Lathes and Milling Machines

Lathes and Milling Machines - LittleMachineShop.com

LittleMachineShop.com has lathes and milling machines for benchtop machinists. The LittleMachineShop.com HiTorque machines are the best in their class. they has the most power and the most torque than other machines in their class. The brushless DC spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 RPM to 2500 RPM continuously. There are no gears to shift. And, with no gears in the spidle drive, the HiTorque machines are the quietest in their class. The HiTorque Mini Mills feature a larger X-Y table than other mini mills, along with an R8 spindle. Our HiTorque Lathes can make every American Standard thread from 4 to 80 TPI, and every American Standard Metric thread from 0.3 to 8 mm.

3990 HiTorque 3990 Mini Mill

Most powerful mini mill machine in its class
Most low-speed torque in its class
No gears in spindle drive
Largest table and X-Y travel in its class
R8 spindle and drill chuck

The LittleMachineShop.com HiTorque Mini Mill is the best in its class. It has the most power, the most torque, and a larger table than other mills in its class. This mill has a solid column. It does not tilt from side to side. This construction is significantly stiffer than the tilting column on other mini mills. This model also includes the air spring head support for even support through the Z-axis range of travel. The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 rpm to 2500 RPM continuously. There are no gears to shift. And, with no gears, the HiTorque Mini Mill machine is the quietest in its class. The large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The resettable feed dials allow you to zero them at any point. The HiTorque Mini Mill has drill press handles for drilling and fast motion of the mill's head. It also has Z-axis fine feed with 0.001" resolution for milling operations. This machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag; no solvents necessary. *NOTE* We ship machines only to the US and Canada.

4981 HiTorque 3990 Mini Mill, Tooling Package and Stand Cabinet

All the essentials for a mini mill setup
Save hundreds of dollars with bundled pricing and shipping
Includes solid column mill with a pre-installed airspring kit
Includes standard tooling package
Includes stand cabinet and drip tray

HiTorque Solid Column Mini Mill, Tooling Package, and Stand. This includes the PN 3990 HiTorque Mini Mill, the PN 3489 R8 Mini Mill Tooling Package, and 5629 Stand. The LittleMachineShop.com HiTorque Mini Mill is the best in its class. It has the most power, most torque, and a larger table than other mills in its class. This mill has a solid column. It does not tilt from side to side. This construction is significantly stiffer than the tilting column on other mini mills. The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 rpm to 2500 rpm continuously. There are no gears to shift. And, with no gears, the HiTorque Mini Mill is the quietest in its class. The large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The re-settable feed dials allow you to zero them at any point. The HiTorque Mini Mill has drill press handles for drilling and fast motion of the mill's head. It also has Z-axis fine feed with 0.001" resolution for milling operations. The 3489 tooling package comes equipped with 1-2-3 blocks, center drills, clamping kit, 7 piece R8 collet set, edge & center finder, 20 piece end mill set, 3" thin parallels, 3" milling vise, vise mounting kit and a 7/16" T-slot cleaner. The 5629 stand cabinet is sourced from the same factory as the mini mill so the drip tray has pre-drilled holes for mounting the mill. It also has cutouts on the base for securing the cabinet to a shop floor. The cabinet itself is ideal for storage of tools and accessories. *NOTE* We ship machines only to the US and Canada.

4190 HiTorque 4190 Deluxe Mini Mill

Factory installed 3-axis DRO and interlocked spindle lock
Most powerful mill in its class with the most low speed torque
No gears in spindle drive
Largest table and X-Y travel in its class
R8 spindle and drill chuck

The Model 4190 Deluxe HiTorque Mini Mill has all the features of our popular Model 3990 HiTorque Mini Mill, plus: - 3-axis digital readout (DRO) with Bluetooth and 7" tablet display. The DRO is completely installed on the mill. - Electrically interlocked spindle lock disables power to the motor when engaged. - Machined aluminum handwheels and color keyed drill handles. The LittleMachineShop.com HiTorque Mini Mill for sale is the best in its class. It has the most power, the most torque, and a larger table than other mills in its class. This mini milling machine has a solid column. It does not tilt from side to side. This construction is significantly stiffer than the tilting column on other mini mills. This model also includes the air spring head support for even support through the Z-axis range of travel. The models 4190 & 6450 mini mills come equipped with an electrically interlocked spindle lock. This mechanism makes tool changes easier, faster and safer. When engaged, the plunger automatically drops into the locking hole as the spindle is rotated. An electromagnetic interlock disables power to the motor, locking the spindle. The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 rpm to 2500 rpm continuously. There are no gears to shift. And, with no gears, the HiTorque Mini Mill is the quietest in its class. The large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The resettable feed dials allow you to zero them at any point. The HiTorque mini milling machine for sale has drill press handles for drilling and fast motion of the mill's head. It also has Z-axis fine feed with 0.001" resolution for milling operations. This machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag; no solvents necessary. *NOTE* We ship machines only to the US and Canada.

