LittleMachineShop.com is the premier source of tooling, 
parts, and accessories for bench top machinists.  
Contact Us (800) 981 9663
Your Orders
Cart  Cart
   

On Sale
Value Packs
New Products
All Products
Catalog
Store Location
Outlet Store

 
Have you seen?
Digital Position Readout, 3-Axis Bluetooth for Mini Mill
 
 
 

Machinist's Calculator

Our mobile app; read this with your phone.
lmscnc.com/calc

 
Onliine Metals  

 

  
Products > Kits > Lathe Starter Kits      

Tooling Package, 5200 Mini Lathe Premium

          
Tooling Package, 5200 Mini Lathe Premium
Part Number: 5125
Weight: 3.17 lb
$158.78 Value Price

Purchased individually $173.60

In stock
Quantity:

The price above includes $3.83 tariff surcharge.
Tariff info

 
 
Share this page:
http://lmscnc.com/5125
 
PayPal Credit
 
  • 1/2" professional grade drill chuck
  • 2MT standard to 33JT drill chuck arbor
  • 3/8"- 6" long indexable boring bar – CCMT inserts
  • 3/8" indexable TCMT carbine inserts
  • Premium P1 cut-off blade, 5 center drills

Description

This package contains our best versions of all the tooling you need to be productive with your 7x10, 7x12, 7x14, or 7x16 mini lathe.

The package does not include a quick change tool post because there is one on the model 5200 lathe.

Drill Chuck: The 1/2" capacity professional grade drill chuck is mounted on a short 2MT shank for the mini lathe. Specifically designed for the mini lathe tailstock, the rated capacity is 1 mm (0.039") to 13 mm (0.512"). All working parts are hardened. Chuck key included. Number 33 Jacobs taper mount. This chuck is comparable to a Jacobs 34-33 heavy duty drill chuck, including the runout specification of 0.004" (0.10 mm) or less.

Indexable Inserts: Indexable turning tools are made by AR Warner Co in the USA. These Warner precision tool holder kits use carbide inserts and include three styles of tools, AR right hand, E Neutral (threading tool - 60° angle), and AL left hand. Kit includes three tool holders, TCMT inserts, one extra TCMT-21.52 carbide insert, one extra Torx screw, and one wrench.

Boring Bar: This 3/8" diameter indexable boring bar uses CCMT inserts and is 6" long. The minimum bore diameter for this is 0.50". The boring bar takes CCMT 21.51 or CCMT 21.52 inserts.

Cut-Off Blade: The premium P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS by Arthur R. Warner Co. in the USA. These T-shape parting blades provide great side clearance.

Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks.

Chris' Tips

Chris Chris' Tips
This product is specifically designed for use on the mini lathe tailstock.

The 2 Morse taper is the correct length for the lathes listed below. Don't buy this product for other lathes as it won't eject from the tailstock when you retract the quill.

If you want this product for a Grizzly G0765 7x14 lathe, put a note on your order: "For a G0765. Need a standard length drill chuck arbor." We will substitute the correct arbor.

Make sure you get the correct inserts and retaining screws for your indexable turning tools.

Our chart of indexable inserts shows which inserts and which screw to use with each of our indexable tools.

P-type cut-off (or parting) blades are T-shaped (don't ask). Because the body of the tool is narrower than the cutting tip, friction is reduced making the difficult task of parting off somewhat easier.

Size P1 blades are 1/16" wide and are the most commonly-used size. P1N blades are 0.040" wide. These thinner blades are good for small work. P1X blades are 5/64" wide. Use these thicker blades for parting off larger diameters where you need additional stiffness.

It is easier to part off large diameters if you cut a groove that is wider than the cut-off blade. First, make a cut about 0.100" deep. Now back out and move over at least 0.010". Cut in again, widening the slot. Continue with this cut until you are 0.100" deeper than the first slot. Repeat this process, moving back and forth, until you are through.

Combined drills and countersinks, commonly called center drills, are used to produce a center hole on a workpiece for turning between centers. Center drills are also used to start drilled holes. Because they are very stiff they don't have a tendency to wander.


Here are the sizes of center drills.
Number Body Dia. Drill Dia. Length
1 1/8" 3/64" 1 1/4"
2 3/16" 5/64" 1 7/8"
3 1/4" 7/64" 2"
4 5/16" 1/8" 2 1/8"
5 7/16" 3/16"  2 3/4"

Contents

This product contains the following items:
  P/N Description Quantity
Arbor, Drill Chuck 2MT Short to 33JT 1804 Arbor, Drill Chuck 2MT Short to 33JT 1
Boring Bar, 3/8" Indexable 1779 Boring Bar, 3/8" Indexable 1
Center Drills, HSS, Set of 5 (Numbers 1-5) 1230 Center Drills, HSS, Set of 5 (Numbers 1-5) 1
Cut-Off Blade, P1, M2 HSS 1728 Cut-Off Blade, P1, M2 HSS 1
Drill Chuck, 1/2" Professional Grade 3153 Drill Chuck, 1/2" Professional Grade 1
Turning Tools, 3/8" Indexable, CarbideTriangle Inserts, A R Warner Kit #30, Set of 3 4132 Turning Tools, 3/8" Indexable, CarbideTriangle Inserts, A R Warner Kit #30, Set of 3 1

 

Click here to see the tabs view of this page.

 

Contact Us / Company Info / Privacy Policy / Warranty / Terms & Conditions / Payment Options / Shipping Rates & Policies
Copyright © 2007-2019 LittleMachineShop.com
 
Phone: (800) 981-9663