The diamond pattern created by knurling allows you to get a better grip on round objects. LittleMachineShop.com has knurlers specifically designed for small lathes.
|
The 4th Axis kit includes a motorized rotary table, driver, and complete installation wiring harness to add a 4th axis to the PCNC 770 or PCNC 1100. The kit supports coordinated motion between X, Y, Z and 4th axis.
The 4th axis extends your machining capability to include rotation of the work piece. This is a fully integrated axis, allowing simultaneous and coordinated motion with all other axes. Whether you're cutting timing screws, cable winding drums, turbine impellers, or simply engraving on cylinders, our 4th axis options are just the ticket.
Includes: Motorized rotary table, mounting hardware, axis driver, wiring, and connection port.
|
|
- Includes stepper motor
- Includes tailstock
- Includes adapter to mount a 3" lathe chuck
- Includes hold down clamps to mount the rotary table on the mill table
|
|
- Syclone 4610 Air Compressor
|
|
- 10 position Tool Tray
- Slide activation via double acting pneumatic cylinder with cushion
- Integrated touch-off routine (requires electronic tool setter)
- Requires power drawbar.
|
|
|
- 10 position Tool Tray
- Slide activation via double acting pneumatic cylinder with cushion
- Integrated touch-off routine (requires electronic tool setter)
- Requires power drawbar.
|
|
- One Video Extension Cable, SVGA
- Two USB Extension Cables 10'
- One USB Bulkhead Port Assembly
|
|
- Two USB extension cables
- One video extension cable, SVGA
|
|
- Dual Core Atom processor
- 60 GB solid state drive
- 2 GB Memory
- 19" Flat screen monitor
- Keyboard & Mouse
|
|
This flood coolant kit is highly recommended for general metal cutting. The kit includes a coolant reservoir tank, pump, hose, and necessary fittings and mounting brackets. It also includes a backsplash surround and chip guard. Shown with the PCNC 770 mill and stand (not included)
|
|
- Kool Mist part number PML-12
|
|
- For 3501 and KX1 CNC mill
- 3/8"-16 drawbar thread
- For 2MT spindle
- 8-5/8" long when measured like a bolt
|
|
|
- For 3501 and KX1 CNC mill
- M10 x 1.5 mm drawbar thread
- For 2MT spindle
- 8-5/8" long when measured like a bolt
|
|
The Jog/Shuttle controller is a self contained unit that can be used hand-held or mounted in a convenient surface of the mill. It has three sets of controls:
- A spring loaded ring
- A central jog wheel
- Five buttons
Manual machining is a breeze with full velocity and position control on all 4 axis (X, Y, Z, and A rotary). Far superior to a standard CNC positioning wheel, this USB connected electronic hand wheel has two concentric wheels controlling both position and velocity. The inner wheel operates as a standard CNC jog wheel and allows precise position control of any axis. Each click on the inner wheel will move an axis a specific distance. You can select 0.0001", 0.0010", 0.0100", or define your own increment sizes like 1/16, 1/32, or 1/64. The outer wheel is spring loaded to center and can be used to control velocity of any axis, anything from a very slow crawl to full rapids. This combination of velocity and position in one control is very handy.
This product only works with Tormach machines because the software is already installed.
|
|
- The ideal Mach3 accessory
- Fully configurable
- USB Interface
- Setup software included
- Complete jog pendent
|
|
- 0 to 2" (50 mm) diameter capacity
- Fits standard 4-way and quick change tool posts
- Includes three sets of knurls
|
|
- 0 to 2" diameter capacity
- Fits standard 4-way and quick change tool posts
- Three sets of diamond knurls
- Three sets of straight knurls
|
|
This is a pair of fine diamond high speed steel knurls.
These knurls are 3/4" diameter, 3/8" wide and have a 1/4" shaft hole.
They create 14 lines per inch.
|
|
This is a pair of coarse straight high speed steel knurls.
The knurls are 3/4" diameter, 3/8" wide and have a 1/4" shaft hole.
These knurls create 14 lines per inch.
|
|
This is a pair of fine diamond high speed steel knurls.
These knurls are 3/4" diameter, 3/8" wide and have a 1/4" shaft hole.
They create 33 lines per inch.
|
|
This is a pair of fine straight high speed steel knurls.
The knurls are 3/4" diameter, 3/8" wide and have a 1/4" shaft hole.
These knurls create 33 lines per inch.
|
|
This is a pair of fine diamond high speed steel knurls.
These knurls are 3/4" diameter, 3/8" wide and have a 1/4" shaft hole.
They create 21 lines per inch.
|
|
This is a pair of medium straight high speed steel knurls.