6542 HiTorque 4190 Deluxe Mini Mill, Tooling Package, and Stand Cabinet

All the essentials for a mini mill setup
Save hundreds of dollars with bundled pricing and shipping
Includes deluxe mini mill with factory DRO
Includes standard tooling package
Includes stand cabinet and drip tray

This package includes the 4190 HiTorque Deluxe Mini Mill, the 3489 R8 Mini Mill Tooling Package, and 5629 Stand cabinet. The mill in this package is the HiTorque model 4190 Deluxe Mini Mill. The mill has the standard HiTorque features including solid column, brushless motor and NSK branded bearings. In addition, this mills has: - 3-axis digital readout (DRO) with Bluetooth and 7" tablet display. The DRO is completely installed on the mill. - Electrically interlocked spindle lock disables power to the motor when engaged. - Machined aluminum handwheels and color keyed drill handles. The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 rpm to 2500 rpm continuously. There are no gears to shift. And, with no gears, the HiTorque Mini Mill is quieter than other mills in its class. The large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The re-settable feed dials allow you to zero them at any point. The mill is equipped with drill press handles for drilling and fast motion of the mill's head. It also has Z-axis fine feed with 0.001" resolution for milling operations. This machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag; no solvents necessary. The tooling package has all the essentials for basic mini mill operations and is bundled to work with the 4190 R8 mini mill. The stand cabinet is sourced from the same factory as the mini mill so the drip tray has pre-drilled holes for mounting the mill. It also has cutouts on the base for securing the cabinet to a shop floor. The cabinet itself is ideal for storage of tools and accessories. *NOTE* We ship machines only to the US and Canada.

5100 HiTorque 5100 Mini Lathe - 7x16

Extended bed (16" between centers) provides more working room
Most powerful and most low-speed torque in its class. No gears in spindle drive
4" 3-jaw lathe chuck
Cam lock tailstock
CHUCK GUARD HAS NOW BEEN REMOVED

The LittleMachineShop.com HiTorque 7x16 Mini Lathe is the best in its class. It has the most power, most torque, and a longer center distance than other lathes in its class. The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 rpm to 2500 rpm continuously in both directions. There are no gears to shift. The cross feed and compound rest dials are graduated in 0.001" and 0.025 mm. A 4" 3-jaw lathe chuck is included, and the lathe is equipped with a 4-way indexing tool post set for 5/16" (8 mm) tools. Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.35 to 8 mm pitch with the extra 21 tooth change gear that is included. Cutting inch threads is made even easier with the factory-installed threading dial. This HiTorque 7x16 Mini Lathe for sale includes a chip tray, a backsplash guard, and spreaders to give the feet a broader stance. This machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag--no solvents necessary. The LittleMachineShop.com model 5100 HiTorque Mini Lathe is a version of the SIEG SC2. *NOTE* We ship machines only to the US and Canada.

4800 HiTorque 5100 Mini Lathe - 7x16, Tooling Package, and Stand Cabinet

All the essentials for a mini lathe setup
Save hundreds of dollars with bundled pricing and shipping
Includes standard tooling package
Includes stand cabinet and drip tray

HiTorque Mini Lathe, Tooling Package, and Stand. This includes the PN 5100 HiTorque Mini Lathe, the 5207 tooling package and the 5626 stand. The LittleMachineShop.com HiTorque Mini Lathe is the best in its class. It has the most power, most torque, and a longer center distance than other lathes in its class. The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 rpm to 2500 rpm continuously in both directions. There are no gears to shift. The cross feed and compound rest dials are graduated in 0.001" and 0.025 mm. Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.3 to 8 mm pitch with the extra 21 tooth change gear that is included. The lathe includes a chip tray, a backsplash guard, and spreaders to give the feet a broader stance. The LittleMachineShop.com model 5100 HiTorque Mini Lathe is a version of the SIEG SC2. The Premium Tooling Package includes a high-quality all-steel wedge-style quick change tool post set with five tool holders, a 1/2" professional-grade drill chuck on a 2 Morse taper shank, American-made indexable turning tools, an indexable boring bar, a premium cut-off blade, and center drills. *NOTE* We ship machines only to the US and Canada.

6450 HiTorque 6450 Deluxe LED Mini Mill

All the Features of the HiTorque 3990 (brushless motor, gearless spindle drive, solid column, etc.)
LED display with illuminated controls and integrated spindle speed readout
3-axis Bluetooth DRO w/tablet on X, Y, and Z-axis
Largest table and X-Y travel in its class
Aluminum hand wheels and drill press handles

The LittleMachineShop.com HiTorque 6450 Mini Mill is the best in its class. It has the most power, the most torque, the most features and upgrades, and the largest table in its class. It is also proof that all mills are not the same. Most noticeable is the LED mirror display which clearly and elegantly organizes the key controls for the mill. The panel features a start/stop button, spindle direction button, a Z-axis fine feed knob, and a variable speed knob. The fine feed has a resolution of 0.001" for precise milling operations. The spindle speed is displayed in a large easy-to-read digital display. The 6450 mill also comes equipped with a 3-axis tablet display DRO connected via Bluetooth to magnetic scales on the table and column. The DRO system provides measures for the X, Y, and Z-axis in increments .0002" and comes factory installed on the mill. A 500 Watt brushless spindle drive motor and belt drive provides tremendous power and low-end torque. There are NO gears in the spindle drive. The drive allows for spindle speeds from 100 to 2500 RPM continuously in both directions. NSK quality spindle bearings ensure smooth and quiet operation. An electrically interlocked spindle lock ensures easy and safe operation. This mill has a solid dovetail column (it does not tilt side to side). This construction is significantly stiffer than the tilting column on other mini mills. This model also includes an air spring head support for even movement through the Z-axis range of travel. The models 4190 & 6450 mini mills come equipped with an electrically interlocked spindle lock. This mechanism makes tool changes easier, faster and safer. When engaged, the plunger automatically drops into the locking hole as the spindle is rotated. An electromagnetic interlock disables power to the motor, locking the spindle. The HiTorque Mini Mill has drill press handles for drilling and fast motion of the mill's head. The R8 spindle ensures wide tool availability. The large mill table has attractive aluminum hand wheels and provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The resettable feed dials allow you to zero them at any point. A latch handled cabinet provides easy access to control boards. *NOTE* We ship machines only to the US and Canada.

