Taps, Metric, Spiral Point, TiN Coated, Individual Sizes
Taps, Metric, Spiral Point, TiN Coated, Individual Sizes
SKU:6184
Low stock
Couldn't load pickup availability
Key Features
Key Features
- Metric spiral point plug style taps
- High speed steel (HSS) / TiN coated
- Sizes M2 - M10
- Ground threads
- Comply with DIN 371 standards
Share
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
View full details
Product Information
Description
High speed steel (HSS) spiral point plug style taps with a titanium (TiN) coating.
Spiral point style plug taps have the same general tap dimensions as straight flute taps however they have the first few threads cut at an angle which enhances the removal of chips from the cutting surface. This design makes spiral point taps ideal for production tapping of through holes.
The flutes on a spiral point tap are more shallow than those of a conventional tap resulting in more surface area for cutting, making them stronger thereby allowing for higher cutting speeds and less power required for the tap to travel.
These metric taps are available in sizes ranging from M2 to M10 and comply with standard tap dimensions as defined in DIN 371. The thread tap limits (pitch diameter limits) range from D3 to D6.
D3 = plus 0.0015
D4 = plus 0.0020
D5 = plus 0.0025
D6 = plus 0.0030
Chris's Tips
We are big fans of High-Speed Steel. Find out why... What's So Good About High-Speed Steel?
Need help choosing the correct tap? Try this quick guide: Choosing the Correct Tap
Here is a chart of Tap & Clearance Drill Sizes