LittleMachineShop.com has the measuring tools you need for your shop. We carry calipers, micrometers, steel rules, wigglers, edge finders, center gages, screw pitch gages, and more.
|
- Set of 18 metal angle gages
- 5° to 90° by 5° increments
- Satin chrome finish
- Eight gaging surfaces on each gage
- Check primary angle, 1/2 primary and complementary angles
|
|
- Tilt range: 0 - 90 Degrees x 4
- Auto Off conserves battery life
- Resolution: 0.05 Degrees Accuracy: +/-0.2 Degrees
- Compact and Lightweight design with +/-0.1 Degree Repeatability
- Mounting magnets on 3 sides to ensure accurate measurements
|
|
- Sizes bolts, nuts, and screws
- Sorts coarse threads, fine threads, and metric threads
- Measures inches and millimeters
- Length: 8-5/8", Width: 4-1/4"
|
|
- 1/16" to 1/2" fractional size drill gage
- Quickly check drill sizes
- 32 holes marked with drill sizes
- Measurement marked in inches and decimal equivalents
|
|
- #0 to 3/4" coarse & fine threads
- 1.6 mm to 16mm metric threads
- Tap drill sizes on back
|
|
- Measure ID of holes from 2" to 6" in diameter
- Close tolerance measurement of ID, taper and roundness
- interchangeable anvils
- Accuracy: 0.0005"
- Includes fitted case
|
|
- Max. measurement 6" (150 mm)
- Flat leg type
- Quick adjustment nut
- Easy adjustment over entire range
- Polished natural steel finish
|
|
- Max. measurement 6" (150 mm)
- Flat leg type
- Quick adjustment nut
- Easy adjustment over entire range
- Polished natural steel finish
|
|
- Made of high quality steel
- Satin chrome finish
- Use for grinding and setting thread cutting tools
- Gaging surfaces are precision ground
|
|
- Starrett 60 degree center gage
- Starrett catalog number C391
- Extremely handy for use in grinding and setting thread cutting tools
- Spring tempered steel
|
|
- For Acme threads
- Made of high quality steel
- Satin chrome finish
- Use for grinding and setting Acme thread cutting tools
- Gaging surfaces are precision ground
|
|
- Fine vertical adjustment with lock
- 6" x 6" granite base flat within 0.0005"
- 1" Diameter column, 8" tall
- Includes a 0-1" x 0.001" dial indicator
|
|
- Slot Width: .64"
- 1.5 x 4 x 1.5 Inches
- Professional Quality
- 3" Base
|
|
- Digital depth gage with six extension rods
- 3 Reading functions: inch, metric, & fractional
- Resolution: .0005" / .01mm / 1/128 inch
- Accuracy: +/- 0.001"
- Power saving auto off feature with extra large LCD display
|
|
- 6" Rule made of Hardened and Tempered Steel
- Protractor Graduations Include 30°, 45°, and 60° Angles
- Base Surface Measures 2-12" x 1/8" Thick
- Rule Measures 7/32" Wide and 0.041" Thick with Deeply Etched Markings
- 32nds one side, 0.5mm on reverse
|
|
- Starrett steel rule depth gage, 0-6" range, 32nds/64ths
- Starrett catalog number 237
- Head length is 2-5/8"x1/8"
- Hardened steel head, tempered steel rule
|
|
- Drill press digital readout (DRO)
- Easy to read LCD display
- Hardened stainless steel beam
- Range: 0 - 5"/125 mm, Accuracy: 0.001"
- Resolution: 0.0005"/0.01 mm/ 1/64"
|
|
- Drill Gage
- Made of steel with etched markings
- Sizes #61 - #80
- Use for twist drill sizing
|
|
- Starrett Standard Letter Size Drill Gage, A-Z range
- Starrett catalog number 198
- Hardened steel
- Drill sizes .234" to .413"
|
|
- Starrett Drill Point Gage, 59° bevel, 32nds graduations
- Starrett catalog number 22C
- The head is beveled to 59° (the correct drill point angle)
- Graduated in 32nds along the 59° face for measuring the drill lips
|
|
