Quick Change Tool Post Set, AXA

Quick change tool post set for lathes with up to 12" swing
AXA, or series 100 size
Tool holders interchange with Aloris, Dorian, and Phase II
All steel construction
Includes five tool holders

Part Number: 2280
Weight: 11.5 lb

$174.95 On Sale

Regularly $194.95

Share this page:
http://lmscnc.com/2280

Description

AXA, or series 100, wedge type quick change tool post set is designed for lathes with up to 12" swing.

All working parts are hardened and ground. This lathe tool post set is completely sealed for maintenance-free operation.

This lathe tool post set includes the tool post and the following tool holders:

No. 1 - Turning & Facing Tool Holder

No. 2 - Boring, Turning & Facing Tool Holder

No. 4 - Heavy Duty Boring Tool Holder, will hold 5/8" or 3/4" round shanks.

No. 7 - Universal Parting Blade Holder

No.10 - Knurling, Facing & Turning.

This set includes a 9/16"-18 threaded stud and a piece of steel from which you can make a T-slot nut to fit your lathe. The tool holders interchange with Aloris, Dorian, and Phase II.

TO ENSURE POPER FIT:

- If adding to a HiTorque machine from LMS you may need a modified compund if your machine originally came with a traditional turret post. (see Chris's tips).

- It is a good fit on 9x20 lathes but requires some modification or our mounting sleeve (see Chris's tips).

- Many people feel that these tool posts are too large for mini lathes, but others like the mass and rigidity they provide. Some modification may be required to install correctly (see Chris's tips).

Chris' Tips

Chris' Tips
This QCTP is not always a bolt-on accessory for the every lathe.

For a HiTorque Bench Lathe from LMS (SIEG SC4) with installed turret post, add a Compound Rest Top, Bench Lathe for AXA QCTP (4914)

This QCTP is a good fit for the 9x20 lathe. it is a bolt-on accessory with the addition of our 3712 Quick Change Tool Post Mount, AXA for 9x20 Lathes

For a mini Lathe (7"X) you can use one of our compound rest bottoms that has been milled down 1/4" to use this QCTP on a min lathe.

See the comparison chart of the quick change tool post sets we carry.

Here are instructions for mounting the QCTP on many different lathes.

Photos

	No. 1 - Turning & Facing Tool Holder
	No. 2 - Boring, Turning & Facing Tool Holder
	No. 2 - Holder, side view
	No. 4 - Heavy Duty Boring Tool Holder
	No. 7 - Universal Parting Blade Holder
	No.10 - Knurler, Facing & Turning
	Tool Post