Power Feed, Bench Mill - Long Table (27.5" x 6.25")

Fits newer HiTorque Bench Mills (6500/6570) and SIEG SX2.7L mill with Long Table (27.5" x 6.25")

This power feed mounts on the left end of the mill's table and drives the X-axis feed screw. It is variable speed (0 to 20 inches per minute).

The kit takes about 20 minutes to install. It is a bolt-on accessory for the bench mill and requires no modifications to the machine. The power feed adds 8 1/4" inches to the left end of the table. 

Like all our machines it runs on a standard 120-volt power outlet 

*Note: Check out Chris' Tips below for videos of Power Feed in use and an Installation video and review from Frank Hoose.

Here's a video showing the power feed in action.

This 24-minute video by Frank Hoose shows installation of the power feed and includes Frank's review.

This product was designed for machines manufactured by SIEG, including those listed below. We have added compatibility for other non-SIEG machines when a “fit” can be verified.

If your machine is not listed, we cannot verify compatibility but encourage you to contact us. With additional information we may be able to help you find a solution.

• LittleMachineShop.com 5550 HiTorque Bench Mill
• LittleMachineShop.com 6500 HiTorque Bench Mill-Long Table
• LittleMachineShop.com 6550 HiTorque Bench Mill
• LittleMachineShop.com 6570 HiTorque Bench Mill
• SIEG SX2.7L Bench Mill

• POWER FEED MANUAL