6543 HiTorque 6450 Deluxe LED Mini Mill, Tooling Package, and Stand Cabinet

All the essentials for a mini mill setup
Save hundreds of dollars with bundled pricing and shipping
Includes deluxe mini mill with factory DRO and LED display
Includes standard tooling package
Includes stand cabinet and drip tray

This package includes the 6450 HiTorque Deluxe Mini Mill with LED display, the 3489 R8 Mini Mill Tooling Package, and 5629 Stand cabinet. The mill in this package is the HiTorque model 6450. The mill has the standard HiTorque features including solid column, brushless motor and NSK branded bearings. In addition, this mills has: - 3-axis digital readout (DRO) with Bluetooth and 7" tablet display. - Electrically interlocked spindle lock. - Machined aluminum handwheels and Z-Axis drill handles. - New easy-to-read LED display with built-in spindle speed readout. The 3-axis tablet display DRO connected via Bluetooth to magnetic scales on the table and column. The DRO system provides measures for the X, Y, and Z-axis in increments .0002" and comes factory installed on the mill. The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 rpm to 2500 rpm continuously. There are no gears to shift. And, with no gears, the HiTorque Mini Mill is quieter than other mills in its class. NSK brand spindle bearings ensure smooth and quiet operation. An electrically interlocked spindle lock ensures easy and safe operation. This mechanism makes tool changes easier, faster and safer. When engaged, the plunger automatically drops into the locking hole as the spindle is rotated. An electromagnetic interlock disables power to the motor, locking the spindle. The large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The re-settable feed dials allow you to zero them at any point. This mill has a solid dovetail column (it does not tilt side to side). This construction is significantly stiffer than the tilting column on other mini mills. This model also includes an air spring head support for even movement through the Z-axis range of travel. The drill press handles are for drilling and fast motion of the mill's head. It also has Z-axis fine feed with 0.001" resolution for milling operations. This machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag; no solvents necessary. The tooling package has all the essentials for basic mini mill operations and is bundled to work with the 6450 R8 mini mill. The stand cabinet is sourced from the same factory as the mini mill so the drip tray has pre-drilled holes for mounting the mill. It also has cutouts on the base for securing the cabinet to a shop floor. The cabinet itself is ideal for storage of tools and accessories. *NOTE* We ship machines only to the US and Canada.

6500 HiTorque 6500 Bench Mill

750 watt (1 hp) brushless motor/gearless spindle
Clear and precise spindle controls
Large X-Y table 27.5" x 6.25"
True quill and drill press-style handles
Tapping mode for reversing taps out

The LittleMachineShop.com HITorque Bench Mill 6500 provides a larger table, more travel, more horsepower, and more rigidity than other brand mills in its size class. The 6500 is a middleweight in our mill lineup. A significant step up in size, rigidity, and power compared to a mini mill. Weighing in at a little over 250 lbs., these mills can be placed on a bench with the help of some friends and their base dimensions of 9.1" x 16.1" will fit on most benches. A 750 Watt (1 hp) brushless DC motor provides abundant spindle power and tremendous low-end torque. The drive allows for spindle speeds from 100 to 2500 RPM continuously in both forward and reverse. A belt drive from motor to spindle eliminates any failure from gears breaking. NSK quality spindle bearings ensure years of quiet operation. The combination of a large table (27.5" x 6.25") and extensive travel along X, Y, Z-axis (19.7", 5.7", 11.6") provides a large work envelope. Precision ground ways ensure smooth and accurate movement. Adjustable gibs are on all dovetail ways. A fine feed knob on the Z-axis provides for precise control. The mill has an R8 spindle for wide tool availability. A true quill and drill press-style handles make for easy drilling. Tapping-mode is another standard feature with a button on the end of each handle allowing you to reverse the spindle to make tapping easy. The mill has a solid (No-Tilt) head and rigid rectangular dovetail column which maintains head alignment (tram) at any height, ensuring years of rigid and "true" milling. A digital spindle speed display and a separate digital depth gauge for the quill which reads in inches and mm. You can automatically resume running at the last-used spindle speed. Spindle fine feed and position lock are also standard. Large handwheels on the X and Y axes and 10 TPI lead screws (accurate to 0.001") provide accurate readings. Ball thrust bearings on feed screws ensure smooth movement. At LittleMachineShop.com, we stand behind every machine we sell! If it’s not right, we’ll make it right and we have the in-house technicians and replacement parts in our U.S. warehouse to back it up. *This mill is a version of the SIEG SX2.7 built to LittleMachineShop.com specifications. *NOTE* We ship machines only to the US and Canada.

6465 HiTorque 6500 Bench Mill, Tooling Package, and Stand Cabinet

All the essentials for a bench mill setup
Save hundreds of dollars with bundled pricing and shipping
Includes bench mill with large table and tapping mode
Includes standard tooling package
Includes stand cabinet and drip tray

