LittleMachineShop.com is the premier source of tooling, 
parts, and accessories for bench top machinists.  
Contact Us (800) 981 9663
Your Orders
Cart  Cart
   

On Sale
Value Packs
New Products
All Products
Catalog
Store Location
Outlet Store

 
Have you seen?
Keyway Broach Set, 9 Piece
 
 
Most Popular of
DRO Packages
Digital Position Readout, Mini Lathe Tailstock
Digital Position Readout, Mini Lathe Tailstock
Additional popular items
 

Machinist's Calculator

Our mobile app; read this with your phone.
lmscnc.com/calc

 
Onliine Metals  

 

  
Products > Kits > Lathe Starter Kits      

Tooling Package, Small Lathe

          
Tooling Package, Small Lathe
Part Number: 3527
Weight: 16.5 lb
$248.19 Value Price

Purchased individually $274.52

In stock
Quantity:

The price above includes $4.24 tariff surcharge.
Tariff info

 
 
Share this page:
http://lmscnc.com/3527
 
PayPal Credit
 
  • AXA (Series 100) Quick Change Tool Post Set
  • 1/2" Indexable TCMM Inserts, P1X Cut-Off Blade
  • 1/2" Drill Chuck, 2MT Standard to 33JT Drill Chuck Arbor
  • 9-piece carbide Boring Bar Set - 3/8" shank
  • 5 Center Drills (sizes 1-5)

Description

This package contains all the tooling you need to be productive with your lathe on the first day you own it.

The AXA (Series 100) quick change tool post set (QCTP) includes the tool post, mounting hardware, a turning & facing tool holder, a boring, turning & facing tool holder, a heavy duty boring bar holder, a universal parting blade holder, and a knurling, facing & turning tool holder. The quick change tool post is made from hardened steel. No tools are required to change tools. Additional tool holders are available. It requires some level of work, tapping a hole, or making a T-slot nut, to mount this QCTP on your lathe.

The turning tool holders accept tools with 3/8" to 1/2" shank. The turning and boring tool holder accepts boring bars with up to 1/2" round shanks. The cut-off tool holder holds 1/2" tall parting blades.

The 1/2" capacity drill chuck is mounted on a standard 2 Morse taper shank. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512").

The set of 1/2" shank indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a fitted case. The carbide inserts are TCMM-321.

The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter.

The P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance.

This package includes 5 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, 4, and 5. These are 60 degree center drills. These are the sizes that are most used by bench top machinists.

Chris' Tips

Chris Chris' Tips
The components of this package have a retail value of $253.85, so this package saves you almost $34.

See the comparison chart of the quick change tool post sets we carry.

Make sure you get the correct inserts and retaining screws for your indexable turning tools.

Our chart of indexable inserts shows which inserts and which screw to use with each of our indexable tools.

P-type cut-off (or parting) blades are T-shaped (don't ask). Because the body of the tool is narrower than the cutting tip, friction is reduced making the difficult task of parting off somewhat easier.

Size P1 blades are 1/16" wide and are the most commonly-used size. P1N blades are 0.040" wide. These thinner blades are good for small work. P1X blades are 5/64" wide. Use these thicker blades for parting off larger diameters where you need additional stiffness.

It is easier to part off large diameters if you cut a groove that is wider than the cut-off blade. First, make a cut about 0.100" deep. Now back out and move over at least 0.010". Cut in again, widening the slot. Continue with this cut until you are 0.100" deeper than the first slot. Repeat this process, moving back and forth, until you are through.

Combined drills and countersinks, commonly called center drills, are used to produce a center hole on a workpiece for turning between centers. Center drills are also used to start drilled holes. Because they are very stiff they don't have a tendency to wander.


Here are the sizes of center drills.
Number Body Dia. Drill Dia. Length
1 1/8" 3/64" 1 1/4"
2 3/16" 5/64" 1 7/8"
3 1/4" 7/64" 2"
4 5/16" 1/8" 2 1/8"
5 7/16" 3/16"  2 3/4"

Contents

This product contains the following items:
  P/N Description Quantity
Arbor, Drill Chuck 2MT Standard to 33JT 2955 Arbor, Drill Chuck 2MT Standard to 33JT 1
Boring Bar Set, 1/2" Shank, Carbide 1247 Boring Bar Set, 1/2" Shank, Carbide 1
Center Drills, HSS, Set of 5 (Numbers 1-5) 1230 Center Drills, HSS, Set of 5 (Numbers 1-5) 1
Cut-Off Blade, P1X 1552 Cut-Off Blade, P1X 1
Drill Chuck, 1/2" 1212 Drill Chuck, 1/2" 1
Quick Change Tool Post Set, AXA 2280 Quick Change Tool Post Set, AXA 1
Turning Tools, 1/2" Indexable, Triangle Inserts 2286 Turning Tools, 1/2" Indexable, Triangle Inserts 1

Compatibility

Compatibility

This product works with lathes with a 9.1 to 12 inch swing and a 2 Morse taper tailstock taper including:

  •   Grizzly G0516 9.75x21 Lathe Mill Combo
  •   SIEG C6 9.75x21 Lathe
  •   Prazi SD500 10x20 Lathe

 

Click here to see the tabs view of this page.

 

Contact Us / Company Info / Privacy Policy / Warranty / Terms & Conditions / Payment Options / Shipping Rates & Policies
Copyright © 2007-2019 LittleMachineShop.com
 
Phone: (800) 981-9663