\u003eUsing Parallels\u003cbr\u003eClamping with a Clamping Kit\u003cbr\u003eFinding the Edge of a Workpiece\u003cbr\u003eDrilling\u003cbr\u003eMilling\u003cbr\u003eConventional Milling Versus Climb Milling\u003cbr\u003ePlunge Milling\u003cbr\u003eMilling Slots\u003cbr\u003eSurfacing\u003cbr\u003eCommon Accessories\u003cbr\u003eParts Diagram\u003cbr\u003eParts List\u003cbr\u003eWiring Diagram\u003c\/p\u003e","brand":"LittleMachineShop.com","offers":[{"title":"Default Title","offer_id":45473165344949,"sku":"4927","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/4927.jpg?v=1751484358"},{"product_id":"users-guide-hitorque-bench-lathe-3536-3540","title":"Users Guide, HiTorque Bench Lathe, 3536 \u0026 3540","description":"\u003cp\u003e\u003cem\u003eYou can download for FREE below, but if you would like us to print them out for you and send them to you, we can also do that.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the HiTorque bench lathe manual that comes with our 3536 and 3540 bench lathes.\u003c\/p\u003e\n\u003cp\u003eIntroduction\u003cbr\u003eSpecifications\u003cbr\u003eSafety Considerations\u003cbr\u003eFeatures\u003cbr\u003eAccessories\u003cbr\u003eCleaning\u003cbr\u003eMounting Your Lathe\u003cbr\u003eLathe Controls\u003cbr\u003eAdjustments\u003cbr\u003eMaintenance\u003cbr\u003eChuck\u003cbr\u003eTool Bits\u003cbr\u003eTurning\u003cbr\u003eFacing\u003cbr\u003eTurning Angles\u003cbr\u003eThreading\u003cbr\u003eCommon Accessories\u003cbr\u003eParts Diagram\u003cbr\u003eParts List\u003cbr\u003eWiring Diagram\u003c\/p\u003e","brand":"LittleMachineShop.com","offers":[{"title":"Default Title","offer_id":45473165410485,"sku":"4928","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/4928.jpg?v=1751484359"},{"product_id":"users-guide-hitorque-micro-mill-2mt-4700","title":"Users Guide, HiTorque Micro Mill, 2MT, 4700","description":"\u003cp\u003e\u003cem\u003eYou can download for FREE below, but if you would like us to print them out for you and send them to you, we can also do that.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMini Mill Users Guide\u003c\/strong\u003e\u003cbr\u003eBy Chris Wood\u003cbr\u003e31 pages\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis booklet covers the following topics: Specifications, Safety Considerations, Features, Basic Accessories, Cleaning, Mounting Your Mill, Operating Controls, Adjustments, Lubrication, Changing Spindle Tools, Squaring a Vise, Using Parallels, Clamping with a Clamping Kit, Finding the Edge of a Workpiece, Drilling, Milling, Conventional Milling Versus Climb Milling, Plunge Milling, Milling Slots, Surfacing, Common Accessories, and Maintenance.\u003c\/p\u003e","brand":"LittleMachineShop.com","offers":[{"title":"Default Title","offer_id":45473166000309,"sku":"4930","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/4930.jpg?v=1751484361"},{"product_id":"hitorque-5100-mini-lathe-7x16","title":"HiTorque 5100 Mini Lathe - 7x16","description":"\u003cp\u003eThe LittleMachineShop.com HiTorque 7x16 Mini Lathe is the best in its class. It has the most power, most torque, and a longer center distance than other lathes in its class.\u003c\/p\u003e\n\u003cp\u003eThe 500-Watt brushless DC spindle drive motor provides tremendous low-end torque. You can vary the speed from 50 rpm to 2500 rpm continuously in both directions. There are no gears to shift. NSK Bearings ensure years of accurate and reliable life.\u003c\/p\u003e\n\u003cp\u003eThe cross feed and compound rest dials are graduated in 0.001\" and 0.025 mm. A 4\" 3-jaw lathe chuck is included, and the lathe is equipped with a 4-way indexing tool post set for 5\/16\" (8 mm) tools.\u003c\/p\u003e\n\u003cp\u003eReal top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.35 to 8 mm pitch with the extra 21 tooth change gear that is included. Cutting inch threads is made even easier with the factory-installed threading dial.\u003c\/p\u003e\n\u003cp\u003eThis machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag--no solvents necessary.\u003c\/p\u003e\n\u003cp\u003eThe LittleMachineShop.com exclusive version of this machine features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull 16\" bed length with a cam-lock tailstock for longer work pieces.\u003c\/li\u003e\n\u003cli\u003e500-Watt brushless DC spindle motor for low speed torque\u003c\/li\u003e\n\u003cli\u003eNSK brand Japanese bearings\u003c\/li\u003e\n\u003cli\u003eDigital spindle speed output (with optional display)\u003c\/li\u003e\n\u003cli\u003eReal top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability.\u003c\/li\u003e\n\u003cli\u003eThreading dial\u003c\/li\u003e\n\u003cli\u003eThe cross feed and compound rest dials are graduated in 0.001\" and 0.025 mm.\u003c\/li\u003e\n\u003cli\u003eThe lathe is equipped with a 4-way indexing tool post set for 5\/16\" (8 mm) tools.\u003c\/li\u003e\n\u003cli\u003eChip tray and backsplash.\u003c\/li\u003e\n\u003cli\u003eUser’s Manual\u003c\/li\u003e\n\u003cli\u003eMade and inspected in an ISO 9001 compliant factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe LittleMachineShop.com exclusive version of this machine includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4\" (100 mm) 3-jaw self-centering lathe chuck with two sets of jaws and a chuck wrench\u003c\/li\u003e\n\u003cli\u003eA #2 Morse Taper (2MT) dead center\u003c\/li\u003e\n\u003cli\u003e11-piece Change gear set\u003c\/li\u003e\n\u003cli\u003eTwo open end wrenches\u003c\/li\u003e\n\u003cli\u003eFour hex (Allen) wrenches\u003c\/li\u003e\n\u003cli\u003eA plastic oil can \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe LittleMachineShop.com model 5100 HiTorque Mini Lathe is a version of the SIEG SC2.\u003c\/p\u003e","brand":"Sieg Industrial Group","offers":[{"title":"Default Title","offer_id":45473188872373,"sku":"5100","price":1399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/5100.jpg?v=1783457090"},{"product_id":"hitorque-6450-deluxe-led-mini-mill","title":"HiTorque 6450 Deluxe LED Mini Mill","description":"\u003cp\u003eThe LittleMachineShop.com HiTorque 6450 Mini Mill is the best in its class. It has the most power, the most torque, the most features and upgrades, and the largest table in its class. It is also proof that all mills are not the same.\u003c\/p\u003e\n\u003cp\u003eMost noticeable is the LED mirror display which clearly and elegantly organizes the key controls for the mill. The panel features a start\/stop button, spindle direction button, a Z-axis fine feed knob, and a variable speed knob. The fine feed has a resolution of 0.001\" for precise milling operations. The spindle speed is displayed in a large easy-to-read digital display.\u003c\/p\u003e\n\u003cp\u003eThe 6450 mill also comes equipped with a 3-axis tablet display DRO connected via Bluetooth to magnetic scales on the table and column. The DRO system provides measures for the X, Y, and Z-axis in increments .0002\" and comes factory installed on the mill.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA 500-Watt brushless spindle drive motor and belt drive provides tremendous power and low-end torque. There are NO gears in the spindle drive. The drive allows for spindle speeds from 100 to 2500 RPM continuously in both directions. NSK quality spindle bearings ensure smooth and quiet operation. An electrically interlocked spindle lock ensures easy and safe operation.\u003c\/p\u003e\n\u003cp\u003eThis mill has a solid dovetail column (it does not tilt side to side). This construction is significantly stiffer than the tilting column on other mini mills. This model also includes an air spring head support for even movement through the Z-axis range of travel.