HiTorque Bench Mill, Tooling Package, and Stand. This includes the PN 6500 HiTorque Bench Mill, the PN 3526 Bench Mill Tooling Package, and 5634 Stand. The model 6500 bench top mill provides a larger table, more travel, more horsepower, and more rigidity than other brand mills in its size class. A 750 Watt (1 hp) brushless DC motor provides abundant spindle power and tremendous low-end torque. The drive allows for spindle speeds from 100 to 2500 RPM continuously in both forward and reverse. A belt drive from motor to spindle eliminates any failure from gears breaking. NSK quality spindle bearings ensure years of quiet operation. The combination of a large table (23.4" x 5.5") and extensive travel along X, Y, Z-axis (15.6", 6.7", 11.6") provides a large work envelope. Precision ground ways ensure smooth and accurate movement. Adjustable gibs are on all dovetail ways. A fine feed knob on the Z-axis provides for precise control. The mill has an R8 spindle for wide tool availability. A true quill and drill press-style handles make for easy drilling. Tapping-mode is another standard feature with a button on the end of each handle allowing you to reverse the spindle to make tapping easy. A digital spindle speed display and a separate digital depth gauge for the quill which reads in inches and mm. You can automatically resume running at the last-used spindle speed. Spindle fine feed and position lock are also standard. Large anodized handwheels on the X and Y axes and 10 TPI lead screws (accurate to 0.001") provide accurate readings. Ball thrust bearings on feed screws ensure smooth movement. At LittleMachineShop.com, we stand behind every machine we sell! If it’s not right, we’ll make it right and we have the in-house technicians and replacement parts in our U.S. warehouse to back it up. This mill is a version of the SIEG SX2.7 built to LittleMachineShop.com specifications. *NOTE* We ship machines only to the US and Canada.

6570 HiTorque 6570 Deluxe Bench Mill

Factory installed 3-axis DRO with hard wired display
750 watt (1 hp) brushless DC variable speed drive
Tapping mode for reversing taps out
Large X-Y table 27.5" x 6.25"
Aluminum hand wheels and drill press handles

The LittleMachineShop.com HiTorque 6570 Bench Mill is a version of the SIEG SX2.7 built to LittleMachineShop.com specifications. The model 6570 bench top mill provides a larger table, more travel, more horsepower, and more rigidity than other brand mills in its size class. It is the deluxe middleweight in our mill lineup. A significant step up in size, and power compared to a mini mill. Weighing in at just over 250 lbs. and a base dimension of 9.1" x 16.1", this mill can be placed on a bench with the help of some friends. Most noticeable is the LED mirror display which clearly and elegantly organizes the key controls for the mill. The panel features a start/stop button, spindle direction button, Tapping mode button, a variable speed knob, and a Z-axis fine feed knob. The fine feed has a resolution of 0.001" for precise milling operations. The spindle speed is displayed in a large easy-to-read digital display. A 750 Watt (1 hp) brushless DC motor provides abundant spindle power and tremendous low-end torque. The drive allows for spindle speeds from 100 to 2000 RPM continuously in both forward and reverse. A belt drive from motor to spindle eliminates any failure from gears breaking. High quality NSK brand tapered roller spindle bearings ensure years of quiet operation. The combination of a large table (27.6" x 6.3") and extensive travel along X, Y, Z-axis (19.7", 5.5", 11.6") provides a large work envelope. Precision ground ways ensure smooth and accurate movement. Adjustable tapered gibs are on all dovetail ways. The mill has an R8 spindle for wide tool availability. An Electrically interlocked spindle lock for easy, safe tool changes is added to this machine. A true quill and drill press-style handles make for easy drilling. A separate digital depth gauge for the quill which reads in inches and mm and fine feed knob and position lock on the Z-axis provides for precise milling control. Tapping-mode allows you to reverse the spindle with a push of a button on the z-axis handles, making tapping easy. The mill has a solid (No-Tilt) head and rigid rectangular dovetail column which maintains head alignment (tram) at any height, ensuring years of rigid and "true" milling. Large handwheels on the X and Y axes and 10 TPI lead screws (accurate to 0.001") provide accurate readings. Ball thrust bearings on feed screws ensure smooth movement. On the deluxe version of this machine, Machined aluminum handwheels finish the professional look. A factory installed, hard wired 3-axis DRO with easy-to-read display. Magnetic scales are mounted on the table and column. The DRO system provides accurate measurement for the X, Y, and Z axis in increments 0.0002". At LittleMachineShop.com, we stand behind every machine we sell! If it’s not right, we’ll make it right and we have the in-house technicians and replacement parts in our U.S. warehouse to back it up. *This mill is a version of the SIEG SX2.7 built to LittleMachineShop.com specifications. *NOTE* We ship machines only to the US and Canada.

6466 HiTorque 6570 Deluxe Bench Mill, Tooling Package and Stand Cabinet

All the essentials for a bench mill setup
Save hundreds of dollars with bundled pricing and shipping
Includes bench mill with LED display, tapping mode, and DRO
Includes standard tooling package
Includes stand cabinet and drip tray

