• Collet Chuck, ER-16, Straight Shank, Professional Grade
1 1

Collet Chuck, ER-16, Straight Shank, Professional Grade

Collet Chuck, ER-16, Straight Shank, Professional Grade

5189

$79.95 USD
$79.95 USD
Sale Sold out
Shipping calculated at checkout.

Low stock

Key Features

  • 3/4" x 2 1/2" shank ER-16 collet chuck
  • Made of 20CrMnTi alloy steel
  • Max runout is 0.0003"
  • Balanced to 18,000 RPM
  • Electrolysis nickle coating

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

View full details

Product Information

Description

Collet Chuck, ER-16, Straight Shank, Professional Grade
This ER-16 straight shank collet chuck is a great tool for holding small end mills and engravers. It is made of 20CrMnTi alloy steel and is balanced to 18,000 RPM. The maximum runout is 0.0003" (0.0076 mm).
ER-16 collets have a range of 1/32" to 3/8" (0.5 to 10.0 mm). The overall length is 4.087" (104 mm) and the width at the nut is 1.102" (28 mm).
*Collet must be assembled into a collet chuck nut before inserting into the collet chuck.

Chris's Tips

With all ER collet chucks, the collet must be snapped into the nut before placing it into the chuck. There is an eccentric ring inside the nut that engages the groove in the collet. That is what makes them self-ejecting. Tilt the collet again to remove it from the nut.

ER Collet Nuts