\u003c\/p\u003e\n\u003cp\u003eThe models 6450 mini mills come equipped with an electrically interlocked spindle lock. This mechanism makes tool changes easier, faster and safer. When engaged, the plunger automatically drops into the locking hole as the spindle is rotated. An electromagnetic interlock disables power to the motor, locking the spindle.\u003c\/p\u003e\n\u003cp\u003eThe HiTorque Mini Mill has drill press handles for drilling and fast motion of the mill's head. The R8 spindle ensures wide tool availability.\u003c\/p\u003e\n\u003cp\u003eThe large mill table has attractive aluminum hand wheels and provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The resettable feed dials allow you to zero them at any point. A latch handled cabinet provides easy access to control boards.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe LittleMachineShop.com exclusive version of this machine features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLED display with illuminated controls and integrated spindle speed readout\u003c\/li\u003e\n\u003cli\u003eFactory installed 3-Axis DRO with 7\" Android tablet readout\u003c\/li\u003e\n\u003cli\u003e500-Watt output spindle motor\u003c\/li\u003e\n\u003cli\u003eElectrically interlocked spindle lock\u003c\/li\u003e\n\u003cli\u003eLarge X-Y table with attractive anodized handwheels\u003c\/li\u003e\n\u003cli\u003eR8 Spindle for wide tool availability\u003c\/li\u003e\n\u003cli\u003eSolid column that does not tilt\u003c\/li\u003e\n\u003cli\u003eNSK brand Japanese bearings\u003c\/li\u003e\n\u003cli\u003eNo gears in spindle drive\u003c\/li\u003e\n\u003cli\u003eGas strut provides even support through the Z-axis range\u003c\/li\u003e\n\u003cli\u003eDovetail column maintains head alignment at any height\u003c\/li\u003e\n\u003cli\u003eFine feed on Z-axis for precise control\u003c\/li\u003e\n\u003cli\u003eThree radial handles for drilling\u003c\/li\u003e\n\u003cli\u003eE-stop safety power switch\u003c\/li\u003e\n\u003cli\u003eAdjustable Z-axis stop for repetitive drilling\u003c\/li\u003e\n\u003cli\u003eNeoprene bellows protect horizontal ways\u003c\/li\u003e\n\u003cli\u003eAdjustable gibs on all dovetail ways\u003c\/li\u003e\n\u003cli\u003eIncludes R8 to 33JT drill chuck arbor and 1\/2\" drill chuck\u003c\/li\u003e\n\u003cli\u003eMini Mill Users Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe HiTorque Mini Mill comes with the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e7\" Android tablet for DRO display\u003c\/li\u003e\n\u003cli\u003e2 T-slot nuts with 3\/8\"-16 thread\u003c\/li\u003e\n\u003cli\u003eThree open end wrenches (8\/10 mm, 14\/17 mm, 17\/19 mm)\u003c\/li\u003e\n\u003cli\u003eFour hex (Allen) wrenches (3, 4, 5, and 6 mm)\u003c\/li\u003e\n\u003cli\u003eOne 45-52 mm spanner wrench\u003c\/li\u003e\n\u003cli\u003eSpindle lock pin\u003c\/li\u003e\n\u003cli\u003eT-type socket wrench for drawbar\u003c\/li\u003e\n\u003cli\u003eOil can (plastic)\u003c\/li\u003e\n\u003cli\u003eOne 1\/2\" drill chuck and R8\/JT33 arbor\u003c\/li\u003e\n\u003cli\u003eTool box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eThe LittleMachineShop.com model 3990 HiTorque Mini Mill is a version of the SIEG X2.\u003c\/em\u003e\u003c\/p\u003e","brand":"Sieg Industrial Group","offers":[{"title":"Default Title","offer_id":45473329414325,"sku":"6450","price":2499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/6450.jpg?v=1751486528"},{"product_id":"hitorque-6500-bench-mill-long-table","title":"HiTorque 6500 Bench Mill (Long Table)","description":"\u003cp\u003eThe LittleMachineShop.com HITorque Bench Mill 6500 provides a larger table, more travel, more horsepower, and more rigidity than other brand mills in its size class.\u003c\/p\u003e\n\u003cp\u003eThe 6500 is a middleweight in our mill lineup. A significant step up in size, rigidity, and power compared to a mini mill. Weighing in at a little over 250 lbs., these mills can be placed on a bench with the help of some friends and their base dimensions of 9.1\" x 16.1\" will fit on most benches.\u003c\/p\u003e\n\u003cp\u003eA 750-Watt (1 hp) brushless DC motor provides abundant spindle power and tremendous low-end torque. The drive allows for spindle speeds from 100 to 2500 RPM continuously in both forward and reverse. A belt drive from motor to spindle eliminates any failure from gears breaking. NSK quality spindle bearings ensure years of quiet operation.\u003c\/p\u003e\n\u003cp\u003eThe combination of a large table (27.5\" x 6.25\") and extensive travel along X, Y, Z-axis (19.7\", 5.7\", 11.6\") provides a large work envelope. Precision ground ways ensure smooth and accurate movement. Adjustable gibs are on all dovetail ways. A fine feed knob on the Z-axis provides for precise control.\u003c\/p\u003e\n\u003cp\u003eThe mill has an R8 spindle for wide tool availability. A true quill and drill press-style handles make for easy drilling. Tapping-mode is another standard feature with a button on the end of each handle allowing you to reverse the spindle to make tapping easy.\u003c\/p\u003e\n\u003cp\u003eThe mill has a solid (No-Tilt) head and rigid rectangular dovetail column which maintains head alignment (tram) at any height, ensuring years of rigid and \"true\" milling.\u003c\/p\u003e\n\u003cp\u003eA digital spindle speed display and a separate digital depth gauge for the quill which reads in inches and mm. You can automatically resume running at the last-used spindle speed. Spindle fine feed and position lock are also standard.\u003c\/p\u003e\n\u003cp\u003eLarge handwheels on the X and Y axes and 10 TPI lead screws (accurate to 0.001\") provide accurate readings. Ball thrust bearings on feed screws ensure smooth movement.\u003c\/p\u003e\n\u003cp\u003eAt LittleMachineShop.com, we stand behind every machine we sell! If it’s not right, we’ll make it right and we have the in-house technicians and replacement parts in our U.S. warehouse to back it up.\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0in; line-height: normal; tab-stops: list .5in;\" class=\"MsoNormal\"\u003eThe LittleMachineShop.com exclusive version of this machine features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e750 Watt (1 hp) brushless DC spindle drive (No gears to break)\u003c\/li\u003e\n\u003cli\u003eNSK brand Japanese bearings\u003c\/li\u003e\n\u003cli\u003eLarge X-Y table 27.5\" x 6.25\"\u003c\/li\u003e\n\u003cli\u003eSolid rectangular column for rigidity\u003c\/li\u003e\n\u003cli\u003eDovetail column maintains head alignment at any height\u003c\/li\u003e\n\u003cli\u003eAdjustable gibs on all dovetail ways\u003c\/li\u003e\n\u003cli\u003eR8 Spindle for wide tool availability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTapping mode for reversing taps out\u003c\/li\u003e\n\u003cli\u003eForward and Reverse modes on the power panel\u003c\/li\u003e\n\u003cli\u003e0.001\" Graduated dials, 0.100\" per turn\u003c\/li\u003e\n\u003cli\u003eDigital position readout on the quill reads in inches and mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpindle speed display\u003c\/li\u003e\n\u003cli\u003eSpindle fine feed and position lock\u003c\/li\u003e\n\u003cli\u003eFine feed on Z-axis for precise control\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncludes R8 to 33JT drill chuck arbor and drill chuck\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe HiTorque Bench Mill comes with the following:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBench Mill Users Guide\u003c\/li\u003e\n\u003cli\u003eOne 1\/2\" drill chuck and R8 arbor\u003c\/li\u003e\n\u003cli\u003eTwo T-slot nuts\u003c\/li\u003e\n\u003cli\u003eThree end wrenches\u003c\/li\u003e\n\u003cli\u003eFive hex (Allen) wrenches\u003c\/li\u003e\n\u003cli\u003eOne spanner wrench\u003c\/li\u003e\n\u003cli\u003eOil can (plastic)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*This mill is a version of the SIEG SX2.7 built to LittleMachineShop.com specifications.