Spray and Flood Coolant Units
Kool Mist and Spra-Kool Midget coolant spray Units, flood coolant pump and tank units, and Kool Mist coolant for mills and lathes. The simplest way to add coolant to any machine. Kool Mist coolant is recommended for mist and flood cooling. |
2235 Coolant, Kool Mist 77, Gallon
- Safe for people
- Safe for materials
- Safe for the environment
- Safe for machines
Kool Mist 77 coolant is highly recommended for mist cooling any metal or alloy where tougher machine conditions require greater lubricity. It is particularly useful where the material is very abrasive.
Improves metal cutting, milling, turning, drilling, grinding, and sawing.
You can also use Kool Mist 77 as a flood coolant.
Kool Mist 77 is 100% synthetic and biodegradable, and meets the requirements of OSHA & EPA. This coolant will not cause rancidity or buildup and creates no rust or corrosion when diluted with clean water. Workpieces and machine parts remain clean and unstained.
Mix this concentrate with 32 parts water before use. Makes 33 gallons of coolant. |
|
3089 Cutting Compound, Nikx Stikx
- Wax-based metal-cutting compound in 6" tube
- Extends tool life
- Lubricate saw blades, taps, drills, and hole saws
Nikx Stikx is a non-hazardous solid metal-cutting compound that eases your task and extends the life of all metal cutting and threading tools. Cutting oils are combined with wax in a tube approximately 1" in diameter and 6" long.
Rub a little compound on the tool cutting edges. The compound heats up when cutting starts. The heated compound migrates to the tool cutting edge. The cutting compound helps prevent steel and aluminum from galling on the tool cutting edges.
The compound works equally well on wood working tools by preventing wood pitch build-up and is a great lubricant for driving screws and lag-bolts.
Craftsmen, electricians, plumbers, maintenance engineers and machinists welcome the product because it’s convenient to use without fear of spillage. |
|
3120 Cutting Fluid, Re-Li-On, 16 Oz.
- Engineered formula for cutting and tapping
- Extends tool life and controls chip welding
- Improves finishes and tolerances
- A safe and odorless cutting lubricant
Re-Li-On cutting and tapping fluid is a non-ozone depleting product that is safe on aluminum and exotic alloys such as stainless steel, hastelloy, inconel and titanium. The engineered formula clings to the cutting tool and provides strong lubrication. |
|
3088 Cutting Fluid, Re-Li-On, 4 Oz.
- Engineered formula for cutting and tapping
- Extends tool life and controls chip welding
- Improves finishes and tolerances
- Safe and odorless
- Spray top for easy application
Re-Li-On cutting and tapping fluid is a non-ozone depleting product that is safe on aluminum and exotic alloys such as stainless steel, hastelloy, inconel and titanium. The engineered formula clings to the cutting tool and provides strong lubrication. |
|
6362 Cutting Oil, Viper's Venom, 12 oz.
- 12 oz. bottle - Vipers Venom Cutting Oil
- Superior high-sulfur cutting oil
- For cutting all ferrous metals
- Ideal for tapping, threading, reaming and lathe work
- Will not cause sticking or gumming
This high sulfur content cutting oil was recommended to us by the guys at the Arthur R. Warner Co. They know high speed steel and they use this stuff in their shop.
It's great for threading, tapping, turning and milling.
Viper's Venom is a superior high-sulfur cutting oil that is specifically formulated for cutting all ferrous metals. Ideal for tapping, threading, reaming, and lathe work. Works extremely well when threading or reaming stainless steel rifle barrels due to its extreme lubricity and cooling properties.
Viper's Venom is a stable product. It contains saponifiables to promote adhesion to the work and tools, and to provide oiliness
It is fortified with sulfur and chlorine to reduce metal pick-up, galling, and welding
It has good cooling ability
It will cause only slight staining of ferrous metals
It will not cause sticking or gumming
It has good resistance to rancidity |
|
5848 Cutting Oil, Viper's Venom, 32 oz.
- 32 oz. bottle - Vipers Venom Cutting Oil
- Superior high-sulfur cutting oil
- For cutting all ferrous metals
- Ideal for tapping, threading, reaming and lathe work
- Will not cause sticking or gumming
This high sulfur content cutting oil was recommended to us by the guys at the Arthur R. Warner Co. They know high speed steel and they use this stuff in their shop.
It's great for threading, tapping, turning and milling.
Viper's Venom is a superior high-sulfur cutting oil that is specifically formulated for cutting all ferrous metals. Ideal for tapping, threading, reaming, and lathe work. Works extremely well when threading or reaming stainless steel rifle barrels due to its extreme lubricity and cooling properties.
Viper's Venom is a stable product. It contains saponifiables to promote adhesion to the work and tools, and to provide oiliness
It is fortified with sulfur and chlorine to reduce metal pick-up, galling, and welding
It has good cooling ability
It will cause only slight staining of ferrous metals
It will not cause sticking or gumming
It has good resistance to rancidity |
|
3896 SpillMaster Container
- Avoid workbench spills
- Holds cutting fluids and lubricants
- Will NOT spill, even when upside down
- Durable polyethylene for long life
- Spill proof container includes applicator brush
The SpillMaster is a great way to keep cutting fluid handy on your workbench. The included acid brush makes application easy.
*NOTE* SpillMasters come with Red, Blue, and White tops. We ship the colors randomly based on availability. If you want a particular color, put a note in the Special Instructions box on your order. We'll accommodate your request if we have that color in stock. |
|
HiTorque 8.5x20 Bench Lathe
Belt Drive Conversion Kit, Mini Mill