HiTorque Deluxe Bench Mill, tooling package, and stand cabinet. This includes the 6570 HiTorque Deluxe Long Table Bench Mill, the 3526 Bench Mill Tooling Package, and 5634 Stand. The LittleMachineShop.com HiTorque Deluxe Bench Mill 6570 is the deluxe middleweight in our mill lineup. A significant step up in size, rigidity, and power compared to a mini mill, it is approximately 100 lbs. lighter than our large bench mills. Weighing in at 245 lbs., this mill can be placed on a bench with the help of some friends and its base dimensions of 9.1" x 16.1" will fit on most benches. The deluxe features added to this HiTorque bench mill include: - Factory installed, hard wired 3-axis DRO with easy to read display. Magnetic scales are mounted on the table and column. The DRO system provides accurate measurement for the X, Y, and Z axis in increments 0.0002". - Electrically interlocked spindle lock for easy, safe tool changes - Machined aluminum handwheels Like our other HiTorque bench mill, the model 6550 has the following standard features: A 750 Watt (1 hp) brushless DC motor provides abundant spindle power and tremendous low-end torque. The drive allows for spindle speeds from 100 to 2000 RPM continuously in both forward and reverse. A belt drive from motor to spindle eliminates any failure from gears breaking. NSK quality spindle bearings ensure years of quiet operation. The combination of a large table (27.6" x 6.3") and extensive travel along X, Y, Z-axis (19.7", 5.5", 11.6") provides a large work envelope. Precision ground ways ensure smooth and accurate movement. Adjustable gibs are on all dovetail ways. A fine feed knob on the Z-axis provides for precise control. The mill has an R8 spindle for wide tool availability. A true quill and drill press-style handles make for easy drilling. Tapping-mode is another standard feature with a button on the end of each handle allowing you to reverse the spindle to make tapping easy. A digital spindle speed display and a separate digital depth gauge for the quill which reads in inches and mm. You can automatically resume running at the last-used spindle speed. Spindle fine feed and position lock are also standard. Large anodized handwheels on the X and Y axes and 10 TPI lead screws (accurate to 0.001") provide accurate readings. Ball thrust bearings on feed screws ensure smooth movement. At LittleMachineShop.com, we stand behind every machine we sell! If it’s not right, we’ll make it right and we have the in-house technicians and replacement parts in our U.S. warehouse to back it up. This mill is a version of the SIEG SX2.7 built to LittleMachineShop.com specifications. *NOTE* We ship machines only to the US and Canada.

6770 HiTorque 6770 Deluxe Large Bench Mill

1000 watt (1-1/3 hp) brushless DC variable speed drive
Electrically interlocked spindle lock
Factory installed 3-axis DRO with hard wired display
Power head lift system
Tapping mode for reversing taps out

The LittleMachineShop.com HiTorque Large Bench Mill 6770 is our largest mill. It is a significant step up in size, rigidity, and power compared to a mini mill, or even our other bench mills. This bench top mill provides a larger table, more travel, more horsepower, and more rigidity. Compare our standard features and specs to others in this size and price range. A 1000 Watt (1-1/3 hp) brushless DC motor provides abundant spindle power and tremendous low-end torque. NSK brand Japanese-quality spindle bearings ensure years of quiet operation. A belt drive from motor to spindle eliminates any failure from gears breaking. A simple belt change switches between low range and high range, giving you continuously variable spindle speeds from 80-5000 rpm. A factory installed, hard wired 3-axis DRO with easy to read display. Magnetic scales are mounted on the table and column. The DRO system provides accurate measurement for the X, Y, and Z axis in increments 0.0002". The combination of a large table (29.1" x 7.1") and extensive travel along all axis (XYZ: 20.2", 8.5", 11.8") provides a large work envelope. Precision ground ways ensure smooth and accurate movement. Adjustable gibs are on all dovetail ways. Fine feed on Z-axis for precise control. The mill has a solid (No-Tilt) head and rigid rectangular dovetail column which maintains head alignment (tram) at any height, ensuring years of rigid and "true" milling. Power head lift to raise or lower the mill head with the touch of a button. A handy magnetic "toolbox" on the side of the column provides a convenient place for the spindle wrench and drawbar wrench. The mill has an R8 spindle for wide tool availability. A true quill and drill press-style handles make for easy drilling. Tapping-mode is another standard feature with a button on the end of each handle allowing you to reverse the spindle to make tapping easy. Electrically interlocked spindle lock for easy, safe tool changes Standard features include a digital spindle speed display and a separate DRO for the quill which reads in inches and mm. You can automatically resume running at the last-used spindle speed. Spindle fine feed and position lock are also standard. Large anodized handwheels on the X and Y axes and 10 TPI lead screws (Accurate to .001″) provide better accuracy readings than metric conversions. Ball thrust bearings on feed screws and split nuts on X and Y axes minimize backlash and ensure much smoother movements and less backlash. We stand behind every machine we sell. If it’s not right, we’ll make it right and we have the in-house technicians and replacement parts in our U.S. warehouse to back it up. *This mill is a version of the SIEG SX3.5 built to LittleMachineShop.com specifications. **WARNING: At over 350 pounds, you and your buddies can't lift this onto your bench. You will need an engine hoist, forklift, or other mechanical assist to move this machine. *NOTE* We ship machines only to the US and Canada.

6472 HiTorque 6770 Deluxe Large Bench Mill, Tooling Package and Stand Cabinet

All the essentials for a bench mill setup
Save hundreds of dollars with bundled pricing and shipping
Includes deluxe large bench mill with LED display and DRO
Includes standard tooling package
Includes stand cabinet and drip tray

