LittleMachineShop.com has the most complete selection of Morse taper products around. We carry all the Morse taper products you need for your bench top machine shop. Our products include Morse taper collets, Morse taper end mill holders, live centers, dead centers, indexable end mills, and drill chuck arbors.
|
1630 Boring Head Shank, 2MT
- 2MT Shank
- 7/8" - 20 Mounting Thread
- Tapped for 3/8" -16 Drawbar
- Made of high grade tool steel
- Hardened and ground
This boring head shank has a 2 Morse taper on one end and a 7/8 - 20 thread on the other. It is tapped for a 3/8"-16 drawbar.
The Morse taper shank adapts our boring head to the mills with a 2 Morse taper spindle, and to the tailstock of the mini lathe. |
|
1265 Boring Head Shank, 3MT
- 3MT Shank
- 7/8"-20 Mounting Thread
- Tapped for 3/8" -16 Drawbar
- Made of high grade tool steel
- Hardened and ground
This boring head shank has a 3 Morse taper on one end and a 7/8 - 20 thread on the other. It is tapped for a 3/8"-16 drawbar.
The boring head shank adapts our boring head to the mini mill with a 3 Morse taper spindle. |
|
1752 Collet Set, 2MT, Set of 7
- Set of seven 2 Morse taper round collets
- 1/8 - 1/2" x 16ths
- Drawbar thread: 3/8" - 16TPI
- Made of high-grade tool steel
- Hardened and ground to close tolerance
Set of seven 2 Morse taper round collets. Made of high grade tool steel these collets have been hardened and ground to close tolerance.
This Morse taper collet set includes seven 2MT collets sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2". |
|
1948 Collet Set, 3MT, Set of 11
- Set of eleven 3 Morse taper round collets
- Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", and 3/4"
- Drawbar thread: 3/8"-16
- Made of high grade tool steel
- Hardened and ground to close tolerance
Set of eleven 3MT round collets that work with a wide variety of lathes. Made of high grade tool steel, hardened and ground to close tolerance. |
|
2023 Collet Set, 3MT, Set of 4
- Set of four #3 Morse taper round collets
- Includes 5/16", 7/16", 9/16", and 11/16"
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
This set comprises the "missing" collets from our seven piece set. |
|
1615 Collet Set, 3MT, Set of 7
- Set of seven 3 Morse taper round collets
- 1/8 - 3/4" x 8ths & 3/16"
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
Set of seven 3 Morse taper round collets. Made of high grade tool steel these collets have been hardened and ground to close tolerance.
Includes seven 3MT collets sizes: 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", and 3/4". |
|
1751 Collet, 2MT, 1/2"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
1/2" 2 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1747 Collet, 2MT, 1/4"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
1/4" 2 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1745 Collet, 2MT, 1/8"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
1/8" 2 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1746 Collet, 2MT, 3/16"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
3/16" 2 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1749 Collet, 2MT, 3/8"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
3/8" 2 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1748 Collet, 2MT, 5/16"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
5/16" 2 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1750 Collet, 2MT, 7/16"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
7/16" 2 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1609 Collet, 3MT, 1/2"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
1/2" 3 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1607 Collet, 3MT, 1/4"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
1/4" 3 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1605 Collet, 3MT, 1/8"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
1/8" 3 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1861 Collet, 3MT, 11/16"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
11/16" 3 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1606 Collet, 3MT, 3/16"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
3/16" 3 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1611 Collet, 3MT, 3/4"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
3/4" 3 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1608 Collet, 3MT, 3/8"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
3/8" 3 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1858 Collet, 3MT, 5/16"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
5/16" 3 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1610 Collet, 3MT, 5/8"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
5/8" 3 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1859 Collet, 3MT, 7/16"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
7/16" 3 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
1860 Collet, 3MT, 9/16"
- Morse taper: external
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
9/16" 3 Morse taper collet.
The drawbar thread is 3/8 - 16 NC. |
|
2455 Collet, Tormach TTS, 3MT, 3/4"
- Special shortened 3MT collet for TTS system
- Precision ground
- 3/8" - 16 drawbar thread
This precision ground 3MT collet is shorter than a normal 3MT collet to ensure that the TTS tool holder contacts the spindle.