- Stainless steel with satin chrome finish
- Carbide tipped scriber for longer life
- Fine feed adjustment
- Positive lock screw
- 0.001" Graduations
|
|
- Resolution: 0.0005"
- Accuracy +/-0.001" / Repeatability: 0.0005"
- Removable Scriber (carbide tipped)
- Solid aluminum base, stainless steel beam
- Large LCD Display, Inch, Metric and Fractions
|
|
- Resolution: 0.0005"
- Accuracy +/-0.001"
- Repeatability: 0.0005"
- Solid aluminum base, stainless steel beam
- Large LCD Display, Inch, Metric and Fractions
|
|
- Starrett 0-6" (0-150 mm) range digital height gage
- Starrett catalog number 3751AZ-6/150
- Easy-to-read LCD with .32" high characters
- Linear Accuracy: 0.001" (0.02mm)
- Resolution: .0005" (0.01mm)
|
|
- Steel universal arm with central locking mechanism
- 8 mm indicator stem hole
- 11" arm length
- Fine adjustment knob
- 8 mm x 40 mm rod (0.315" x 1.5748")
|
|
- Steel universal arm with central locking mechanism
- 3/8" indicator stem hole
- 6" arm length
- Fine adjustment knob
- 8 mm x 40 mm rod
|
|
- 1/4" Straight
- 3" overall length
- For use with test indicators and probes with dovetails
- Locks in 90° increments
|
|
- Holds dovetail indicators
- 3/8" & 7/32" mounting holes for holding the stem of almost all dial indicators
- 4" long 3/8" sqaure shank makes this great for use in a lathe
|
|
- Magnetic base indicator holder with one-knob lock
- Permanent magnet has an 80 kg (176 lb) holding force
- On/off switch makes it easy to position
- V-groove base allows you to mount it on cylindrical surfaces
|
|
- Magnetic base indicator holder
- 110 lbs pull with 220mm (8.66") arm length
- Tight locking force
- Dovetail groove for test indicators
- Three clamping holes, 6mm, 8mm and 3/8"
|
|
- Magnetic base indicator holder with fine adjustment
- Permanent magnet has an 60 kg (132 lb) holding force
- On/off switch makes it easy to position
- V-groove base allows you to mount it on cylindrical surfaces
- Works with most AGD dial and test indicators
|
|
- Unique top fine adjustment mechanism
- 3-D rigid aluminum arm movement
- Dovetail groove for test indicator
- Maximum reach is 10.7"
- On/Off switch
|
|
- Unique top fine adjustment mechanism
- 3-D rigid aluminum arm movement
- Dovetail groove for test indicator
- Maximum reach is 6.5"
- On/Off switch
|
|
- This magnetic base is smaller than most
- Unique central locking mechanism locks all motion with one knob
- On/off switch makes it easy to position
- V-groove base allows you to mount it on cylindrical surfaces
- Base is 1.2" by 1.5". Maximum reach 7".
|
|
- Z-Limit brand guarantees professional quality
- Magnetic base indicator holder with fine adjustment
- Permanent magnet has an 65 kg (145 lb) holding force
- On/off switch makes it easy to position
- V-groove base allows you to mount it on cylindrical surfaces
|
|
- Starrett Magnetic Base with Attachments
- Starrett catalog number 657AA
- Powerfull magnetic base holds firmly to steel and iron surfaces
- Push button turns magnet on or off for quick, one-hand set-up
|
|
- Magnetic base with triple-jointed arm and fine adjustment
- Starrett catalog number 660
- Positive On/Off switch
- Very sensitive fine-adjustment thumb screw
|
|
- Overall height 3.75"
- Powerful permanent magnet
- Clamps on dovetail, 5/32", or 1/4" diameter stems
- Includes stem adapter and mill adapter
- Made in USA by Fisher Machine Shop
|
|
- 4mm ball
- Replacement probe tip for Tormach PN 33029
|
|
Three digital micrometer set with measuring ranges of 0-1", 1-2", and 2-3".