\u003c\/p\u003e","brand":"Sieg Industrial Group","offers":[{"title":"Default Title","offer_id":45473334886581,"sku":"6500","price":2399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/6500.jpg?v=1751486642"},{"product_id":"hitorque-6570-deluxe-bench-mill","title":"HiTorque 6570 Deluxe Bench Mill","description":"\u003cp\u003eThe model 6570 bench top mill provides a larger table, more travel, more horsepower, and more rigidity than other brand mills in its size class. It is the deluxe middleweight in our mill lineup. A significant step up in size, and power compared to a mini mill. Weighing in at just over 250 lbs. and a base dimension of 9.1\" x 16.1\", this mill can be placed on a bench with the help of some friends.\u003c\/p\u003e\n\u003cp\u003eMost noticeable is the LED mirror display which clearly and elegantly organizes the key controls for the mill. The panel features a start\/stop button, spindle direction button, Tapping mode button, a variable speed knob, and a Z-axis fine feed knob. The fine feed has a resolution of 0.001\" for precise milling operations. The spindle speed is displayed in a large easy-to-read digital display.\u003c\/p\u003e\n\u003cp\u003eA 750-Watt (1 hp) brushless DC motor provides abundant spindle power and tremendous low-end torque. The drive allows for spindle speeds from 100 to 2000 RPM continuously in both forward and reverse. A belt drive from motor to spindle eliminates any failure from gears breaking. High quality NSK brand tapered roller spindle bearings ensure years of quiet operation.\u003c\/p\u003e\n\u003cp\u003eThe combination of a large table (27.6\" x 6.3\") and extensive travel along X, Y, Z-axis (19.7\", 5.5\", 11.6\") provides a large work envelope. Precision ground ways ensure smooth and accurate movement. Adjustable tapered gibs are on all dovetail ways.\u003c\/p\u003e\n\u003cp\u003eThe mill has an R8 spindle for wide tool availability. An Electrically interlocked spindle lock for easy, safe tool changes is added to this machine.\u003c\/p\u003e\n\u003cp\u003eA true quill and drill press-style handles make for easy drilling. A separate digital depth gauge for the quill which reads in inches and mm and fine feed knob and position lock on the Z-axis provides for precise milling control. Tapping-mode allows you to reverse the spindle with a push of a button on the z-axis handles, making tapping easy.\u003c\/p\u003e\n\u003cp\u003eThe mill has a solid (No-Tilt) head and rigid rectangular dovetail column which maintains head alignment (tram) at any height, ensuring years of rigid and \"true\" milling.\u003c\/p\u003e\n\u003cp\u003eLarge handwheels on the X and Y axes and 10 TPI lead screws (accurate to 0.001\") provide accurate readings. Ball thrust bearings on feed screws ensure smooth movement. On the deluxe version of this machine, Machined aluminum handwheels finish the professional look.\u003c\/p\u003e\n\u003cp\u003eA factory installed, hard wired 3-axis DRO with easy-to-read display. Magnetic scales are mounted on the table and column. The DRO system provides accurate measurement for the X, Y, and Z axis in increments 0.0002\".\u003c\/p\u003e\n\u003cp\u003eAt LittleMachineShop.com, we stand behind every machine we sell! If it’s not right, we’ll make it right and we have the in-house technicians and replacement parts in our U.S. warehouse to back it up.\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0in; line-height: normal; tab-stops: list .5in;\" class=\"MsoNormal\"\u003eThe LittleMachineShop.com exclusive version of this machine features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLED mirror display with digital spindle speed\u003c\/li\u003e\n\u003cli\u003eFactory-installed 3-axis digital position readout (DRO) with hard-wired tablet display\u003c\/li\u003e\n\u003cli\u003eElectrically interlocked spindle lock\u003c\/li\u003e\n\u003cli\u003eMounted machine light to highlight work area\u003c\/li\u003e\n\u003cli\u003e750 Watt (1 hp) brushless DC spindle drive\u003c\/li\u003e\n\u003cli\u003eR8 Spindle for wide tool availability\u003c\/li\u003e\n\u003cli\u003eNSK brand Japanese bearings\u003c\/li\u003e\n\u003cli\u003eNo gears in spindle drive\u003c\/li\u003e\n\u003cli\u003e0.001\" Graduated dials, 0.100\" per turn\u003c\/li\u003e\n\u003cli\u003eDigital position readout on the quill reads in inches and mm\u003c\/li\u003e\n\u003cli\u003eLarge X-Y table with machined aluminum handwheels\u003c\/li\u003e\n\u003cli\u003eTapping mode for reversing taps out\u003c\/li\u003e\n\u003cli\u003eSolid rectangular column for rigidity\u003c\/li\u003e\n\u003cli\u003eDovetail column maintains head alignment at any height\u003c\/li\u003e\n\u003cli\u003eE-stop safety power switch\u003c\/li\u003e\n\u003cli\u003eForward and Reverse modes on the power panel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpindle fine feed and position lock\u003c\/li\u003e\n\u003cli\u003eFine feed on Z-axis for precise control\u003c\/li\u003e\n\u003cli\u003eAdjustable gibs on all dovetail ways\u003c\/li\u003e\n\u003cli\u003eIncludes R8 to 33JT drill chuck arbor and 1\/2\" drill chuck\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe HiTorque Bench Mill comes with the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUser's Manual\u003c\/li\u003e\n\u003cli\u003e2 T-slot nuts with 3\/8\"-16 thread\u003c\/li\u003e\n\u003cli\u003eR8\/JT33 Drill chuck arbor\u003c\/li\u003e\n\u003cli\u003e16 mm (5\/8\") Drill chuck 0.20 mm max runout\u003c\/li\u003e\n\u003cli\u003eDrill chuck key\u003c\/li\u003e\n\u003cli\u003eL-hex wrench for drawbar\u003c\/li\u003e\n\u003cli\u003e8\/10 mm open end wrench, 14\/17 mm open end wrench, 17\/19 mm open end wrench\u003c\/li\u003e\n\u003cli\u003e3, 4-, 5-, 6-, and 8-mm hex wrenches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*This mill is a version of the SIEG SX2.7 built to LittleMachineShop.com specifications.\u003c\/em\u003e\u003c\/p\u003e","brand":"Sieg Industrial Group","offers":[{"title":"Default Title","offer_id":45473341604021,"sku":"6570","price":3499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/6570.jpg?v=1751486821"},{"product_id":"hitorque-6770-deluxe-large-bench-mill","title":"HiTorque 6770 Deluxe Large Bench Mill","description":"\u003cp\u003eThe LittleMachineShop.com HiTorque Large Bench Mill 6770 is our largest mill. It is a significant step up in size, rigidity, and power compared to a mini mill, or even our other bench mills. This bench top mill provides a larger table, more travel, more horsepower, and more rigidity. Compare our standard features and specs to others in this size and price range.\u003c\/p\u003e\n\u003cp\u003eA 1000 Watt (1-1\/3 hp) brushless DC motor provides abundant spindle power and tremendous low-end torque. NSK brand Japanese-quality spindle bearings ensure years of quiet operation. A belt drive from motor to spindle eliminates any failure from gears breaking. A simple belt change switches between low range and high range, giving you continuously variable spindle speeds from 80-5000 rpm.\u003c\/p\u003e\n\u003cp\u003eA NEW easy-to-read LED display with built in spindle speed readout allows you clear and easy access to all major controls\u003cbr\u003e• Dial in the spindle speed with the variable speed dial\u003cbr\u003e• Engage tapping mode for easier tapping operations\u003cbr\u003e• Stop and then restart the lathe at a pre-selected speed.