Gifts Any Machinist Can Use

Gifts Any Machinist Can Use - LittleMachineShop.com

Finding a gift for a machinist can be a challenge. We’ve compiled a list of items that any machinist would be pleased to receive as a gift. These gift items can be used with any machine, so you don’t need to worry about compatibility with a particular lathe or milling machine model number. And many of these gifts are items that everyone can use a few of, so it’s okay if the lucky gift recipient already has one.

1820 Center Punches, Starrett

Sizes 1/16”, 5/64”, 3/32”, 1/8”, and 5/32” diameter
Hardened and tempered steel
Knurled finger grip
Points ground at proper angle for maximum service
Tips are accurately centered

Starrett Center Punches with round shanks. Set of 5, Nos. 117AA, A, B, C, D in Plastic Case Starrett catalog number S117PC. This center punch set includes the following sizes, measured at the top of the tapered point: 1/16”, 5/64”, 3/32”, 1/8”, and 5/32” diameter. Starrett No. 117 Center Punches are made of specially selected steel, hardened and properly tempered. They are well proportioned, nicely finished and have a knurled finger grip. The points are ground at the proper angle to give maximum service, and the tips are accurately centered. These punches are universally used, but most often by machinists. They are well-proportioned for ease of use. The specially selected tool steel is hardened and tempered to the proper hardness. All of them feature nicely knurled finger grips for ease of handling. A special tempering process makes the head less likely to fracture from a hard, off-center blow. ALWAYS WEAR SAFETY GLASSES WHEN USING STRIKING AND STRUCK TOOLS.

2738 Combination Square Set, 12" 4R, PEC

12" Combination square
Hardened and tempered
4R graduations, 8ths & 16ths, 32nds & 64ths
Protractor graduated 0-180 degrees in both directions
Includes level vial and hardened scribe tool

Combination square with 12" machinist's blade, square/miter head, protractor head, and center head. Easy to read satin chrome finish blade is fully hardened and tempered. 4R graduations, 8ths & 16ths, 32nds & 64ths. Protractor graduated 0-180 degrees in both directions. Heads have hammertone powder-coat finish. Square/miter head includes level vial and hardened scribe tool. Combination square made in the US by Products Engineering Corporation (PEC).

3589 Combination Square Set, 12" 4R, Starrett

Starrett 12" combination square set
Includes square head, center head and reversible protractor head
Starrett catalog number C435-12-4R
Graduation No. 4R- 8ths, 16ths, Quick Reading 32nds, 64ths

The combination square set has reversible lock bolts, scriber, spirit level in both square head and protractor head, direct reading double 180° protractor scale, hardened steel, photoengraved blade. Cast iron heads with black wrinkle finish. The blade is 1" wide and 3/32" thick and has a satin chrome finish.

1830 Dial Caliper, 6", Starrett

Starrett 6” white dial caliper and fitted case
Direct reading, reliable and accurate.
American Made

This is one of the handiest measuring tools available, used by mechanics and toolmakers everywhere. It is direct reading, reliable, and accurate. The Starrett 120 Series dial calipers are the only American made dial calipers on the market. Starrett catalog number 120A-6.

4281 Dial Indicator, 1" x 0.001", Professional Grade, Shock Resistant

Z-Limit brand guarantees professional quality
0-1" dial indicator with 0.001" resolution
6 jewel shock resistant movement
2.25" dial diameter AGD Group 2 with 0.375" shank and flat back
Calibration certificate included

This 1" stroke dial indicator features large, easy to read numbers and crisp graduations. Each revolution is 0.100", indicated by the revolution counter. The resolution is 0.001". The thread for the tip is #4-48. Includes a durable plastic case. This indicator is made and inspected in the same factory as some of Europe's best-known brands.

1835 Dial Indicator, 1", Starrett

Range: 1.000"
Face diameter: 2-1/4"
Graduations: 0.001"
Shockless, hardened steel gear train and jewel bearings
Lug on center of the back

Starrett catalog number 25-441J. These indicators have a shockless, hardened steel gear train and jewel bearings. They are furnished with a lug on the center of the back. This is an AGD Group 2 indicator with a 2.25" Diameter face, 0.375" shank, and #4-48 tip thread.

1782 Dial Indicator, Magnetic Base & Point Set

0-1" dial indicator with 0.001" resolution
Magnetic base indicator holder with fine adjustment
22 piece indicator point set
All in a plastic case

This 1" stroke dial indicator features large, easy to read numbers and crisp graduations. Each revolution is 0.100", indicated by the revolution counter. The resolution is 0.001". There is a mounting lug on the back of the case. This is an AGD Group 2 indicator with a 2.25" Diameter face, 0.375" shank, and #4-48 tip thread. The magnetic base indicator holder has a fine adjustment feature. The on/off switch makes it easy to position. The v-groove base allows you to mount it on cylindrical surfaces. Includes a 22 piece indicator point set and a plastic case.

