We carry a full range of small rotary tables. There are index (dividing) plates available for all of our rotary tables if you want to do indexing. We also have tailstocks for all the rotary tables.
|
- Conversion Kit for 4" Precision Rotary Table
- Save money by upgrading your existing table to DRO
|
|
- Horizontal or vertical use
- 3" diameter table rotates 360°
- 1:36 ratio or 10° per handwheel revolution
- Scale reads to 15 minutes
- Low profile of 45.0 mm (1.77")
|
|
- Tilting table 0° to 90°
- 3" diameter table rotates 360°
- 1:36 ratio or 10° per handwheel revolution
- Scale reads to 15 minutes
- Low profile - only 2.167" tall
|
|
- Complete Rotary table and indexing solution
- Includes 4" rotary table, diving plate, tailstock
- Lock down clamps and t-slot nuts also included
- Tailstock is adjustable in height
- 2 Morse taper center hole
|
|
- Complete Rotary table and indexing solution
- Includes 4" rotary table, diving plate, tailstock, and 3" 3-jaw chuck
- Lock down clamps and t-slot nuts also included
- Tailstock is adjustable in height
- 2 Morse taper center hole
|
|
- Complete Rotary table and indexing solution
- Includes 4" rotary table, diving plate, tailstock, and 3" 4-jaw chuck
- Lock down clamps and t-slot nuts also included
- Tailstock is adjustable in height
- 2 Morse taper center hole
|
|
- 4" (100 mm) diameter
- Use in horizontal or vertical position
- Worm ratio is 72 to 1
- 10 second rotational accuracy
- 2 Morse taper center hole
|
|
- Horizontal or vertical use
- 4" diameter table rotates 360°
- 1:36 ratio or 10° per handwheel revolution
- Scale reads to 15 minutes
- Low profile - 55mm (2.17") tall
|
|
- 4" (100 mm) diameter
- Use in horizontal or vertical position
- Worm ratio is 72 to 1
- 10 second rotational accuracy
- 2 Morse taper center hole
|
|
- 4" (100 mm) diameter
- Use in horizontal or vertical position
- Worm ratio is 72 to 1
- Digital angular readout with 1 minute (0.017 degree) resolution digital angular readout
- 2 Morse taper center hole
|
|
- Tilting table 0° to 90°
- 4" diameter table rotates 360°
- 1:36 ratio or 10° per handwheel revolution
- Scale reads to 15 minutes
- Low profile - 66mm (2.60") tall
|
|
- 1927 H/V 4" Rotary Table
- 1799 Dividing plate set
- 1800 Tailstock
|
|
- 1810 Precision 4" Rotary Table
- 1811 Dividing plate set
- 1812 Tailstock
|
|
- 1927 H/V 4" Rotary Table
- 1799 Dividing plate set
- 1800 Tailstock
- 1187 3" 3-Jaw chuck
- 3146 Lathe chuck adapter
|
|
- 1810 Precision rotary table (includes chuck adapter)
- 1811 Dividing plate set
- 1812 Tailstock
- 1187 3-Jaw 3" lathe chuck
|
|
- 1927 H/V 4" Rotary Table
- 1799 Dividing plate set
- 1800 Tailstock
- 1175 3" 4-Jaw chuck
- 3146 Lathe chuck adapter
|
|
- 1810 Precision rotary table
- 1811 Dividing plate set
- 1812 Tailstock
- 1175 4-Jaw 3" lathe chuck
|
|
This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The meehanite cast iron table is precision machined and has a 2 Morse taper center hole. This 6" rotary table is graduated with a 360° scale. A micro collar graduated to one minute with a ten second accuracy vernier scale is provided. This horizontal/vertical rotary table has lock down clamps and the crank can be disengaged.
The worm gear and center hole are hardened and ground.
The 6" rotary table is 3.35" high when horizontal, and the centerline is 4.92" above the table when in the vertical position.
The worm ratio is 90 to 1.
Flatness of clamping surface: 0.0006"
Parallelism of clamping surface to base: 0.0008"
Squareness of clamping surface to angle face: 0.0004"
Squareness of clamping surface to center slot: 0.0008"
Concentricity of center bore: 0.0008"
Dividing plates and a tailstock are available for this rotary table.
This is Phase II PN 221-306.
|
|
- 1787 6" Rotary Table
- 1801 Dividing Plate Set
- 1802 Tailstock
|