Collet Nut, ER-32
- Fits ER-32 collet chucks
This is an M-type M40-1.5 ER-32 collet chuck nut.
With all ER collet chucks, the collet must be snapped into the nut before placing it into the chuck. There is an eccentric ring inside the nut that engages the groove in the collet. That is what makes them self-ejecting. Tilt the collet again to remove it from the nut.
|Reverse side of the ER-32 Collet Nut
Thread M40 X 1.50
D (mm) 50
L (mm) 22.5