1819 Dial Indicator, Starrett Last Word

Starrett dial indicator with universal friction holder with shank
Graduation: 0.0005"
Range: 0.030"
Dial Reading: 0-15-0

Starrett catalog number 711LPSZ. Steel Contact Point Length: 5/32" (4 mm) Steel Contact Point Ball Diameter: 0.120" (3 mm) These handy test indicators are among the most versatile available. Their small size and variety of attachments handle all jobs with ease and accuracy. A very useful feature is the shaded dial - when used with a mirror, such as in a jig bore application, the operator always knows where he is.

2925 Dial Indicator, Test Indicator, Magnetic Base & Point Set

0-1" dial indicator with 0.001" resolution
0-15-0 dial test indicator with 0.0005" resolution
Magnetic base indicator holder with fine adjustment
22 piece indicator point set
All in a plastic case

The 1" stroke dial indicator features large, easy to read numbers and crisp graduations. Each revolution is 0.100", indicated by the revolution counter. The resolution is 0.001". There is a mounting lug on the back of the case. This is an AGD Group 2 indicator with a 2.25" Diameter face, 0.375" shank, and #4-48 tip thread. The dial test indicator has 0.0005" graduations and a 7 jewel movement. Its range is 0.030" in either direction. Includes 5/32" and 3/8" diameter posts, dovetails on the back and end, and an 0.080" diameter point. The magnetic base indicator holder has a fine adjustment feature. The on/off switch makes it easy to position. The v-groove base allows you to mount it on cylindrical surfaces. Includes a 22 piece indicator point set and a plastic case.

3522 Dial Test Indicator, 0-15-0 x 0.0005" and Universal Magnetic Base

Dial test indicator with 0.0005" graduations, range of 0.030" in either direction
Unique central locking mechanism on magnetic base locks all motion with one knob
Magnetic base has fine adjustment
Includes a fitted case

The dial test indicator features a 7 jewel movement. It includes 5/32" and 3/8" diameter posts, dovetails on the back and end, and an 0.080" diameter point. The face is 1.125" in diameter. This magnetic base is smaller than most; the base is 1.2" by 1.5". The maximum reach is 7". The on/off switch makes it easy to position, while the V-groove base allows you to mount it on cylindrical surfaces. This magnetic base is the perfect size for mini lathes and mini mills. It accepts dial indicators with 3/8" stems and dial test indicators with dovetails.

2826 Drill Set, 115 Piece Jobber Length HSS

118º Point
Surface Treated Black Finish
Jobber Length
Straight Shank
High Speed Steel

115 Piece high speed steel drill set. Set includes 1/16" - 1/2" by 64ths, A - Z, and No. 1 - 60. These are jobber length drills with straight shanks. Jobber length drills are normal length drills. Includes a metal index for storing the drills.

2831 Drill Set, 19 Piece Metric Jobber Length HSS

Made in USA
Bright finish
118º point
Jobber length
High speed steel

19 Piece metric high speed steel drill set. Set includes 1.0 mm - 10.0 mm by 0.5 mm. These are jobbers length drills with straight shanks. Jobbers length drills are normal length drills. Includes a Huot metal index for storing the drills.

3590 Drill Set, 21 Piece Jobber Length HSS, Turbomax Tip

1/16" through 3/8" by 1/64"
Revolutionary tip design stays sharper longer and drills up to 28 percent faster
Three-flatted shank design provides better chuck grip and reduces slippage
M-2 high speed steel for the best combination of strength, heat resistance, and wear resistance
Gold oxide finish.

High speed steel drill bit set with Turbo Point tip. 21-piece set in metal index case includes drill bit sizes 1/16" through 3/8" in 1/64" increments. These are jobbers length drills with three-flatted shanks on larger sizes. Jobbers length drills are normal length drills. Three-flatted shank design is ideal for use in keyless chucks.

2830 Drill Set, 29 Piece Screw Machine Length HSS

Made in USA
Surface treated black finish
Heavy duty 135º split point
High speed steel
Includes metal index

29 Piece high speed steel drill set. Set includes 1/16" - 1/2" by 64ths. These are screw machine length drills with straight shanks. Screw machine length drills are 5/8 as long as normal jobber-length drills. These shorter drill bits are useful on mini lathes and mini mills where there isn't much distance for tools. Includes a Huot metal index for storing the drills.