HiTorque Large Deluxe Bench Mill, Tooling Package, and Stand. This includes the PN 6770 HiTorque Large Deluxe Bench Mill, the PN 5534 Large Bench Mill Tooling Package, and 5989 Stand. The LittleMachineShop.com HiTorque Large Bench Mill 6770 is our largest mill. It is a significant step up in size, rigidity, and power compared to a mini mill, or even our other bench mills. This bench top mill provides a larger table, more travel, more horsepower, and more rigidity. Compare our standard features and specs to others in this size and price range. The LittleMachineShop.com model 6770 HiTorque Deluxe Large Bench Mill has all the features of the model 6700 HiTorque Large Bench Mill, plus: - Factory installed, hard wired 3-axis DRO with easy to read display. Magnetic scales are mounted on the table and column. The DRO system provides accurate measurement for the X, Y, and Z axis in increments 0.0002". * Electrically interlocked spindle lock for easy, safe tool changes * Power head lift to raise or lower the mill head with the touch of a button Standard features include: A 1000 Watt (1-1/3 hp) brushless DC motor provides abundant spindle power and tremendous low-end torque. NSK brand Japanese-quality spindle bearings ensure years of quiet operation. A belt drive from motor to spindle eliminates any failure from gears breaking. A simple belt change switches between low range and high range, giving you continuously variable spindle speeds from 80-5000 rpm. The combination of a large table (29.1" x 7.1") and extensive travel along all axis (XYZ: 20.2", 8.5", 11.8") provides a large work envelope. Precision ground ways ensure smooth and accurate movement. Adjustable gibs are on all dovetail ways. Fine feed on Z-axis for precise control. The mill has a solid head and rectangular dovetail column which maintains head alignment at any height, ensuring years of rigid and "true" milling. A handy magnetic "toolbox" on the side of the column provides a convenient place for the spindle wrench and drawbar wrench. The mill has an R8 spindle for wide tool availability. A true quill and drill press-style handles make for easy drilling. Tapping-mode is another standard feature with a button on the end of each handle allowing you to reverse the spindle to make tapping easy. Standard features include a digital spindle speed display and a separate DRO for the quill which reads in inches and mm. You can automatically resume running at the last-used spindle speed. Spindle fine feed and position lock are also standard. Large anodized handwheels on the X and Y axes and 10 TPI lead screws (Accurate to .001″) provide better accuracy readings than metric conversions. Ball thrust bearings on feed screws and split nuts on X and Y axes minimize backlash and ensure much smoother movements and less backlash. We stand behind every machine we sell. If it’s not right, we’ll make it right and we have the in-house technicians and replacement parts in our U.S. warehouse to back it up. *This mill is a version of the SIEG SX3.5 built to LittleMachineShop.com specifications. **WARNING: At over 350 pounds, you and your buddies can't lift this onto your bench. You will need an engine hoist, forklift, or other mechanical assist to move this machine. *NOTE* We ship machines only to the US and Canada.

7350 HiTorque 7350 Deluxe Mini Lathe - 7x16

Features of 5100 (most powerful, most low-speed torque, gearless spindle, cam-lock TS, 4" chuck)
Includes DRO readouts on compound rest, cross slide, and tailstock
Metal hand wheels and chrome levers
Includes 0XA wedge-type quick change tool post and five tool holders
CHUCK GUARD HAS NOW BEEN REMOVED

The LittleMachineShop.com HiTorque Mini Lathe is the best in its class. It has the most power, most torque, and a longer center distance than other lathes in its class. This lathe comes equipped with digital readouts on the cross slide, compound rest, and tailstock quill. The attractive hand wheels are all metal, and the levers are chrome. The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 RPM to 2500 rpm continuously in both directions. There are no gears to shift. The all steel, wedge-type quick change tool posts accepts turning tools up to 1/2" shank. It comes with five toolholders (for details, see part number 3112). Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.35 to 8 mm pitch with the extra 21 tooth change gear that is included. Cutting inch threads is made even easier with the factory-installed threading dial. The 7x16 lathe includes a chip tray, a backsplash guard, and spreaders to give the feet a broader stance. This machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag; no solvents necessary. The LittleMachineShop.com model 7350 HiTorque Mini Lathe is a version of the SIEG SC2. *NOTE* We ship machines only to the US and Canada.

6541 HiTorque 7350 Deluxe Mini Lathe - 7x16, Tooling Package, and Stand Cabinet

All the essentials for a mini lathe setup
Save hundreds of dollars with bundled pricing and shipping
Includes the newest HiTorque mini lathe with upgraded features
Includes standard tooling package
Includes stand cabinet and drip tray

HiTorque Deluxe Mini Lathe with LED display, tooling package, and stand cabinet. This package includes the newest HiTorque mini lathe, model 7350, the 5124 tooling package and the 5626 stand cabinet. The 7350 Deluxe mini lathe comes equipped with digital readouts on the cross slide, compound rest, and tailstock quill. The attractive hand wheels are all metal, and the levers are chrome. A 500-Watt brushless spindle drive motor and belt drive provides tremendous power and low-end torque. There are NO gears to shift, so no gears to break. The drive allows for spindle speeds from 100 to 2500 RPM continuously in both directions. NSK brand Japanese-quality spindle bearings ensure smooth and quiet operation. Standard on the lathe is an all steel, wedge-type quick change tool post which accepts turning tools up to 1/2" shank. Five toolholders are also included for the most common tools and tasks. The lathe also comes with a 4" Sanou lathe chuck, a Morse taper #2 dead center for the tailstock, and an 11-gear change gear set that includes a 21-tooth gear for accurate metric threading. For more details, see the Contents tab. Real top and bottom half-nuts with a 16 TPI lead screw and a factory-installed threading dial provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.3 to 8 mm pitch with the extra 21 tooth change gear that is included. The 7x16 lathe includes attractive aluminum hand wheels and chrome levers. A backsplash guard and deluxe chip tray with rubber feet give a broader and more secure stance. The 5124 tooling package comes equipped with a 2MT short arbor for the tailstock, a boring bar set, center drills, cut-off blade, 1/2" drill chuck and a set of turning tools with indexable inserts. The 5626 stand cabinet comes from the lathe manufacturer and the chip tray has pre-drilled mounting holes that fit the footprint of the mini lathe. it is a single column design with a cabinet for storage. HiTorque Mini Lathe, Tooling Package, and Stand. This includes the PN 5100 HiTorque Mini Lathe, the 5207 tooling package and the 5626 stand. The LittleMachineShop.com HiTorque Mini Lathe is the best in its class. It has the most power, most torque, and a longer center distance than other lathes in its class. The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 rpm to 2500 rpm continuously in both directions. There are no gears to shift. The cross feed and compound rest dials are graduated in 0.001" and 0.025 mm. Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.3 to 8 mm pitch with the extra 21 tooth change gear that is included. The lathe includes a chip tray, a backsplash guard, and spreaders to give the feet a broader stance. The LittleMachineShop.com model 5100 HiTorque Mini Lathe is a version of the SIEG SC2. The Premium Tooling Package includes a high-quality all-steel wedge-style quick change tool post set with five tool holders, a 1/2" professional-grade drill chuck on a 2 Morse taper shank, American-made indexable turning tools, an indexable boring bar, a premium cut-off blade, and center drills. *NOTE* We ship machines only to the US and Canada.