The knurls are 3/4" diameter, 3/8" wide and have a 1/4" shaft hole.
These knurls create 21 lines per inch.
|
|
4 jaw independent chuck with reversible jaws, 125mm (4.9”) diameter with adapter plate and mounting hardware for the Tormach 6" motorized rotary table.
|
|
- Standard VESA 75 mm or 100 mm mount
|
|
- Holds 20 Tormach Tooling System tools
|
|
This is the Parallel port cable that connects the 3501 CNC machine to the control computer.
|
|
- Includes computer, monitor, mini keyboard, keyboard cover, and mouse
- Tormach Performance Machine Controller (34119)
- Standard LCD Monitor (30615)
- Mini Keyboard (31371)
- Keyboard Cover (31384)
|
|
- Provides necessary fittings for attaching the Power Draw Bar/ATC to the Syclone 4610 Air Compressor
|
|
- For Tormach PCNC 1100 CNC Milling Machine
- Push-button drawbar operation
|
|
|
- For Tormach PCNC 770 CNC Milling Machine
- Push-button drawbar operation
|
|
The Tormach CNC Scanner turns your PCNC into a high resolution 2D optical scanner and reverse engineering system. This is a unique tool has hundreds of uses, including toolmaking, artistry, repair and restoration, precision measurement, and quality assurance, to name a few.
CNC Scanner utilizes a Mach3 plugin to take a series of photographs where the camera is automatically positioned for each photograph with CNC motion. A dimensionally scaled photomosaic is then assembled by stitching photographs together to build a larger image.
After the photomosaic is assembled, it can be opened in Tormach CNC Scan CAD, a simple 2D CAD program with basic functionality for measuring distances and tracing shapes. This information can be exported as an industry standard .DXF file to other CAD/CAM programs for further work.
CNC Scanner uses a spindle mounted adjustable focus USB microscope camera that features our Tormach Tooling System® quick change mounting system. It is also compatible with any CNC mill that utilizes Mach3 control software. Requires a spindle that is capable of holding 3/4" shank, such as R8 or MT-3
Co"plete CNC Scanner package contains all hardware and software necessary to integrate with a PCNC or other Mach3 controlled mill. Includes 1.3M USB 2.0 microscope featuring 10-50X continuous magnification AND 200X discrete magnification. Plastic shell.
Included Software: Tormach CNC ScanCAD (with hardware license key dongle), and Mach3 Plug-ins for Tormach CNC Scope and CNC Scanner Utilities.
|
|
- 20,000 RPM Spindle Kit
- Fits 3501 CNC Milling Machine
- ER-16 Spindle nose
|
|
The Deluxe Machine Stand has been designed to maximize efficiency of your PCNC 1100. Chips and coolant stay contained with its generous tray depth, back and side guarding. The table mounted guard shields in the forward direction, while the integrated coolant system keeps you running at maximum speeds and feeds. Shown with the PCNC 1100 mill (not included).
|
|
The PCNC 770 stand is a welded steel base designed to support the weight of the PCNC 770 without compromising portability – a pallet jack can be easily positioned underneath the base when the mill needs to be moved. Includes generous left and right side chip trays with leak resistant drip channeling, leveling feet, and storage compartments for both tools and control computer. Shown with the PCNC 770 mill (not included).
|
|
- Convert many conventional tools into Tormach Quick Change tools
- Works with most tools with a 3/4" straight shank and a shoulder wider than 3/4"
- Use for face mill, fly cutters and boring heads
- Press Fit on .750" shaft, No adhesive required
- Groove Geometry is compatible with Tormach ATC
|
|
- 3” Toolmakers Screwless Vise and 10 Pairs of 3” long thin parallels
- Precision 1-2-3 Blocks and 36-piece Clamping Kit – 8mm T-Slot
- Two 6-piece end mill sets, 2 & 4 flute and 5 Center Drills
- Four 2MT End Mill Holders
- Combination Edge and Center Finder
|
|
- Lock down type
- Compact size allows multiple vises on CNC mill table
- Flatness of all sides within 0.001"
- Mount upright, or on left or right sides
- Sides parallel within 0.0005" in 4"
|
|
|
- Lock down type
- Compact size allows multiple vises on CNC mill table
- Flatness of all sides within 0.001"
- Mount upright, or on left or right sides
- Sides parallel within 0.0005" in 4"
|
|
- Lock down type
- Compact size allows multiple vises on CNC mill table
- Flatness of all sides within 0.001"
- Mount upright, or on left or right sides
- Sides parallel within 0.0005" in 4"
|
