Tooling Package, R8 CNC Mini Mill 

Tooling Package, R8 CNC Mini Mill
  • 3" precision milling vise (Heavy) and 10 pairs of 3" long thin parallels
  • Five piece R8 end mill holders, 20 piece end mill set - 2 and 4 flute (10 each)
  • 58-piece clamping kit - 3/8"-16, 7/16" T-slots
  • Precision 1-2-3 blocks, five center drills - 60° countersinks
  • Combination Edge and Center Finder and a T-Slot Cleaner
Part Number: 4212
Weight: 44.7 lb
$435.95 Value Price

Purchased individually $475.50

In stock
Tooling package with all the essentials for an R8 CNC Mini Mill.

Milling Vise: 3" Kurt-style milling vice. Top, gib, jaws, bottom of vise bed and all plate mounting surfaces are ground. The angle tight positive lock style jaws are interchangeable with industry standard machine vises, are hardened and ground, and can be mounted on either end of the fixed and movable jaw supports for a wide range of clamping distances.

Overall length is 10.85" and the height is 3.05". Jaws are 3.15" wide, 1.04" deep, open 3", and are perpendicular to the ways within 0.002" in 4". The ways are parallel to the base within 0.0006" in 4" without the swivel.

Thin Parallels: Set of ten pairs, 1/8" thick x 3" long, in fitted case. Made of high-grade alloy steel hardened to 52-58 Rc, parallel within 0.0002" on top and bottom. Parallel heights: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8" (pairs matched within 0.0004").

End Mills: 20 piece set included 2 flute and 4 flute center cutting TiN coated HSS end mills sizes 3/16"-3/4" by 16ths.

The 5-piece end mill holder set includes adapters for end mills with shank diameters of 3/16, 3/8, 1/2, 5/8, and 3/4 inches. The end mill holders have an R8 shank and use the drawbar that comes with the mini mill. This set includes all the sizes required for common end mills.

1-2-3 Blocks: Ground and hardened on all sides to 50-60 Rc, sizes 1" x 2" x 3". Parallel within 0.0002", flat within 0.0002", and square within 0.00021". Set has two matched blocks, 23 holes of which 5 are threaded 3/8"-16 NC.

Center Drills: Five sizes combined drills and countersinks made of high speed steel. Sizes 1, 2, 3, 4, and 5 with 60 degree counter sinks.

Chris Chris' Tips
T-slot cleaners are designed for Bridgeport mills. It takes a few seconds on a grinder to reduce the size of the "T" to fit the slots on the mini mill.This tooling package includes end mill holders rather than R8 collets. End mill holders allow you to remove a tool from the spindle and replace it without affecting the Z-height of the tool.

Nominal Sizes for 7/16" T-Slot Nut

Suitable for 12 mm T-Slot tables on common mini mills.

7/16 inch t slot nut


This product works with mills with a R8 spindle taper including:

  •   BusyBee CX605 Craftex Mini Mill
  •   Cummins (Tools Now) 7877 Mini Mill
  •   Eastwood 32498 Mini Mill
  •   Harbor Freight 44991 Central Machinery Mill/Drill
  •   Homier 03947 Speedway Mini Mill
  •   King Canada KC-15VS King Industrial Mini Mill
  •   Northern Tool 49657 KLUTCH Mini Mill
  •   Penn Tool Co XJ-9510-1 Precise Mini Mill
  •   SIEG X2-R8 Mini Mill
  •   Travers Tools OT2213 OTMT Mini Mill
  •   SIEG X2P Mini Mill
  • 4962 SIEG Mini Mill
  •   SIEG X2D Mini Mill
  •   SIEG X2L Mini Mill
  •   WEN 33013 WEN Mini Mill
  •   SIEG X2LF Mini Mill
  •   BusyBee CX612 Craftex Mini Mill
  •   SIEG SX2 Mini Mill
  •   Micro-Mark 84630 MicroLux Mini Mill
  • 3900 HiTorque Mini Mill
  •   SIEG SX2L Mini Mill
  • 4190 HiTorque Mini Mill
  • 3990 HiTorque Mini Mill
  • 3960 HiTorque Mini Mill
  • 6450 HiTorque Mini Mill
  •   SIEG SX2LF Mini Mill
  •   Grizzly G0781 Mill/Drill