\u003c\/p\u003e\n\u003cp\u003eA factory installed, hard wired 3-axis DRO with easy to read display. Magnetic scales are mounted on the table and column. The DRO system provides accurate measurement for the X, Y, and Z axis in increments 0.0002\".\u003c\/p\u003e\n\u003cp\u003eThe combination of a large table (29.1\" x 7.1\") and extensive travel along all axis (XYZ: 20.2\", 8.5\", 11.8\") provides a large work envelope. Precision ground ways ensure smooth and accurate movement. Adjustable gibs are on all dovetail ways. Fine feed on Z-axis for precise control.\u003c\/p\u003e\n\u003cp\u003eThe mill has a solid (No-Tilt) head and rigid rectangular dovetail column which maintains head alignment (tram) at any height, ensuring years of rigid and \"true\" milling. Power head lift to raise or lower the mill head with the touch of a button. A handy magnetic \"toolbox\" on the side of the column provides a convenient place for the spindle wrench and drawbar wrench.\u003c\/p\u003e\n\u003cp\u003eThe mill has an R8 spindle for wide tool availability. A true quill and drill press-style handles make for easy drilling. Tapping-mode is another standard feature with a button on the end of each handle allowing you to reverse the spindle to make tapping easy. Electrically interlocked spindle lock for easy, safe tool changes\u003c\/p\u003e\n\u003cp\u003eStandard features include a digital spindle speed display and a separate DRO for the quill which reads in inches and mm. You can automatically resume running at the last-used spindle speed. Spindle fine feed and position lock are also standard.\u003c\/p\u003e\n\u003cp\u003eLarge anodized handwheels on the X and Y axes and 10 TPI lead screws (Accurate to .001″) provide better accuracy readings than metric conversions. Ball thrust bearings on feed screws and split nuts on X and Y axes minimize backlash and ensure much smoother movements and less backlash.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal; tab-stops: list .5in;\"\u003eThe LittleMachineShop.com exclusive version of this machine features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFactory-installed 3-axis digital position readout (DRO) with hard-wired tablet display\u003c\/li\u003e\n\u003cli\u003ePower head lift raises or lowers the mill head with the touch of a button\u003c\/li\u003e\n\u003cli\u003eElectrically interlocked spindle lock for easy, safe tool changes\u003c\/li\u003e\n\u003cli\u003eMounted machine light to highlight work area\u003c\/li\u003e\n\u003cli\u003e1000 Watt (1-1\/3 hp) brushless DC spindle drive\u003c\/li\u003e\n\u003cli\u003eR8 Spindle for wide tool availability\u003c\/li\u003e\n\u003cli\u003eNSK brand Japanese bearings\u003c\/li\u003e\n\u003cli\u003e0.001\" graduated dials, 0.100\" per turn\u003c\/li\u003e\n\u003cli\u003eFactory installed 3-axis DRO display and Magnetic scales \u003c\/li\u003e\n\u003cli\u003eDigital position readout on the quill reads in inches and mm\u003c\/li\u003e\n\u003cli\u003eResume running at last-used spindle speed\u003c\/li\u003e\n\u003cli\u003eTapping mode for backing taps out and for running in reverse direction\u003c\/li\u003e\n\u003cli\u003eSolid rectangular column for rigidity\u003c\/li\u003e\n\u003cli\u003eDovetail column maintains head alignment at any height\u003c\/li\u003e\n\u003cli\u003eLarge 29.1\" x 7.1\" (740 mm x 180 mm) X-Y table with anodized handwheels\u003c\/li\u003e\n\u003cli\u003eE-stop safety power switch\u003c\/li\u003e\n\u003cli\u003eSpindle speed display on control panel\u003c\/li\u003e\n\u003cli\u003eSpindle fine feed and position lock\u003c\/li\u003e\n\u003cli\u003eFine feed on Z-axis for precise control\u003c\/li\u003e\n\u003cli\u003eAdjustable gibs on all dovetail ways\u003c\/li\u003e\n\u003cli\u003eIncludes R8 to JT6 drill chuck arbor and 5\/8\" Keyless drill chuck\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMagnetic \"tool zone\" on column for storing drawbar wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe HiTorque Bench Mill comes with the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUser's Manual (artwork provided by LMS)\u003c\/li\u003e\n\u003cli\u003eT-slot nuts with 3\/8\"-16 thread\u003c\/li\u003e\n\u003cli\u003eR8\/JT33 Drill Chuck Arbor\u003c\/li\u003e\n\u003cli\u003e16 mm (5\/8\") Keyless Drill Chuck\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eL-hex wrench for drawbar\u003c\/li\u003e\n\u003cli\u003eOpen end wrenches 8\/10 mm, 14\/17 mm, and 17\/19 mm\u003c\/li\u003e\n\u003cli\u003eHex wrenches 3, 4, 5, 6, and 8 mm\u003c\/li\u003e\n\u003cli\u003ePoly-V timing belt for high speed range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*This mill is a version of the SIEG SX3.5 built to LittleMachineShop.com specifications.\u003c\/em\u003e\u003c\/p\u003e","brand":"Sieg Industrial Group","offers":[{"title":"Default Title","offer_id":45473363820725,"sku":"6770","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/6770-13.jpg?v=1760134914"},{"product_id":"hitorque-7350-deluxe-mini-lathe-7x16","title":"HiTorque 7350 Deluxe Mini Lathe - 7x16","description":"\u003cp\u003eThe LittleMachineShop.com HiTorque 7x16 Mini Lathe is the best in its class. It has the most power, most torque, and a longer center distance than other lathes in its class.\u003c\/p\u003e\n\u003cp\u003eThis DELUXE Lathe has the following upgraded features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis lathe comes equipped with digital readouts on the cross slide, compound rest, and tailstock quill.\u003c\/li\u003e\n\u003cli\u003eAttractive hand wheels are all metal, and the levers are chrome.\u003c\/li\u003e\n\u003cli\u003eThe all steel, 0XA wedge-type quick change tool posts accepts turning tools up to 1\/2\" shank. It comes with five toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 500-Watt brushless DC spindle drive motor provides tremendous low-end torque. You can vary the speed from 50 rpm to 2500 rpm continuously in both directions. There are no gears to shift. NSK Bearings ensure years of accurate and reliable life.\u003c\/p\u003e\n\u003cp\u003eThe cross feed and compound rest dials are graduated in 0.001\" and 0.025 mm. A 4\" 3-jaw lathe chuck is included, and the lathe is equipped with a 4-way indexing tool post set for 5\/16\" (8 mm) tools.\u003c\/p\u003e\n\u003cp\u003eReal top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.35 to 8 mm pitch with the extra 21 tooth change gear that is included. Cutting inch threads is made even easier with the factory-installed threading dial.\u003c\/p\u003e\n\u003cp\u003eThis machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag--no solvents necessary.\u003c\/p\u003e\n\u003cp\u003eThe LittleMachineShop.com exclusive version of this machine features:\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eDigital readouts on the compound rest, cross slide, and tailstock quill\u003c\/li\u003e\n\u003cli\u003e0XA wedge-type Quick change tool post set with five tool holders\u003c\/li\u003e\n\u003cli\u003eFull 16\" bed length with a cam-lock tailstock for longer work pieces.\u003c\/li\u003e\n\u003cli\u003e500-Watt brushless DC spindle motor for low speed torque\u003c\/li\u003e\n\u003cli\u003eNSK brand Japanese bearings\u003c\/li\u003e\n\u003cli\u003eDigital spindle speed output (with optional display)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReal top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability.\u003c\/li\u003e\n\u003cli\u003eThreading dial\u003c\/li\u003e\n\u003cli\u003eThe cross feed and compound rest dials are graduated in 0.001\" and 0.025 mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChip tray and backsplash.