Part Number: 2653
Weight: 9.95 lb
Purchased individually $106.80
Share this page:
- This kit contains the basics you need to start using your new micro mill
- 36-piece clamping kit for 5/16" (8 mm) T-slots
- Thin parallels (3" long)
- 1-2-3 blocks
- Edge and center finder
This kit contains the basics you need to start using your new micro mill.
The clamping kit fits the 8 mm T-slots on the micro mill. The clamping kit includes10 M6 studs, 4 step block pairs, 6 T-slot nuts, 6 flange nuts, and 6 step clamps.
The thin parallels are a set of 10 matched pairs of high grade steel parallels, precision ground and hardened. The parallels are 1/8" thick and 3" long. The heights are 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8".
They are made of high grade alloy steel hardened to 52 to 58 Rc and are parallel within 0.0002" on the top and bottom. The pairs are matched in height within 0.0004".
The precision 1-2-3 blocks are ground and case hardened on all sides to 50-60 Rc. The blocks are 1" by 2" by 3". They are parallel within 0.0002", flat within 0.0002" and square within 0.0002". Each set includes two matched blocks. The blocks have 23 holes through them, 5 are threaded 3/8"-16 NC.
The 3/8" diameter combination edge and center finder helps you locate work on your mill. The edge finder end has a 0.200" diameter cylinder to quickly find the edge of a work piece. The center finder end tapers to a point to locate holes. The edge and center finder is hardened and ground all over.
This product contains the following items:
This product works with the following mills. (If your machine is not on this list, check with us before ordering.)
- Clarke CMD10 Metalworker Micro Mill
- Harbor Freight 47158 Central Machinery Micro Mill
- SIEG X1 Micro Mill
- SIEG SX1 Micro Mill
- LittleMachineShop.com 4660 HiTorque Micro Mill
- LittleMachineShop.com 4700 HiTorque Micro Mill
- SIEG SX1P Micro Mill
Click here to see the tabs view of this page.