Tooling Package, R8 Mini Mill Premium

	Part Number: 4858 Weight: 56.1 lb $669.95 Value Price Purchased individually $748.00 In stock Quantity:     Share this page: http://lmscnc.com/4858
3" Precision milling, professional and 10 pairs of 3" long, high grade, thin parallels Thirteen piece R8 collets, Two six-piece M42 8% cobalt end mill set - 2 & 4 flute 58 - piece clamping kit - 3/8"-16, 7/16" T-slots Premium precision 1-2-3 blocks, five center drills - 60° countersinks Combination edge and center finder and a T-slot cleaner

Description

Milling Vise: 3" Kurt-style professional milling vice with detachable 360° swivel base and easy to read divisions. Top, gib, jaws, swivel base, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances.

Overall length is 11.6" and the height is 3.1" without base, and 4.3" with base. Jaws are 3.15" wide, 0.9" deep, open 3", and are perpendicular to the ways within 0.0004" in 4". The ways are parallel to the base within 0.0003" in 4" without the swivel.

Thin Parallels: Set of ten pairs, 1/8" thick x 3" long. Made of high-grade alloy steel hardened to 52–58 Rc, parallel within 0.0001" on top and bottom. Parallel heights: 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16"(pairs matched within 0.0002").

End Mills: Two six-piece M42 8% cobalt, center cutting End Mills sets, 2 & 4 flute. Sizes: 1/8", 3/16", 1/4", 5/16", 3/8" and 1/2". The smaller end mills have 3/8" shanks and the 1/2" end mill has a 1/2" shank.

R8 Collets: 13 R8 round collets sizes 1/8" to 1" by 16ths. Made of high grade tool steel, hardened and ground to a TIR of 0.0005" or less. This set includes all the sizes required for common end mills.

1-2-3 Blocks: Premium precision 1-2-3 blocks, ground and case hardened on all sides to 55-60 Rc. Blocks are 1" x 2" x 3"; parallel, flat, and square within 0.0001". Mini mill tooling package set includes two matched blocks and 5 cap screws. Blocks have 23 holes, five are threaded 3/8"-16 NC.

Five piece M42 8% cobalt combined drills and countersinks sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks.

Chris' Tips

Chris' Tips
T-slot cleaners are designed for Bridgeport mills. It takes a few seconds on a grinder to reduce the size of the "T" to fit the slots on the mini mill.This is our premium vise for the mini mill. It is considerably heavier and therefore more rigid than our next biggest vise.

Combined drills and countersinks, commonly called center drills, are used to produce a center hole on a workpiece for turning between centers. Center drills are also used to start drilled holes. Because they are very stiff they don't have a tendency to wander.

Here are the sizes of center drills.

Number	Body Dia.	Drill Dia.	Length
1	1/8"	3/64"	1 1/4"
2	3/16"	5/64"	1 7/8"
3	1/4"	7/64"	2"
4	5/16"	1/8"	2 1/8"
5	7/16"	3/16"	2 3/4"

Contents

	P/N	Description	Quantity
	2881	Blocks, 1-2-3, Ultra Precision	1
	4859	Center Drills, Cobalt, Set of 5 (Numbers 1-5)	1
	5975	Clamping Kit, 7/16" T-Slot, Professional Grade	1
	4860	Collet Set, R8, Set of 13, Professional Grade	1
	1959	Edge and Center Finder, 3/8" Shank, Fisher	1
	4888	End Mill Set, 6 Piece 2 Flute, Cobalt	1
	4887	End Mill Set, 6 Piece 4 Flute, Cobalt	1
	4991	T-Slot Cleaner, 7/16" T-Slot	1
	2220	Thin Parallels, 3" Long, 10 Pairs, Ultra-Precision	1
	3125	Vise Mounting Kit, 7/16" T-Slot	1
	4740	Vise, 3" Precision Milling, Professional Grade	1

Compatibility