|
|
- Measuring range 0 to 3"
- Accuracy: +/- 0.0001" per inch
- Graduation interval 0.0001"
- Thimble style: friction or ratchet
- Hardened and ground carbide anvil
|
|
- Solid metal C-shape frame for all sizes
- Graduation: 0.0001”
- Hardened and precision ground anvil spindle thread with microlap finish on ends
|
|
- Graduation: 0.0001"
- Carbide faces
- Ratchet stop
- Spindle lock
- Fitted case
|
|
- Measurement range: 0-1"
- Resolution: 0.00005"/0.001mm
- Accuracy: 0.00015"/0.003mm
- IP65 Water, Oil & Dust Resistance
- Large LCD display
|
|
- ON/OFF button with auto off after 30 minutes of nonuse.
- Ability to zero tool at any position.
- Inch or millimeter graduations.
- Balanced frame design.
- One-piece spindle, micro-lapped carbide measuring faces.
|
|
- Starrett 0-1" micrometer
- Starrett catalog number T230XRL
- Accurate to 0.0001"
- Thousandths are numbered on inch tools for quick and easy reading
- Adjustments are easy and quick
|
|
- Made in USA by Fisher Machine Shop
|
|
- 50 2" long pin gages
- Each pin is up to 0.0002" under the marked size
- Hardened to 60-62 Rc
- Finished to 10 microinches
- Furnished in a sturdy plastic case with sizes marked
|
|
- 190 2" long pin gages
- Each pin is up to 0.0002" under the marked size
- Hardened to 60-62 Rc
- Finished to 10 microinches
- Furnished in a sturdy plastic case with sizes marked
|
|
This plastic case holds a standard 1" dial indicator and magnetic base. It is the same case that comes with our 1782 set.
|
|
- Stainless steel rule blades with inch and metric markings
- Strong metal lockingnut
- Large LCD displays degrees with measuring range: 0 - 360°
- Resolution: 0.05°, Resolution: 0.05°, Repeatability: 0.05°
- Battery: 3V CR2032 included
|
|
- Measures angles from 0 to 180°
- Head is 3.3" x 2"
- 6" arm can be locked in any position with knurled lock nut
- Made of tempered steel with satin chrome finish
|
|
- Starrett steel protractor (0-180°), 6" blade, rectangular head
- Starrett catalog number C183
- Double graduations from 0-180° in two directions
- The blade can be locked firmly at any angle by the lock nut
- Satin chrome finish for ease of reading and resistance to rust
|
|
- Measures angles from 0 to 180°
- Semi-circular head is 3.3" x 2"
- 6" arm can be locked in any position with knurled lock nut
- Made of tempered steel with satin chrome finish
|
|
|
- Measures angles from 0 to 180°
- Semi-circular head is 3.3" x 2"
- 6" arm can be locked in any position with knurled lock nut
- Made of stainless steel
|
|
- Set of 25 radius gages and holder
- 1/64" to 17/64" radius by 64ths
- 9/32" to 1/2" by 32nds
- Satin chrome finish
- Five gaging surfaces on each gage for both concave and convex radii
|
|
- Starrett 25 piece radius gage set
- Starrett catalog number S167CHZ
- Radii Range: 1/64-17/64" 9/32-1/2"
- Increments: 64ths, 32nds
- Rust and stain resistant satin finish stainless steel
|
|
|
- 0.2" ball
- replacement probe tip for Tormach PN 32897
|
|
- 4R graduations, 8ths & 16ths, 32nds & 64ths
- Made from the finest quality steel available
- Fully hardened and tempered with stain chrome finish
- Precisely etched, then black filled for readability
- Rule is 1/2" wide and 0.015" thick
|
|
- 4R graduations, 8ths & 16ths, 32nds & 64ths
- Made from the finest quality steel available
- Fully hardened and tempered with stain chrome finish
- Precisely etched, then black filled for readability
- Rule is 1" wide and 0.040" thick
|
|
- 5R graduations, 32nds, 64ths, 10ths, 100ths
- Made from the finest quality steel available
- Fully hardened and tempered with stain chrome finish
- Precisely etched, then black filled for readability
- Rule is 1/2" wide and 0.015" thick
|
|
- 150 mm (5 3/4") No. 31 graduations rule.