\u003c\/li\u003e\n\u003cli\u003eUser’s Manual\u003c\/li\u003e\n\u003cli\u003eMade and inspected in an ISO 9001 compliant factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe LittleMachineShop.com exclusive version of this machine includes:\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003e4\" (100 mm) 3-jaw self-centering lathe chuck with two sets of jaws and a chuck wrench\u003c\/li\u003e\n\u003cli\u003eA #2 Morse Taper (2MT) dead center\u003c\/li\u003e\n\u003cli\u003e11-piece Change gear set\u003c\/li\u003e\n\u003cli\u003eTwo open end wrenches\u003c\/li\u003e\n\u003cli\u003eFour hex (Allen) wrenches\u003c\/li\u003e\n\u003cli\u003eA plastic oil can \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe LittleMachineShop.com model 7350 HiTorque Mini Lathe is a version of the SIEG SC2.\u003c\/p\u003e","brand":"Sieg Industrial Group","offers":[{"title":"Default Title","offer_id":45473365524661,"sku":"7350","price":1899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/7350.jpg?v=1782506965"},{"product_id":"hitorque-7450-deluxe-mini-lathe-7x16-led-display","title":"HiTorque 7450 Deluxe Mini Lathe - 7x16, LED Display","description":"\u003cp\u003eThe LittleMachineShop.com HiTorque 7450 Mini Lathe is the best in its class. It has the most power, the most torque, the most features and upgrades, and the longest bed in its class. It is also proof that all lathes are not the same.\u003c\/p\u003e\n\u003cp\u003eMost noticeable is the LED mirror display which clearly and elegantly organizes the key controls for the lathe. All controls are Illuminated, and it includes a start\/stop button, a spindle direction button and emergency power (E-stop) switch. A variable speed control knob allows accurate control of spindle speeds, while an integrated spindle speed display clearly displays the speed.\u003c\/p\u003e\n\u003cp\u003eThe 7450 lathe also comes equipped with a 2-axis tablet display DRO connected via Bluetooth to magnetic scales on the longitudinal and cross feeds. It also has 2 digital readouts on the compound rest and tailstock. The DRO system measures in increments 0.0002\" and comes factory installed on the lathe. The cross feed and compound rest dials are graduated in 0.001\" and 0.025 mm.\u003c\/p\u003e\n\u003cp\u003eA 500-Watt brushless DC spindle drive motor and belt drive provides tremendous power and low-end torque. There are NO gears to shift, so no gears to break. The drive allows for spindle speeds from 100 to 2500 RPM continuously in both directions. NSK brand Japanese-quality spindle bearings ensure smooth and quiet operation.\u003c\/p\u003e\n\u003cp\u003eStandard on the lathe is an all steel, wedge-type quick change tool post which accepts turning tools up to 1\/2\" shank. Five toolholders are also included for the most common tools and tasks. The lathe also comes with a 4\" Sanou lathe chuck, a Morse taper #2 dead center for the tailstock, and an 11-gear change gear set.\u003c\/p\u003e\n\u003cp\u003eReal top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.35 to 8 mm pitch with the extra 21 tooth change gear that is included. Cutting inch threads is made even easier with the factory-installed threading dial.\u003c\/p\u003e\n\u003cp\u003eThis machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag--no solvents necessary.\u003c\/p\u003e\n\u003cp\u003eThe LittleMachineShop.com exclusive version of this machine features:\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eLED display with illuminated controls and integrated spindle speed readout\u003c\/li\u003e\n\u003cli\u003eFactory installed 2-axis DRO with 7\" Android tablet readout on carriage and cross feed\u003c\/li\u003e\n\u003cli\u003eDigital readouts on the compound rest, and tailstock quill\u003c\/li\u003e\n\u003cli\u003e0XA wedge-type Quick change tool post set with five tool holders\u003c\/li\u003e\n\u003cli\u003eAluminum hand wheels and Chrome levers\u003c\/li\u003e\n\u003cli\u003eFull 16\" bed length with a cam-lock tailstock for longer work pieces.\u003c\/li\u003e\n\u003cli\u003e500-Watt brushless DC spindle motor for low speed torque\u003c\/li\u003e\n\u003cli\u003eNSK brand Japanese bearings\u003c\/li\u003e\n\u003cli\u003eDigital spindle speed readout\u003c\/li\u003e\n\u003cli\u003eReal top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability.\u003c\/li\u003e\n\u003cli\u003eThreading dial\u003c\/li\u003e\n\u003cli\u003eThe cross feed and compound rest dials are graduated in 0.001\" and 0.025 mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDeluxe Heavy Duty Chip tray and backsplash.\u003c\/li\u003e\n\u003cli\u003eUser’s Manual\u003c\/li\u003e\n\u003cli\u003eMade and inspected in an ISO 9001 compliant factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe LittleMachineShop.com exclusive version of this machine includes:\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003e4\" (100 mm) 3-jaw self-centering lathe chuck with two sets of jaws and a chuck wrench\u003c\/li\u003e\n\u003cli\u003eA #2 Morse Taper (2MT) dead center\u003c\/li\u003e\n\u003cli\u003e11-gear change gear set that includes a 21-tooth gear for accurate metric threading\u003c\/li\u003e\n\u003cli\u003eTwo open end wrenches\u003c\/li\u003e\n\u003cli\u003eFour hex (Allen) wrenches\u003c\/li\u003e\n\u003cli\u003eA plastic oil can \u003c\/li\u003e\n\u003cli\u003eConvenient toolbox to hold accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe LittleMachineShop.com model 7450 HiTorque Mini Lathe is a version of the SIEG SC2.\u003c\/p\u003e","brand":"Sieg Industrial Group","offers":[{"title":"Default Title","offer_id":45473365786805,"sku":"7450","price":2599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/7450.jpg?v=1769801240"},{"product_id":"hitorque-9x20-bench-lathe-led-display","title":"HiTorque 9x20 Bench Lathe, LED Display","description":"\u003cp\u003eThe LittleMachineShop.com model 7600 HiTorque9x20 Bench Lathe is the best in its class. It is a significant step up in size, rigidity, and power compared to a mini lathe. This bench top lathe provides a larger bed, more swing over bed, more horsepower, and more rigidity. Compare our standard features and specs to others in this size and price range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNEW\u003c\/strong\u003e larger spindle through hole - 1.1\" (28 mm) accepts 1\" stock.\u003cbr\u003e\u003cstrong\u003eNEW\u003c\/strong\u003e greater swing from 8.5\" to 9\"\u003c\/p\u003e\n\u003cp\u003eThe 1000-Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 rpm to 2000 rpm continuously in both directions. There are no gears to shift. NSK brand Japanese-quality spindle bearings ensure years of quiet operation.\u003c\/p\u003e\n\u003cp\u003eNEW easy-to-read LED display with built in speed readout allows you to stop and then restart the lathe at a pre-selected speed.\u003c\/p\u003e\n\u003cp\u003eA power cross feed is a feature not found in other lathes of this size. The cross feed and compound rest dials are graduated in 0.001\" and advance 0.050\" per turn. The metal lathe is equipped with a 4-way indexing tool post set for 10 mm tools.\u003c\/p\u003e\n\u003cp\u003eA reversible 2 mm pitch lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 6 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.25 to 4 mm pitch with the change gears that are included. All the gears on this lathe are metal.\u003c\/p\u003e\n\u003cp\u003eFeatures for the model 7600 lathe:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNEW larger spindle through hole - 1.1\" (28 mm) accepts 1\" stock.