Most powerful micro milling machine in its class & most low-speed torque in its class
No gears in spindle drive
#2 Morse taper spindle
Digital spindle speed readout
Description
The LittleMachineShop.com HiTorque Micro Mill is the best in its class. It has the most power, most torque, and a larger table than other mills in its class.
The 250 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 rpm to 5000 rpm continuously. There are no gears or belts to shift. And, with no gears, the HiTorque Micro Mill is the quietest in its class.
The large mill table provides 50% more width than other micro mills. The resettable feed dials allow you to zero them at any point.
The HiTorque Micro Mill has a drill press handle for drilling. It also has Z-axis fine feed with 0.001" resolution for milling operations.
This is a version of the SIEG SX1P micro milling machine for sale.
Chris' Tips
Chris' Tips You can compare the specifications for our mills.Here are data sheets for the machines that we sell.Here are the user's guides for our machines.These machines are fully assembled, adjusted, and tested at the factory. Then the column and head is removed from the base so they can ship in two components. This reduces the shipping cost by about half.
When you get the machine, use the four bolts provided to fasten the column to the base and you are ready to go. The manual has complete instructions.We have no expectation that any HiTorque machine will work on a circuit with a Ground-Fault Circuit Interrupter (GFCI). The National Electric Code has a specific exception to the requirement that receptacles in a garage or work area have GFCI: "Exception No. 2: A single receptacle or a duplex receptacle for two appliances that, in normal use, is not easily moved from one place to another and that is cord-and-plug connected".
Features
250 Watt output spindle motor
Large X-Y table
#2 Morse taper spindle
Solid column that does not tilt
Dovetail column maintains head alignment at any height
Fine feed on Z-axis for precise control
Radial handle for drilling
E-stop safety power switch
Adjustable Z-axis stop for repetitive drilling
Adjustable gibs on all dovetail ways
Includes 3/8" capacity drill chuck and arbor
Specifications
Specifications
End Milling Capacity
0.4" (10 mm)
Face Milling Capacity
0.6" (16 mm)
Drilling Capacity
0.4" (10 mm)
Table Size
15.7" x 5.7" (400 mm x 145 mm)
T-slots
3 slots 0.31" (8.0 mm) wide
X-Axis Travel
11.8" (300 mm)
Y-Axis Travel
5.9" (150 mm)
Z-Axis Travel
8.7" (220 mm)
Throat
5.5" (140 mm)
X- and Y-Axis Feed Screws
0.050" (1.27 mm) per rotation
Head Tilt
None
Quill Travel
0.9" (22 mm)
Positioning Accuracy
0.0004" (0.010 mm)
Spindle Taper
2 Morse Taper
Spindle Motor
0.34 hp (250 Watts)
Spindle Speed
100 - 5000 RPM
Power Requirements
120 V 60 Hz 5 Amps
Machine Weight
106 lbs (48 kg)
Base Dimensions (W x D)
8.5" x 14.0" (216 mm x 356 mm)
Mounting Holes Center to Center (W x D)
7.09" x 11.81" (180.0 mm x 300.0 mm)
Overall Dimensions (W x D x H)
20.5" x 19.3" x 28.7" (520 mm x 490 mm x 730 mm)
Crated Weight
117 lbs (53 kg)
Photos
4700 HiTorque Micro Mill, 2MT Spindle
Contents
The HiTorque Micro Mill comes with the following:
Micro Mill Users Guide written by Chris Wood
Four T-slot nuts
Two end wrenches
Three hex (Allen) wrenches
One spanner wrench
Oil can (plastic)
Drawbar with 3/8"-16 thread
3/8" capacity drill chuck with key and arbor
Spindle locking handle
Four adjustable feet
Compatibility
Compatibility
This product works with these LittleMachineShop.com products:
These machines are packaged in two pieces so they can ship by UPS parcel service as well as by mail. This saves considerably on the shipping cost. (Sorry, they do not fit in flat rate boxes.)
When you place your order on our Web site the Shopping Cart will show you the correct cost of shipping your order.
Chris' Tips