- Full-flexible steel.
- Graduated 150 mm end-to-end on mm edges and to 5-3/4" with a blank end on the inch edges.
- 1/2" wide and 1/64" thick.
|
|
- Metric graduations, 1.0 mm & 0.5 mm both sides
- Made from the finest quality steel available
- Fully hardened and tempered with stain chrome finish
- Precisely etched, then black filled for readability
- Rule is 1/2" wide and 0.015" thick
|
|
- Metric graduations, 1.0 mm & 0.5 mm both sides
- Made from the finest quality steel available
- Fully hardened and tempered with stain chrome finish
- Precisely etched, then black filled for readability
- Rule is 1" wide and 0.040" thick
|
|
- English/metric graduations, 0.5 mm & 32nds, mm & 64ths
- Made from the finest quality steel available
- Fully hardened and tempered with stain chrome finish
- Precisely etched, then black filled for readability
- Rule is 1/2" wide and 0.015" thick
|
|
- English/metric graduations, 0.5 mm & 32nds, mm & 64ths
- Made from the finest quality steel available
- Fully hardened and tempered with stain chrome finish
- Precisely etched, then black filled for readability
- Rule is 3/4" wide and 0.040" thick
|
|
- 4R graduations, 8ths & 16ths, 32nds & 64ths
- Made from the finest stainless steel available
- Fully hardened and tempered with black chrome finish
- Precisely etched, then white filled for readability
- Rule is 1/2" wide and 0.015" thick
|
|
- 4R graduations, 8ths & 16ths, 32nds & 64ths
- Made from the finest quality steel available
- Fully hardened and tempered with stain chrome finish
- Precisely etched, then black filled for readability
- Rule is 1/2" wide and 0.015" thick
|
|
- 6" 4R graduation rule
- Full-flexible steel
- Graduation No. 4R - 8ths, 16ths, quick-reading 32nds and 64ths
- 1/2" wide and 1/64" thick
|
|
- 4R graduations, 8ths & 16ths, 32nds & 64ths
- Made from the finest quality steel available
- Fully hardened and tempered with stain chrome finish
- Precisely etched, then black filled for readability
- Rule is 3/4" wide and 0.040" thick
|
|
- 4R Graduations - 8ths, 16ths, quick-reading 32nds and 64ths.
- Spring-tempered 6 inch steel ruler
- Rule is 3/4" wide and 3/64" thick
- Satin chrome finish
|
|
- 5R graduations, 32nds, 64ths, 10ths, 100ths
- Made from the finest quality steel available
- Fully hardened and tempered with stain chrome finish
- Precisely etched, then black filled for readability
- Rule is 1/2" wide and 0.015" thick
|
|
- 6" 5R graduation rule
- Full-flexible steel
- Graduation No. 5R - quick-reading 10ths, aircraft quick-reading 100ths, 32nds and 64ths.
- 1/2" wide and 1/64" thick
|
|
- Hardened and Tempered Tool Steel
- Graduation 32nds & 0.5 mm
- This rule is 7/32" wide and 0.04" thick
- Furnished with Adjustable Hook
|
|
|
- Made from the finest quality steel available
- Fully hardened and tempered with stain chrome finish
- Precisely etched, then black filled for readability
- Flexible rules are 1/2" wide and 0.015" thick
- Rigid rules are 3/4" wide and 0.040" thick
|
|
Starrett precision steel rules are machine-divided, not photoengraved. They are inspected to Starrett Master Standards, which are traceable to the National Institute of Standards and Technology.
Graduation No. 4R are 8ths, 16ths, quick-reading 32nds and 64ths.