\u003c\/li\u003e\n\u003cli\u003eNEW greater swing from 8.5\" to 9\"\u003c\/li\u003e\n\u003cli\u003eNEW easy-to-read LED display with built in speed readout\u003c\/li\u003e\n\u003cli\u003e1000 Watt output spindle motor with spindle speed display\u003c\/li\u003e\n\u003cli\u003eGenuine NSK bearings\u003c\/li\u003e\n\u003cli\u003eMetal gears\u003c\/li\u003e\n\u003cli\u003eInduction hardened ways\u003c\/li\u003e\n\u003cli\u003ePower longitudinal feed\u003c\/li\u003e\n\u003cli\u003ePower cross feed\u003c\/li\u003e\n\u003cli\u003eE-stop safety power switch\u003c\/li\u003e\n\u003cli\u003eSpindle on-off button\u003c\/li\u003e\n\u003cli\u003eForward\/reverse button for spindle and lead screw direction\u003c\/li\u003e\n\u003cli\u003eReversible lead screw allows for right- and left-hand threading\u003c\/li\u003e\n\u003cli\u003eExtended threading capability - inch and metric threads\u003c\/li\u003e\n\u003cli\u003eZero-resettable dials graduated at 0.001\" and advancing 0.050\" per turn\u003c\/li\u003e\n\u003cli\u003eCam-lock tailstock\u003c\/li\u003e\n\u003cli\u003eFour-way tool post\u003c\/li\u003e\n\u003cli\u003e5\" (125 mm) 3-jaw self centering lathe chuck\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Bench Lathe comes with the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5\" (125 mm) 3-jaw self centering lathe chuck with two sets of jaws and a chuck wrench\u003c\/li\u003e\n\u003cli\u003e4-Way rotating tool post\u003c\/li\u003e\n\u003cli\u003eA #4 Morse taper dead center for the headstock\u003c\/li\u003e\n\u003cli\u003eA #2 Morse taper dead center for the tailstock\u003c\/li\u003e\n\u003cli\u003eChange gear set - 18 Gears - 35, 40, 45, 49, 50(x2), 55, 56, 60, 70, 80, 85, 87, 90, 94, 100(x2), 127 teeth\u003c\/li\u003e\n\u003cli\u003eGears installed on the lathe include 30, 60, 66(x2), 120(x2) teeth\u003c\/li\u003e\n\u003cli\u003eThree open end wrenches: 8\/10 mm, 14\/17 mm, 17\/19 mm\u003c\/li\u003e\n\u003cli\u003eFive hex (Allen) wrenches: 2, 3, 4, 5, 6 mm\u003c\/li\u003e\n\u003cli\u003eUsers Manual\u003c\/li\u003e\n\u003cli\u003eInspection Report\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eThe LittleMachineShop.com model 7600 HiTorque 9x20 Bench Lathe is a version of the SIEG SC50 bench lathe. This lathe does not come with chip tray, but can be ordered separately\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003e\u003cstrong\u003e*If you intend to add an AXA quick change tool post, you will need the 6728 conversion kit for the compound.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sieg Industrial Group","offers":[{"title":"Default Title","offer_id":45473366311093,"sku":"7600","price":3299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/7600.jpg?v=1751494724"},{"product_id":"hitorque-9x20-deluxe-bench-lathe-led-display","title":"HiTorque 9x20 Deluxe Bench Lathe, LED Display","description":"\u003cp\u003eThe LittleMachineShop.com model 7650 HiTorque 9x20 Deluxe Bench Lathe is the best in its class. It is a significant step up in size, rigidity, and power compared to a mini lathe. This bench top lathe provides a larger bed, more swing over bed, more horsepower, and more rigidity. Compare our standard features and specs to others in this size and price range.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNEW larger spindle through hole - 1.1\" (28 mm) accepts 1\" stock.\u003c\/li\u003e\n\u003cli\u003eNEW greater swing from 8.5\" to 9\"\u003c\/li\u003e\n\u003cli\u003eNEW easy-to-read LED display with built in speed readout\u003c\/li\u003e\n\u003cli\u003eNEW factory installed hard-wired DRO on cross slide and carriage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Deluxe model includes digital readouts (DRO) on the compound rest, cross slide, carriage, and tailstock. Cross slide and carriage DROs feed data from mounted scales to a large display, while compound and tailstock use digital readouts on leadscrews. The DRO system measures in increments .0002\" and comes factory installed on the lathe. All DROs read equally accurately in inches and mm.\u003c\/p\u003e\n\u003cp\u003eThe Deluxe model also includes an AXA quick change tool post set with five tool holders; anodized aluminum hand wheels; aluminum knobs and levers; and a heavy-duty splash guard that covers the full bed length. In addition, the compound rest is modified to better accommodate the quick-change tool post.\u003c\/p\u003e\n\u003cp\u003eThe 1000-Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 rpm to 2000 rpm continuously in both directions. There are no gears to shift. NSK brand Japanese-quality spindle bearings ensure years of quiet operation.\u003c\/p\u003e\n\u003cp\u003eNEW easy-to-read LED display with built in speed readout allows you to stop and then restart the lathe at a pre-selected speed.\u003c\/p\u003e\n\u003cp\u003eA power cross feed is a feature not found in other lathes of this size. The cross feed and compound rest dials are graduated in 0.001\" and advance 0.050\" per turn.\u003c\/p\u003e\n\u003cp\u003eA reversible 2 mm pitch lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 6 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.25 to 4 mm pitch with the change gears that are included. All the gears on this lathe are metal.\u003c\/p\u003e\n\u003cp\u003eFeatures for the model 7650 deluxe lathe\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNEW larger spindle through hole - 1.1\" (28 mm) accepts 1\" stock.\u003c\/li\u003e\n\u003cli\u003eNEW greater swing from 8.5\" to 9\"\u003c\/li\u003e\n\u003cli\u003eNEW easy-to-read LED display with built in speed readout\u003c\/li\u003e\n\u003cli\u003eNEW factory installed hard-wired DRO on cross slide and carriage\u003c\/li\u003e\n\u003cli\u003eDRCD digital readout on compound and tailstock\u003c\/li\u003e\n\u003cli\u003eAll DROs read equally accurately in inches and mm.\u003c\/li\u003e\n\u003cli\u003eAXA quick change tool post set\u003c\/li\u003e\n\u003cli\u003e1000-Watt output spindle motor with spindle speed display\u003c\/li\u003e\n\u003cli\u003eGenuine NSK bearings\u003c\/li\u003e\n\u003cli\u003eMetal gears\u003c\/li\u003e\n\u003cli\u003eInduction hardened ways\u003c\/li\u003e\n\u003cli\u003ePower longitudinal feed\u003c\/li\u003e\n\u003cli\u003ePower cross feed\u003c\/li\u003e\n\u003cli\u003eE-stop safety power switch\u003c\/li\u003e\n\u003cli\u003eSpindle on-off button\u003c\/li\u003e\n\u003cli\u003eForward\/reverse button for spindle and lead screw direction\u003c\/li\u003e\n\u003cli\u003eReversible lead screw allows for right- and left-hand threading\u003c\/li\u003e\n\u003cli\u003eExtended threading capability - inch and metric threads\u003c\/li\u003e\n\u003cli\u003eZero-resettable dials graduated at 0.001\" and advancing 0.050\" per turn\u003c\/li\u003e\n\u003cli\u003eCam-lock tailstock\u003c\/li\u003e\n\u003cli\u003e5\" (125 mm) 3-jaw self-centering lathe chuck\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Bench Lathe comes with the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5\" (125 mm) 3-jaw self centering lathe chuck with two sets of jaws and a chuck wrench\u003c\/li\u003e\n\u003cli\u003e4-Way rotating tool post\u003c\/li\u003e\n\u003cli\u003eA #4 Morse taper dead center for the headstock\u003c\/li\u003e\n\u003cli\u003eA #2 Morse taper dead center for the tailstock\u003c\/li\u003e\n\u003cli\u003eChange gear set - 18 Gears - 35, 40, 45, 49, 50(x2), 55, 56, 60, 70, 80, 85, 87, 90, 94, 100(x2), 127 teeth\u003c\/li\u003e\n\u003cli\u003eGears installed on the lathe include 30, 60, 66(x2), 120(x2) teeth\u003c\/li\u003e\n\u003cli\u003eThree open end wrenches: 8\/10 mm, 14\/17 mm, 17\/19 mm\u003c\/li\u003e\n\u003cli\u003eFive hex (Allen) wrenches: 2, 3, 4, 5, 6 mm\u003c\/li\u003e\n\u003cli\u003eUser's Manual\u003c\/li\u003e\n\u003cli\u003eInspection Report\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eThe LittleMachineShop.com model 7600 HiTorque 9x20 Bench Lathe is a version of the SIEG SC50 bench lathe. This lathe does not come with chip tray, but can be ordered separately\u003c\/em\u003e\u003c\/p\u003e","brand":"Sieg Industrial Group","offers":[{"title":"Default Title","offer_id":45473367195829,"sku":"7650","price":3999.