LittleMachineShop.com is the premier source of tooling, 
parts, and accessories for bench top machinists.  
Contact Us (800) 981 9663
Your Orders
Cart  Cart
   

On Sale
Value Packs
New Products
All Products
Catalog
Store Location
Outlet Store

 
Have you seen?
End Mill Set, 6 Piece 4 Flute, Cobalt
 
 
Most Popular of
Machinist Books
Mini-Lathe for Home Machinists
Mini-Lathe for Home Machinists
Additional popular items
 

Machinist's Calculator

Our mobile app; read this with your phone.
lmscnc.com/calc

 
Onliine Metals  

 

  
Products > Kits > Mill Starter Kits      

Tooling Package, 2MT Micro Mill

          
Tooling Package, 2MT Micro Mill
Part Number: 3491
Weight: 22.9 lb
$314.65 Value Price

Purchased individually $350.02

In stock
Quantity:

The price above includes $14.70 tariff surcharge.
Tariff info

 
 
Share this page:
http://lmscnc.com/3491
 

Related Products

Vise Jaws
Vise Jaws

  • 3" toolmakers screwless vise and 10 pairs of 3" long thin parallels
  • Precision 1-2-3 Blocks and 36-piece Clamping Kit – 8 mm T-slot
  • Two 6-piece end mill sets, 2 & 4 flute and 5 center drills
  • Seven piece 2MT collet set
  • Combination edge and center finder

Description

Tooling package with all the essentials for a 2MT micro mill.

Toolmakers Vise: 3" toolmakers screwless vice has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002". There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects. The vise jaws are 1.38" deep and open to 3.78" capacity. The vise is 7.28" long, 2.76" tall and 2.785" wide.

Thin Parallels: Set of ten pairs, 1/8" thick x 3" long, in fitted case. Made of high-grade alloy steel hardened to 52–58 Rc, parallel within 0.0002" on top and bottom.

Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" (pairs matched within 0.0004").

Clamping Kit: 36-piece kit fits 8 mm T-slots on a micro mill. Includes 10 M6 studs, 4 step block pairs, 6 T-slot nuts, 6 flange nuts, and 6 step clamps.

End Mills: 6-piece 4 flute & 6-piece 2 flute, HSS, center cutting end mill sets. Sizes 1/8", 3/16", 1/4", 5/16", 3/8", and 1/2". All with 3/8" shanks.

2MT Collets: Set of seven high-grade tool hardened steel round collets, sizes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2". The drawbar thread is 3/8"-16. This set includes all the sizes required for common end mills.

1-2-3 Blocks: Ground and hardened on all sides to 50-60 Rc, sizes 1" x 2" x 3". Parallel within 0.0002", flat within 0.0002", and square within 0.00021". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC.

Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks.

Chris' Tips

Chris Chris' Tips
The components of this package have a retail value over $335.00, so this package saves you over $35.

Take a look at our vise comparison page before you choose a vise.Combined drills and countersinks, commonly called center drills, are used to produce a center hole on a workpiece for turning between centers. Center drills are also used to start drilled holes. Because they are very stiff they don't have a tendency to wander.


Here are the sizes of center drills.
Number Body Dia. Drill Dia. Length
1 1/8" 3/64" 1 1/4"
2 3/16" 5/64" 1 7/8"
3 1/4" 7/64" 2"
4 5/16" 1/8" 2 1/8"
5 7/16" 3/16"  2 3/4"

Contents

This product contains the following items:
  P/N Description Quantity
Blocks, 1-2-3 1233 Blocks, 1-2-3 1
Center Drills, HSS, Set of 5 (Numbers 1-5) 1230 Center Drills, HSS, Set of 5 (Numbers 1-5) 1
Clamping Kit, 8 mm T-Slot, 44-Piece 2039 Clamping Kit, 8 mm T-Slot, 44-Piece 1
Clamps, Screwless Vise 2675 Clamps, Screwless Vise 1
Collet Set, 2MT, Set of 7 1752 Collet Set, 2MT, Set of 7 1
Edge and Center Finder, 3/8" Shank 1240 Edge and Center Finder, 3/8" Shank 1
End Mill Set, 6 Piece 2 Flute, HSS 1242 End Mill Set, 6 Piece 2 Flute, HSS 1
End Mill Set, 6 Piece 4 Flute, HSS 1243 End Mill Set, 6 Piece 4 Flute, HSS 1
Thin Parallels, 3" Long, 10 Pairs 1893 Thin Parallels, 3" Long, 10 Pairs 1
Vise Mounting Kit, 8 mm T-Slot 4973 Vise Mounting Kit, 8 mm T-Slot 1
Vise, 3" Screwless 1590 Vise, 3" Screwless 1

Compatibility

Compatibility

This product works with the following mills:

  •   Clarke CMD10 Metalworker Micro Mill
  •   Harbor Freight 47158 Central Machinery Micro Mill
  •   SIEG X1 Micro Mill
  •   SIEG SX1 Micro Mill
  •   LittleMachineShop.com 4660 HiTorque Micro Mill
  •   LittleMachineShop.com 4700 HiTorque Micro Mill
  •   SIEG SX1P Micro Mill

 

Click here to see the tabs view of this page.

 

Contact Us / Company Info / Privacy Policy / Warranty / Terms & Conditions / Payment Options / Shipping Rates & Policies
Copyright © 2007-2019 LittleMachineShop.com
 
Phone: (800) 981-9663