7450 HiTorque 7450 Deluxe Mini Lathe - 7x16, LED Display

All the Features of the HiTorque 5100 (brushless motor, gearless spindle drive, extended bed, etc.)
LED display with illuminated controls and integrated spindle speed readout
2-Axis Bluetooth DRO (w/tablet) on ways and cross feed, DRO readouts on tailstock and compound
Aluminum hand wheels and chrome levers
0XA wedge-type quick change tool post and five tool holders

The LittleMachineShop.com HiTorque 7450 Mini Lathe is the best in its class. It has the most power, the most torque, the most features and upgrades, and the longest bed in its class. It is also proof that all lathes are not the same. Most noticeable is the LED mirror display which clearly and elegantly organizes the key controls for the lathe. All controls are Illuminated, and it includes a start/stop button, a spindle direction button and emergency power (E-stop) switch. A variable speed control knob allows accurate control of spindle speeds, while an integrated spindle speed display clearly displays the speed. The 7450 lathe also comes equipped with a 2-axis tablet display DRO connected via Bluetooth to magnetic scales on the longitudinal and cross feeds. It also has 2 digital readouts on the compound rest and tailstock. The DRO system measures in increments .0002" and comes factory installed on the lathe. A 500-Watt brushless spindle drive motor and belt drive provides tremendous power and low-end torque. There are NO gears to shift, so no gears to break. The drive allows for spindle speeds from 100 to 2500 RPM continuously in both directions. NSK brand Japanese-quality spindle bearings ensure smooth and quiet operation. Standard on the lathe is an all steel, wedge-type quick change tool post which accepts turning tools up to 1/2" shank. Five toolholders are also included for the most common tools and tasks. The lathe also comes with a 4" Sanou lathe chuck, a Morse taper #2 dead center for the tailstock, and an 11-gear change gear set that includes a 21-tooth gear for accurate metric threading. For more details, see the Contents tab. Real top and bottom half-nuts with a 16 TPI lead screw and a factory-installed threading dial provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.3 to 8 mm pitch with the extra 21 tooth change gear that is included. The 7x16 lathe includes attractive aluminum hand wheels and chrome levers. A backsplash guard and deluxe chip tray with rubber feet give a broader and more secure stance. The LittleMachineShop.com model 7450 HiTorque Mini Lathe is a version of the SIEG SC2. *NOTE* We ship machines only to the US and Canada.

6512 HiTorque 7450 Deluxe Mini Lathe - 7x16, Tooling Package, and Stand Cabinet

All the essentials for a mini lathe setup
Save hundreds of dollars with bundled pricing and shipping
Includes the HiTorque deluxe mini lathe with upgraded features
Includes standard tooling package
Includes stand cabinet and drip tray

HiTorque Deluxe Mini Lathe with LED display, tooling package, and stand cabinet. This package includes the newest HiTorque mini lathe, model 7450, the 5124 tooling package and the 5626 stand cabinet. The 7450 Deluxe mini lathe is has an LED mirror display which clearly and elegantly organizes the key controls for the lathe. All controls are Illuminated, and it includes a start/stop button, a spindle direction button and emergency power (E-stop) switch. A variable speed control knob allows accurate control of spindle speeds, while an integrated spindle speed display clearly displays the speed. The 7450 lathe also comes equipped with a 2-axis tablet display DRO connected via Bluetooth to magnetic scales on the longitudinal and cross feeds. It also has 2 digital readouts on the compound rest and tailstock. The DRO system measures in increments .0002" and comes factory installed on the lathe. A 500-Watt brushless spindle drive motor and belt drive provides tremendous power and low-end torque. There are NO gears to shift, so no gears to break. The drive allows for spindle speeds from 100 to 2500 RPM continuously in both directions. NSK brand Japanese-quality spindle bearings ensure smooth and quiet operation. Standard on the lathe is an all steel, wedge-type quick change tool post which accepts turning tools up to 1/2" shank. Five toolholders are also included for the most common tools and tasks. The lathe also comes with a 4" Sanou lathe chuck, a Morse taper #2 dead center for the tailstock, and an 11-gear change gear set that includes a 21-tooth gear for accurate metric threading. For more details, see the Contents tab. Real top and bottom half-nuts with a 16 TPI lead screw and a factory-installed threading dial provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.3 to 8 mm pitch with the extra 21 tooth change gear that is included. The 7x16 lathe includes attractive aluminum hand wheels and chrome levers. A backsplash guard and deluxe chip tray with rubber feet give a broader and more secure stance. The 5124 tooling package comes equipped with a 2MT short arbor for the tailstock, a boring bar set, center drills, cut-off blade, 1/2" drill chuck and a set of turning tools with indexable inserts. The 5626 stand cabinet comes from the lathe manufacturer and the chip tray has pre-drilled mounting holes that fit the footprint of the mini lathe. It is a single column design with a cabinet for storage. *NOTE* We ship machines only to the US and Canada.