Tormach part number 30251. |
|
4314 Collets, 2 Morse Taper, Individual Sizes
- 2 Morse taper collets
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
|
|
4315 Collets, 3 Morse Taper, Individual Sizes
- 3 Morse taper collets
- Drawbar Thread: 3/8"-16TPI
- Made of high grade tool steel
- Hardened and ground to close tolerance
|
|
1890 Dead Center, 2MT
- Solid 2 Morse taper dead center
- 60 degree included point angle
- 0.708" (18 mm) diameter
- 3.937" (100 mm) overall length
This center fits the tailstock of the mini lathe. This center is made from hardened steel and ground for accuracy. The point is a 60º included angle. |
|
1188 Dead Center, 3MT
- 3 Morse taper solid dead center
- 60 degree included point angle
- 0.96875" diameter body
- 4.921" overall length
This 3MT dead center fits the headstock of the mini lathe and the bench lathe. This center is made from hardened steel and ground for accuracy. The point is a 60º included angle. |
|
1889 Indexable End Mill, 2MT, 16 mm
- 16 mm (0.63") cutting diameter
- 2 Morse taper drawbar shank
- 3/8"-16 thread for the drawbar
- Comes with one insert
This indexable end mill requires one TPG-221 (ANSI) or TPGN110304 (ISO) insert. |
|
1146 Indexable End Mill, 3MT, 30 mm
- 30 mm (1.18") cutting diameter
- 3 Morse taper shank
- 3/8"-16 thread for the drawbar
- Comes with one set of inserts
The indexable end mill uses TPC322 (ANSI) TPCN160308 (ISO) inserts. |
|
1704 Live Center, 1MT Heavy Duty
- Point is a 60º included angle
- Standard 1 Morse taper
- 1.39" diameter body
- Works with lathes with a 1 Morse taper tailstock taper
Live Center, 1 Morse taper shank.
This center is made from hardened steel and ground for accuracy. It has precision high quality bearings. The point is a 60º included angle.
The maximum diameter of the point is 0.71". The OD of the body is 1.39". The distance from the tip to the front of the body is 0.71".
The rated radial load is 66 lbs. The maximum speed is 4000 RPM. The runout is 0.0003". |
|
1189 Live Center, 2MT Short
- Point is a 60º included angle
- Short 2 Morse taper for the mini lathe
- Fits Jet 1014 mini wood lathe
- 1.495" diameter body
This mini lathe live center fits the tailstock of the mini lathe.
The point is a 60º included angle and is 0.71" in diameter. |
|
1592 Live Center, 2MT Standard Heavy Duty
- Point is a 60º included angle
- Standard 2 Morse taper for the mini lathe
- 1.77" diameter body
This center is made from hardened steel and ground for accuracy. It has precision high quality bearings. The point is a 60º included angle.
The maximum diameter of the point is 0.98". The OD of the body is 1.77". The distance from the tip to the front of the body is 1.66".
The rated radial load is 90 lbs. The maximum speed is 5000 RPM. |
|
4969 Revolving Tailstock Chuck Adapter, 3" Chuck, 3MT
- Mounts a 3" 3-jaw chuck in the tailstock
- Three ball bearings provide support for heavy duty load and high speed.
- Max Load: 1760 lbs.
- Maximum Rated RPM: 4000
- 3MT standard shank
Use this revolving tailstock drill chuck adapter in conjunction with a 3" 3-jaw chuck in place of a live center. No more center drilling. This 3MT chuck works great for long, large diameter work pieces where a live center or steady rest just won't cut it. Three ball bearings for heavy duty loads and relatively high speed. |
|
5965 Revolving Tailstock Chuck Adapter, 4" Chuck, 3MT
- Mounts a 4" 3-jaw chuck in the tailstock
- Three ball bearings provide support for heavy duty load and high speed
- Max Load: 1,760 lbs
- Maximum Rated RPM: 2,500
- 3MT standard shank
Use this in conjunction with a 4" 3-jaw chuck in place of a live center. No more center drilling. This works great for long, large diameter work pieces where a live center or steady rest just won't cut it. Three ball bearings for heavy duty loads and relatively high speed. |