Graduation No. 16R are Quick-reading 32nds and 64ths, aircraft quick-reading 50ths and 100ths.
Graduation No. 5R are quick-reading 10ths, aircraft quick-reading 100ths, 32nds and 64ths.
Graduations No. 31 are 32nds and 64ths on one side; mm and 1/2 mm on reverse.
Flexible rules are 1/2" wide and 1/64" thick.
Rigid rules are 3/4" wide and 3/64" thick.
|
|
- #1 to 5/16" thread sizes
- Quickly identify unified and American threads
- NC, NF, and NS threads
- Made in USA
|
|
- 8 mm to 14 mm thread sizes
- Quickly identify ISO metric threads
- Coarse, medium, and fine threads
- Made in USA
|
|
- 2 mm to 7 mm thread sizes
- Quickly identify ISO metric threads
- Coarse, medium, and fine threads
- Made in USA
|
|
- Screw pitch gage with 16 leaves
- Measures 29° Acme threads from 1 - 12 TPI
- Each blade clearly marked with thread size
- Blades are protected in sturdy steel case
- 3" leaf (blade) length with locking device
|
|
- Screw pitch gage with 30 leaves
- Measures 60° threads from 4 - 42 TPI
- Each blade clearly marked with thread size
- Blades are protected in sturdy steel case
- Locking device at both ends of case
|
|
- Screw pitch gage with 51 leaves
- Measures 60° threads from 4 - 84 TPI
- Each blade clearly marked with thread size
- Blades are protected in sturdy steel case
- Locking device for each set of leaves
|
|
- Screw pitch gage with 51 leaves
- Measures 60° threads from 4 - 84 TPI
- Each blade clearly marked with thread size
- Blades are protected in sturdy steel case
- Locking device for each set of leaves
|
|
- Screw pitch gage with 51 leaves
- Measures 60° threads from 4 - 84 TPI
- Each blade clearly marked with thread size
- Blades are protected in sturdy steel case
- Locking device for each set of leaves
|
|
- Screw pitch gage with 28 leaves
- Measures 60° threads from 4 - 56 TPI and 0.50 - 6.00 mm
- Each blade clearly marked with thread size
- Blades are protected in sturdy steel case
- Locking device at both ends of case
|
|
- Screw pitch gage with 28 leaves
- Measures 60° threads from 0.25 - 2.50 mm
- Each blade clearly marked with thread size
- Blades are protected in sturdy steel case
- Locking device at both ends of case
|
|
- Screw pitch gage with 28 leaves
- Measures 60° threads from 0.25 - 2.50 mm
- Each blade clearly marked with thread size
- Blades are protected in sturdy steel case
- Locking device at both ends of case
|
|
- Screw pitch gage with 28 leaves
- Measures 60° threads from 0.25 - 2.50 mm
- Each blade clearly marked with thread size
- Blades are protected in sturdy steel case
- Locking device at both ends of case
|
|
- 1/4" diameter handle
- Nickel plated steel
- Knurled handle
- Hardened tip is finely tapered
- Tip can be revered and telescoped into handle
|
|
Starrett hand scriber.
Starrett catalog number 70B.
The 3/8" diameter handle is of steel, knurled, and nickel plated. The scriber point is steel, properly hardened and finely tapered so that the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon head prevents rolling.
The scriber point is shipped reversed in the handle so the point is protected.