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/7650.jpg?v=1751494736"},{"product_id":"users-guide-hitorque-mini-mill-tilting-column-3900-closeout","title":"Users Guide, HiTorque Mini Mill, Tilting Column, 3900","description":"\u003cp\u003e\u003cem\u003eYou can download for FREE below, but if you would like us to print them out for you and send them to you, we can also do that.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is the manual that comes with our 3900 mini mill\u003c\/span\u003e\u003c\/p\u003e","brand":"LittleMachineShop.com","offers":[{"title":"Default Title","offer_id":52165578227893,"sku":"4925","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/4925.jpg?v=1768869204"},{"product_id":"users-guide-hitorque-micro-mill-er-16-4660-closeout","title":"Users Guide, HiTorque Micro Mill, ER-16, 4660","description":"\u003cp\u003e\u003cem\u003eYou can download for FREE below, but if you would like us to print them out for you and send them to you, we can also do that.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMini Mill Users Guide\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy Chris Wood\u003c\/p\u003e\n\u003cp\u003e30 pages\u003c\/p\u003e\n\u003cp\u003eThis booklet covers the following topics: Specifications, Safety Considerations, Features, Basic Accessories, Cleaning, Mounting Your Mill, Operating Controls, Adjustments, Lubrication, Changing Spindle Tools, Squaring a Vise, Using Parallels, Clamping with a Clamping Kit, Finding the Edge of a Workpiece, Drilling, Milling, Conventional Milling Versus Climb Milling, Plunge Milling, Milling Slots, Surfacing, Common Accessories, and Maintenance.\u003c\/p\u003e","brand":"LittleMachineShop.com","offers":[{"title":"Default Title","offer_id":52165578260661,"sku":"4929","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/4929.jpg?v=1768869204"},{"product_id":"hitorque-7350-deluxe-mini-lathe-7x16-clearance","title":"HiTorque 7350 Deluxe Mini Lathe - 7x16 CLEARANCE","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eThis lathe was damaged in transit, but fixed and ready to be put to work. May be some extremely minor cosmetic damage, but nothing functional. See Pictures.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe LittleMachineShop.com HiTorque 7x16 Mini Lathe is the best in its class. It has the most power, most torque, and a longer center distance than other lathes in its class.\u003c\/p\u003e\n\u003cp\u003eThis DELUXE Lathe has the following upgraded features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis lathe comes equipped with digital readouts on the cross slide, compound rest, and tailstock quill.\u003c\/li\u003e\n\u003cli\u003eAttractive hand wheels are all metal, and the levers are chrome.\u003c\/li\u003e\n\u003cli\u003eThe all steel, wedge-type quick change tool posts accepts turning tools up to 1\/2\" shank. It comes with five toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 500-Watt brushless spindle drive motor provides tremendous low-end torque. You can vary the speed from 50 rpm to 2500 rpm continuously in both directions. There are no gears to shift. NSK Bearings ensure years of accurate and reliable life.\u003c\/p\u003e\n\u003cp\u003eThe cross feed and compound rest dials are graduated in 0.001\" and 0.025 mm. A 4\" 3-jaw lathe chuck is included, and the lathe is equipped with a 4-way indexing tool post set for 5\/16\" (8 mm) tools.\u003c\/p\u003e\n\u003cp\u003eReal top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.35 to 8 mm pitch with the extra 21 tooth change gear that is included. Cutting inch threads is made even easier with the factory-installed threading dial.\u003c\/p\u003e\n\u003cp\u003eThis machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag--no solvents necessary.\u003c\/p\u003e\n\u003cp\u003eThe LittleMachineShop.com exclusive version of this machine features:\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eDigital readouts on the compound rest, cross slide, and tailstock quill\u003c\/li\u003e\n\u003cli\u003e0XA wedge-type Quick change tool post set with five tool holders\u003c\/li\u003e\n\u003cli\u003eFull 14\" bed length with a cam-lock tailstock for longer work pieces.\u003c\/li\u003e\n\u003cli\u003e500-Watt spindle motor with 2 Speed ranges for low speed torque\u003c\/li\u003e\n\u003cli\u003eNSK brand Japanese bearings\u003c\/li\u003e\n\u003cli\u003eDigital spindle speed readout\u003c\/li\u003e\n\u003cli\u003eReal top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability.\u003c\/li\u003e\n\u003cli\u003eThreading dial\u003c\/li\u003e\n\u003cli\u003eThe cross feed and compound rest dials are graduated in 0.001\" and 0.025 mm.\u003c\/li\u003e\n\u003cli\u003eThe lathe is equipped with a 4-way indexing tool post set for 5\/16\" (8 mm) tools.\u003c\/li\u003e\n\u003cli\u003eChip tray and backsplash.\u003c\/li\u003e\n\u003cli\u003eUser’s Manual\u003c\/li\u003e\n\u003cli\u003eMade and inspected in an ISO 9001 compliant factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe LittleMachineShop.com exclusive version of this machine includes:\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003e4\" (100 mm) 3-jaw self-centering lathe chuck with two sets of jaws and a chuck wrench\u003c\/li\u003e\n\u003cli\u003eA #2 Morse Taper (2MT) dead center\u003c\/li\u003e\n\u003cli\u003e11-piece Change gear set\u003c\/li\u003e\n\u003cli\u003eTwo open end wrenches\u003c\/li\u003e\n\u003cli\u003eFour hex (Allen) wrenches\u003c\/li\u003e\n\u003cli\u003eA plastic oil can \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe LittleMachineShop.com model 7350 HiTorque Mini Lathe is a version of the SIEG SC2.\u003c\/p\u003e","brand":"LittleMachineShop.com","offers":[{"title":"Default Title","offer_id":52862218141877,"sku":"C0008","price":1699.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/7350.jpg?v=1782506965"},{"product_id":"hitorque-7350-deluxe-mini-lathe-7x16-clearance-copy","title":"HiTorque 7350 Deluxe Mini Lathe - 7x16 CLEARANCE","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eThis lathe was damaged in transit, but fixed and ready to be put to work. May be some extremely minor cosmetic damage, but nothing functional. See Pictures.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe LittleMachineShop.com HiTorque 7x16 Mini Lathe is the best in its class. It has the most power, most torque, and a longer center distance than other lathes in its class.\u003c\/p\u003e\n\u003cp\u003eThis DELUXE Lathe has the following upgraded features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis lathe comes equipped with digital readouts on the cross slide, compound rest, and tailstock quill.\u003c\/li\u003e\n\u003cli\u003eAttractive hand wheels are all metal, and the levers are chrome.\u003c\/li\u003e\n\u003cli\u003eThe all steel, wedge-type quick change tool posts accepts turning tools up to 1\/2\" shank. It comes with five toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 500-Watt brushless spindle drive motor provides tremendous low-end torque. You can vary the speed from 50 rpm to 2500 rpm continuously in both directions. There are no gears to shift. NSK Bearings ensure years of accurate and reliable life.\u003c\/p\u003e\n\u003cp\u003eThe cross feed and compound rest dials are graduated in 0.001\" and 0.025 mm. A 4\" 3-jaw lathe chuck is included, and the lathe is equipped with a 4-way indexing tool post set for 5\/16\" (8 mm) tools.