7500 HiTorque 7500 Bench Lathe - 8.5x20

Inch dials, inch and metric threading
1000 Watt (1.34 HP) brushless DC drive with spindle speed readout
Power longitudinal feed and power cross feed
Reversible lead screw for right and left hand threads
4" (100 mm) 3-jaw self centering lathe chuck

The LittleMachineShop.com model 7500 HiTorque 8.5x20 Bench Lathe is the best in its class. No other metal lathes in this size offer power cross feed. The 1000 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 rpm to 2000 rpm continuously in both directions. There are no gears to shift. The updated control panel allows you to stop and then restart the lathe at a pre-selected speed. The cross feed and compound rest dials are graduated in 0.001" and advance 0.050" per turn. The metal lathe is equipped with a 4-way indexing tool post set for 10 mm tools. A reversible 2 mm pitch lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 6 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.25 to 4 mm pitch with the change gears that are included. All the gears on this lathe are metal. The LittleMachineShop.com model 7500 HiTorque 8.5x20 Bench Lathe is a version of the SIEG SC4 bench lathe. *NOTE* We ship machines only to the US and Canada.

4717 HiTorque 7500 Bench Lathe - 8.5x20, Tooling Package, and Stand Cabinet

All the essentials for a bench lathe setup
Save hundreds of dollars with bundled pricing and shipping
Includes the HiTorque 8.5x20" bench lathe with power cross feed
Includes standard tooling package
Includes stand cabinet and drip tray

HiTorque Bench Lathe, Tooling Package, and stand. This includes the PN 7500 HiTorque Bench Lathe, the PN 4217 Lathe Tooling Package, and the PN 3973 C4 Stand. The LittleMachineShop.com HiTorque 8.5x20 Bench Lathe is the best in its class. No other lathes in this size offer power cross feed. The 1000 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 rpm to 2000 rpm continuously in both directions. There are no gears to shift. The cross feed and compound rest dials are graduated in 0.001" and advance 0.050" per turn. The lathe is equipped with a 4-way indexing tool post set for 10 mm tools. A reversible 2 mm pitch lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.2 to 8 mm pitch with the change gears that are included. All the gears on this lathe are metal. The LittleMachineShop.com model 7500 HiTorque 8.5x20 Bench Lathe is a version of the SIEG SC4 bench lathe. *NOTE* We ship machines only to the US and Canada.

1014 SIEG C2 7x14 Mini Lathe

Full featured miniature lathe at an incredible price
Includes 3" 3-jaw chuck, 2 sets of jaws, and chuck key
Variable speed with two speed ranges for low speed torque
Threading Dial
2MT dead center, change gear set, 1/2" drill chuck

An indispensable workhorse in many workshops for many years, the 7x14 Mini Lathe has all the features you want at an incredibly low price. Trusted quality, full selection of available tooling, accessories, replacement parts, and a price you can't beat! The LittleMachineShop.com exclusive version of this machine includes: - Full 14" bed length with a 2MT tailstock for longer work pieces. - 250 Watt spindle motor with 2 Speed ranges for low speed torque - SANOU 3" (80 mm) 3-jaw chuck with two sets of jaws and chuck key. - 1/2" (13mm) SANOU drill chuck with shank and a 6mm drill. - The cross feed and compound rest dials are graduated in 0.001" and 0.025 mm. - The lathe is equipped with a 4-way indexing tool post set for 5/16" (8 mm) tools and includes an 8x8mm Cutter (DIN4980R). - Threading dial - Chip tray and backsplash. - MT2 dead center - Change gear set - Users Manual THIS SMALL LATHE SHIPS UPS/FEDEX FOR GREATER CONVENIENCE AND SAVINGS

4959 SIEG C3 7x14 Mini Lathe

Full featured miniature lathe at an incredible price
Includes 3" 3-jaw chuck, 2 sets of jaws, and chuck key
Variable speed with two speed ranges for low speed torque
Digital spindle speed readout
Cam-lock tailstock

The Lathe that started it all. An indispensable workhouse in many workshops for many years, the SIEG C3 7x14 Mini Lathe has all the features you want at an incredibly low price. Trusted quality, full selection of available tooling, accessories, and replacement parts, and a price you can't beat! The LittleMachineShop.com exclusive version of this machine includes: - Full 14" bed length with a cam-lock tailstock for longer work pieces. - 350 Watt spindle motor with 2 Speed ranges for low speed torque - Digital spindle speed readout - Cam-lock tailstock - Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. - The cross feed and compound rest dials are graduated in 0.001" and 0.025 mm. - The lathe is equipped with a 4-way indexing tool post set for 5/16" (8 mm) tools. - Includes 3" 3-jaw chuck, 2 sets of jaws, and chuck key - Includes a chip tray, a backsplash guard, and a threading dial.

4962 SIEG X2D Mini Mill

Full featured mini mill at an incredible price
350 Watt variable speed DC drive
Largest table and X-Y travel in its class
R8 Spindle taper
Dovetail solid column and air spring head support

The SIEG X2D Mini Mill has all the features you want at an incredibly low price. This mill has a solid column. It does not tilt from side to side. This construction is significantly stiffer than the tilting column on other mini mills. The large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The resettable feed dials allow you to zero them at any point. The SIEG X2D Mini Mill has drill press handles for drilling and fast motion of the mill's head. It also has Z-axis fine feed with 0.001" resolution for milling operations. This model also includes the air spring head support for even support throughout the Z-axis travel.

We hope you will join us at our 13th Annual Open House - Saturday October 26, 2024 from 10am – 2pm - LEARN MORE

Lathes and Milling Machines

We hope you will join us at our 13th Annual **Open House - Saturday October 26, 2024 from 10am – 2pm - LEARN MORE**