1821 Drive Pin Punches, Starrett

Diameters: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16"
Hardened and tempered steel
Knurled finger grip
Points ground at proper angle for maximum service
Tips are accurately centered

Starrett 8 piece drive pin punch set. Set of 8, Nos. 565A/B/C/D/E/F/G/H in a round container. Starrett catalog number S565WB. This set includes the following diameter punches: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16". Starrett No. 565 Drive Pin Punches are well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. These punches are universally used, but most often by machinists. They are well-proportioned for ease of use. The specially selected tool steel is hardened and tempered to the proper hardness. All of them feature nicely knurled finger grips for ease of handling. A special tempering process makes the head less likely to fracture from a hard, off-center blow. ALWAYS WEAR SAFETY GLASSES WHEN USING STRIKING AND STRUCK TOOLS.

4251 Electronic Digital Caliper, 6" Professional Grade

Z-Limit brand guarantees professional quality
Large, easy-to-read LCD display can be zeroed at any position
Automatic shut-off after 5 minutes of non-use, last measuring position retained when shut off
Hardened stainless steel body for long life, with fine adjustment thumb wheel
Resolution is 0.0005" (0.01mm) and linear accuracy meets DIN 862 standard

This 6" electronic digital caliper is made and inspected in the same factory as some of America's best-known brands. The 6" digital Vernier caliper measures four ways; outside, inside, depth, and step. The three keys are on/off, inch/mm, and zero. Jaw Depths: 1 1/2" outside, 5/8" inside. The CR-2032 battery is included. Includes a durable plastic case.

2752 Electronic Digital Caliper, 6", Starrett 799

Large, easy-to-read LCD display can be zeroed at any position
Automatic shut-off after 5 minutes of nonuse, last measuring position retained when shut off
Hardened stainless steel body for long life
Fine adjustment thumb wheel
Resolution is .0005" (0.01mm) and linear accuracy meets DIN 862 standard

Starrett 6” electronic digital caliper Starrett catalog number 799A-6/150 Starrett's 799 series electronic calipers are light, comfortable, easy to use, and constructed with features that have made Starrett slide calipers the machinist's first choice for many years. They have a slim, streamlined profile, function buttons for zero and inch/mm, a large, clear, easy-to-read LCD display, and long battery life. The 799 Calipers are furnished in a fitted, protective case. Jaw Depths: 1 1/2" outside, 5/8" inside.

1675 Gift Certificate, $100
LittleMachineShop.com gift certificates make great gifts. Now you know exactly what to give, and you don't need to worry about whether or not it fits. If you'd like a certificate in a higher amount, order multiple certificates that add up to the amount you want, and in the Special Instructions, include a note asking us to combine them into a single certificate. (For example, if you want to give $250 to someone you really like, order five $50 certificates. Include a note and we'll issue a single certificate for the full amount.)

1673 Gift Certificate, $25
LittleMachineShop.com gift certificates make great gifts. Now you know exactly what to give, and you don't need to worry about whether or not it fits. If you'd like a certificate in a higher amount, order multiple certificates that add up to the amount you want, and in the Special Instructions, include a note asking us to combine them into a single certificate. (For example, if you want to give $250 to someone you really like, order five $50 certificates. Include a note and we'll issue a single certificate for the full amount.)

1674 Gift Certificate, $50
LittleMachineShop.com gift certificates make great gifts. Now you know exactly what to give, and you don't need to worry about whether or not it fits. If you'd like a certificate in a higher amount, order multiple certificates that add up to the amount you want, and in the Special Instructions, include a note asking us to combine them into a single certificate. (For example, if you want to give $250 to someone you really like, order five $50 certificates. Include a note and we'll issue a single certificate for the full amount.)

3562 Hacksaw Frame, Heavy Duty, Starrett

Starrett Closed Grip Heavy Duty High-Tension Hacksaw Frame
Starrett catalog number K145
12" (300mm) frame
4-3/8" (110mm) throat depth

The K145 is a rugged, professional quality high-tension frame constructed of cast aluminum with an extra-thick tubular steel bar for added strength. The steel tube also provides on-hand storage for spare blades. The K145 High-Tension Frame is engineered for use with Starrett bi-metal Bluestripe® and Greenstripe® blades. With just three 360° turns, the easy to use adjusting screw will tension the blade up to 28,000 psi (2,000kg/cm) which prevents the blade from twisting and binding when bearing down on the cut. Each K145 Heavy Duty High-Tension Frame is shipped with a Starrett Bluestripe bi-metal unique ground tooth hacksaw blade.