\u003c\/p\u003e\n\u003cp\u003eReal top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.35 to 8 mm pitch with the extra 21 tooth change gear that is included. Cutting inch threads is made even easier with the factory-installed threading dial.\u003c\/p\u003e\n\u003cp\u003eThis machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag--no solvents necessary.\u003c\/p\u003e\n\u003cp\u003eThe LittleMachineShop.com exclusive version of this machine features:\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eDigital readouts on the compound rest, cross slide, and tailstock quill\u003c\/li\u003e\n\u003cli\u003e0XA wedge-type Quick change tool post set with five tool holders\u003c\/li\u003e\n\u003cli\u003eFull 14\" bed length with a cam-lock tailstock for longer work pieces.\u003c\/li\u003e\n\u003cli\u003e500-Watt spindle motor with 2 Speed ranges for low speed torque\u003c\/li\u003e\n\u003cli\u003eNSK brand Japanese bearings\u003c\/li\u003e\n\u003cli\u003eDigital spindle speed readout\u003c\/li\u003e\n\u003cli\u003eReal top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability.\u003c\/li\u003e\n\u003cli\u003eThreading dial\u003c\/li\u003e\n\u003cli\u003eThe cross feed and compound rest dials are graduated in 0.001\" and 0.025 mm.\u003c\/li\u003e\n\u003cli\u003eThe lathe is equipped with a 4-way indexing tool post set for 5\/16\" (8 mm) tools.\u003c\/li\u003e\n\u003cli\u003eChip tray and backsplash.\u003c\/li\u003e\n\u003cli\u003eUser’s Manual\u003c\/li\u003e\n\u003cli\u003eMade and inspected in an ISO 9001 compliant factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe LittleMachineShop.com exclusive version of this machine includes:\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003e4\" (100 mm) 3-jaw self-centering lathe chuck with two sets of jaws and a chuck wrench\u003c\/li\u003e\n\u003cli\u003eA #2 Morse Taper (2MT) dead center\u003c\/li\u003e\n\u003cli\u003e11-piece Change gear set\u003c\/li\u003e\n\u003cli\u003eTwo open end wrenches\u003c\/li\u003e\n\u003cli\u003eFour hex (Allen) wrenches\u003c\/li\u003e\n\u003cli\u003eA plastic oil can \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe LittleMachineShop.com model 7350 HiTorque Mini Lathe is a version of the SIEG SC2.\u003c\/p\u003e","brand":"LittleMachineShop.com","offers":[{"title":"Default Title","offer_id":52886121840821,"sku":"C0009","price":1699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/7350.jpg?v=1782506965"},{"product_id":"hitorque-7450-deluxe-mini-lathe-7x16-led-display-clearance","title":"HiTorque 7450 Deluxe Mini Lathe - 7x16, LED Display CLEARANCE","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eThis machine was cleaned and used for our website photography. We are selling at a discounted price.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe LittleMachineShop.com HiTorque 7450 Mini Lathe is the best in its class. It has the most power, the most torque, the most features and upgrades, and the longest bed in its class. It is also proof that all lathes are not the same.\u003c\/p\u003e\n\u003cp\u003eMost noticeable is the LED mirror display which clearly and elegantly organizes the key controls for the lathe. All controls are Illuminated, and it includes a start\/stop button, a spindle direction button and emergency power (E-stop) switch. A variable speed control knob allows accurate control of spindle speeds, while an integrated spindle speed display clearly displays the speed.\u003c\/p\u003e\n\u003cp\u003eThe 7450 lathe also comes equipped with a 2-axis tablet display DRO connected via Bluetooth to magnetic scales on the longitudinal and cross feeds. It also has 2 digital readouts on the compound rest and tailstock. The DRO system measures in increments 0.0002\" and comes factory installed on the lathe. The cross feed and compound rest dials are graduated in 0.001\" and 0.025 mm.\u003c\/p\u003e\n\u003cp\u003eA 500-Watt brushless DC spindle drive motor and belt drive provides tremendous power and low-end torque. There are NO gears to shift, so no gears to break. The drive allows for spindle speeds from 100 to 2500 RPM continuously in both directions. NSK brand Japanese-quality spindle bearings ensure smooth and quiet operation.\u003c\/p\u003e\n\u003cp\u003eStandard on the lathe is an all steel, wedge-type quick change tool post which accepts turning tools up to 1\/2\" shank. Five toolholders are also included for the most common tools and tasks. The lathe also comes with a 4\" Sanou lathe chuck, a Morse taper #2 dead center for the tailstock, and an 11-gear change gear set.\u003c\/p\u003e\n\u003cp\u003eReal top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.35 to 8 mm pitch with the extra 21 tooth change gear that is included. Cutting inch threads is made even easier with the factory-installed threading dial.\u003c\/p\u003e\n\u003cp\u003eThis machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag--no solvents necessary.\u003c\/p\u003e\n\u003cp\u003eThe LittleMachineShop.com exclusive version of this machine features:\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eLED display with illuminated controls and integrated spindle speed readout\u003c\/li\u003e\n\u003cli\u003eFactory installed 2-axis DRO with 7\" Android tablet readout on carriage and cross feed\u003c\/li\u003e\n\u003cli\u003eDigital readouts on the compound rest, and tailstock quill\u003c\/li\u003e\n\u003cli\u003e0XA wedge-type Quick change tool post set with five tool holders\u003c\/li\u003e\n\u003cli\u003eAluminum hand wheels and Chrome levers\u003c\/li\u003e\n\u003cli\u003eFull 16\" bed length with a cam-lock tailstock for longer work pieces.\u003c\/li\u003e\n\u003cli\u003e500-Watt brushless DC spindle motor for low speed torque\u003c\/li\u003e\n\u003cli\u003eNSK brand Japanese bearings\u003c\/li\u003e\n\u003cli\u003eDigital spindle speed readout\u003c\/li\u003e\n\u003cli\u003eReal top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability.\u003c\/li\u003e\n\u003cli\u003eThreading dial\u003c\/li\u003e\n\u003cli\u003eThe cross feed and compound rest dials are graduated in 0.001\" and 0.025 mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDeluxe Heavy Duty Chip tray and backsplash.\u003c\/li\u003e\n\u003cli\u003eUser’s Manual\u003c\/li\u003e\n\u003cli\u003eMade and inspected in an ISO 9001 compliant factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe LittleMachineShop.com exclusive version of this machine includes:\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003e4\" (100 mm) 3-jaw self-centering lathe chuck with two sets of jaws and a chuck wrench\u003c\/li\u003e\n\u003cli\u003eA #2 Morse Taper (2MT) dead center\u003c\/li\u003e\n\u003cli\u003e11-gear change gear set that includes a 21-tooth gear for accurate metric threading\u003c\/li\u003e\n\u003cli\u003eTwo open end wrenches\u003c\/li\u003e\n\u003cli\u003eFour hex (Allen) wrenches\u003c\/li\u003e\n\u003cli\u003eA plastic oil can \u003c\/li\u003e\n\u003cli\u003eConvenient toolbox to hold accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe LittleMachineShop.com model 7450 HiTorque Mini Lathe is a version of the SIEG SC2.\u003c\/p\u003e","brand":"LittleMachineShop.com","offers":[{"title":"Default Title","offer_id":52886150938805,"sku":"C0010","price":2399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/files\/7450.jpg?v=1769801240"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/3157\/2405\/collections\/HiTorque-Logo-1280x1280.jpg?v=1781643181","url":"https:\/\/littlemachineshop.com\/collections\/hitorque.oembed?page=2","provider":"LittleMachineShop.com","version":"1.0","type":"link"}