|
|
|
|
- 4 small hole gages with 0.125" to 0.500" range
- Full spherical ball for very accurate measurements
- Hardened, satin-chrome plated measuring faces
- Furnished in plastic pouch
|
|
- 4 small hole gages with 0.125" to 0.500" range
- Extra long for gaging deep holes and slots
- Hardened, satin-chrome finish
- Furnished in fitted vinyl case
- Size adjustment by knurled knob
|
|
- Starrett 4- piece small hole gage set
- Starrett catalog number S829EZ
- Range of 0.125-0.500" (3.2-12.7 mm)
- Hardened-ball measuring surface with two-point contact
- Smooth, sensitive adjustment for better feel, giving more accurate measurements
|
|
- 6" rigid steel rule
- 32nds & 64ths graduations
- Hardened stainless steel
- Rule is 1/2" wide and 0.020" thick
- Convenient pocket clip
|
|
- For measuring holes, slots and recesses
- Measures holes from 5/16" to 2 1/8" diameter
- Double action is self-centering
- Satin chrome finish
- Contact ends are hardened and ground
|
|
- Starrett telescoping gage set
- Starrett catalog number S579GZ
- Range: Four gages, 5/16" to 2-1/8"
- Handles are approximately 2-3/8" long
- Contains two telescoping contacts
|
|
- For measuring holes, slots and recesses
- Measures holes from 5/16" to 6" diameter
- Double action is self-centering
- Satin chrome finish
- Contact ends are hardened and ground to the radius of the smallest diameter
|
|
- For measuring holes, slots and recesses
- Measures holes from 5/16" to 6" diameter
- Double action is self-centering
- Satin chrome finish
- Contact ends are hardened and ground
|
|
- For measuring holes, slots and recesses
- Measures holes from 5/16" to 6" diameter
- Double action is self-centering
- Satin chrome finish
- Contact ends are hardened and ground
|
|
- Starrett telescoping gage set
- Starrett catalog number S579HZ
- Range: Six gages with a range of 5/16" to 6"
- Handle lengths are 2-3/8" to 3-1/4"
- Two telescoping contacts
|
|
- Z-Limit brand guarantees professional quality
- Clamping diameter range of 1-3/8" to 2"
- Length from the center of the clamp to the indicator can be up to 6-1/2"
- Clamps to the outside of an end mill holder and does not disturb the working tool
|
|
- Designed to hold dovetailed test indicators or 1/4" straight shanks
- 3 different clamping dimensions: 1/4", 3/8" & 1/2" for various collet sizes
- reaches anywhere within a 8" diameter and fine-adjusts approximately 3/8"
- Test indicator NOT INCLUDED
|
|
- 32 Leaves, 3-7/8" length
- Range 0.0015-0.035" (0.04 - 0.88mm)
- Each blade is marked with thickness
- Manganese steel w/satin chrome finish
- Locking device
|
|
- 26 Tapered Leaves, 1/2 - 1/4 x 3-1/32"
- Range .0025-.025"
- Leaf Thickness (Inches): .0015 to .025
- Tempered-steel.
- Locking device. Leaves easily removed or replaced.
|
|
- More robust than plastic checkers
- Each size has a nut and bolt checker on the same gauge with the sizes etched on each gage
- The individual gauges rotate freely on the wire cable for fast thread verification
- All on a convenient wire cable with a loop for hanging
|
|
- 48 piece pro-series thread wire measuring set in 16 sizes
- Measure all 60 degree threads, threads from 3-48 TPI and 0.5 mm - 6 mm
- Kit includes 4 wire holders
- Chart included for US 60 degree threads and 60 degree metric
- Comes in a sturdy packing box.
|
|
- Starrett toolmaker grade stainless steel square
- Starrett catalog number 3020-3
- Blade length 2 31/32"
- Beam length 1 31/32"
- Squareness accuracy to .0002" (0.005mm) for every 6" (150mm)
|
|
- Starrett toolmaker grade stainless steel square
- Starrett catalog number 3020-4
- Blade length 3 31/32"
- Beam length 2 31/32"
- Squareness accuracy to .0002" (0.005mm) for every 6" (150mm)
|
|
- Starrett toolmaker grade stainless steel square
- Starrett catalog number 3020-6
- Blade length 5 29/32"
- Beam length 3 29/32"
- Squareness accuracy to .0002" (0.005mm) for every 6" (150mm)
|
|
This wiggler center finder set comes with 4 probes for finding centers, edges, and indicating. Each probe snaps into the body without removing the collet nut.
The wiggler shank is 0.375" diameter.
|
Belt & Disk Sander, 1" x 30" Belt & 5" Disc