2742 Machinist Square Set, PEC

Includes 2", 3", 4" and 6" squares
Made from high quality tool steel
True right angles inside and outside
Beams and blades are precision ground
Hardened Blade

Set of four machinist squares made of high quality tool steel in sizes 2", 3", 4", and 6". These squares are made in the US by Products Engineering Corporation (PEC). These squares are square within 0.0006" over the length of the blade. The two sides of the blades and beams are parallel within 0.0005" over their length. Length of blade is measured from inner edge of beam to end of blade. The small notch at the inside corner prevents small particles from accumulating at the juncture and impacting the squares reading. Typical use involves aligning the beam along one edge of an object with the blade across the body of the work. Using a strong light source behind the square will reveal any gaps showing the squareness of the work.

2907 Machinists Jack Set

Machinists jack
Two extension bases
Auxiliary pointed screw
Inner and outer V bases
1" diameter, 1.5" to 2.3" tall

Machinists jacks are used to support odd sized or odd shaped objects. Use them to support the ends of long workpieces that extend beyond your vise jaws. Use them to support the edges of items that you are clamping with your clamping kit. The machinist's jack includes lots of parts that you can mix and match to meet your needs.

3180 Micrometer, 0-1", Starrett

Starrett 0-1" micrometer
Starrett catalog number T230XRL
Accurate to 0.0001"
Thousandths are numbered on inch tools for quick and easy reading
Adjustments are easy and quick

The Starrett 0-1" micrometer is the jewel of precision tools used by skilled workmen worldwide. The spindle and anvil are sized at .235" (6mm) to reach places most micrometers cannot reach. The balanced frame and thimble design ensure easy handling and better readability. A ring-type knurled lock nut provides quick and sure locking. The combination ratchet and speeder provides uniform pressure and quicker adjustment. A gracefully designed tapered frame allows use in narrow slots and tight places. The Starrett T230XRL micrometer has a rigid one-piece frame of drop forged steel and an extremely hard and stable one-piece spindle (the heart of the accuracy). It features micro-lapped measuring faces, quick and easy adjustment, plus Starrett workmanship.

3560 Pocket Level, Starrett

Starrett 3.5" pocket level
Starrett catalog number 135B
3.5" (88 mm) long
Satin nickel plated finish

This is an extremely useful Starrett level that fits handily in the pocket with no sharp edges. Made from hexagonal stock with convex ends and satin nickel-plated finish.

4423 Safety Glasses

Strong, lightweight clear polycarbonate lens with 11 degree base curve
Treated with our exclusive Duramass scratch resistant and anti-fog coatings
Non-slip rubber head grips and temple sleeve designed for breakaway cord
Twin bridge adjustable nose piece

The safety glasses feature safety and style at an affordable. The metal frame with spring hinge temples, 11 degree base curve lens and twin bridge adjustable nose piece keeps you at the peak of comfort and style all day long. Lightweight metal frame with extreme flexibility. Non-slip temple sleeves designed for use with breakaway cord. Twin-bridge adjustable nose piece with gel nose pads. Meets or Exceeds ANSI Z87.1 Safety Standards. Always wear safety glasses when working in your shop.

3029 Screw Checker, Inch, PEC

#1 to 5/16" thread sizes
Quickly identify unified and American threads
NC, NF, and NS threads
Made in USA

Screw checkers provide a quick way to measure standard threads. They provide all the information you need for screws; diameter, length, threads per inch, hole size and even tap drill sizes.

1824 Scriber with 2-3/8" Point, Starrett

1/4" diameter handle
Nickel plated steel
Knurled handle
Hardened tip is finely tapered
Tip can be revered and telescoped into handle

Starrett hand scriber. Starrett catalog number 70A. The 1/4" diameter handle is of steel, knurled, and nickel plated. The scriber point is steel, properly hardened and finely tapered so that the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon head prevents rolling. The scriber point is shipped reversed in the handle so the point is protected.

3968 Shop Apron

5 pockets designed for metalworking tools

We had these aprons custom-made to our design out of heavy-duty denim.

3896 SpillMaster Container

Avoid workbench spills
Holds cutting fluids and lubricants
Will NOT spill, even when upside down
Durable polyethylene for long life
Spill proof container includes applicator brush

The SpillMaster is a great way to keep cutting fluid handy on your workbench. The included acid brush makes application easy. *NOTE* SpillMasters come with Red, Blue, and White tops. We ship the colors randomly based on availability. If you want a particular color, put a note in the Special Instructions box on your order. We'll accommodate your request if we have that color in stock.

2621 Tap Wrench 3-5/8", Starrett

Body length: 3-5/8" (90mm)
Capacity tap size: No. 0-14
Square shank: 1/4" (6.35mm)
Starrett catalog number 174

This is a well-designed tap wrench, ideal for holding smaller diameter taps, drills, reamers, and other tools up to 1/4" (6.35 mm) in diameter. It works with 0-14 tap sizes. It will firmly grip round or square shanks, is lightweight and well proportioned. The gripping surface is properly heat treated to withstand any ordinary use.