Vises

Milling Vises - LittleMachineShop.com

LittleMachineShop.com has a full range of vises for your mini mill. Choose from economical quick vises, toolmaker's vises, screwless vises, and precision milling vises. No matter what your need, we have a vise to match it.

3524 4" Angle Vise W/ 2-Way Swivel Movement

360 degree horizontal swivel movement
90 degree vertical swivel movement
Enclosed acme thread screw & hardened and ground jaws.
Positive locking to withstand heavy loads
Vise handle included

4" 2-Way Swivel Movement Angle Vise with positive locking in order to withstand heavy loads. The base has full 360 degree swivel movement, while the vertical swivel movement has a range of 90 degrees The base slot width is 0.71". Depth of jaws is 1.69". Opening of jaws is 3.2". Angle height is 5.7". Overall length is 12.2". Maximum width is 7.1".

2045 Swivel Base, 3" Precision Milling, Heavy

Detachable swivel base features easy to read divisions
Ground top and bottom

This swivel base fits our 3" Precision Milling Vise, Heavy

2239 Swivel Base, 4" Precision Milling, Heavy

Detachable swivel base features easy to read divisions
Ground top and bottom

This swivel base fits our 4" Precision Milling Vise, Heavy

3142 Vise, 1" Screwless, Built-in Parallels

Notches in jaws provide built-in parallels
Jaw opening capacity is 1"
Hardened to RC 58-62

This high precision toolmakers screwless vise has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square, and parallel to 0.0002". The jaws are 3/8" deep and open to 1". The vise is 2-5/8" long x 1" wide. Built in parallels are 2.75mm(0.11in) below top of jaws.

3949 Vise, 1" Screwless, Square Jaws

Square jaw edges are good for gripping small parts
Hardened and precision ground
Rapid positioning notches
.0002" square and parallel

3950 Vise, 1.5" Screwless

Hardened and precision ground
Jaw can be opened and closed without unbolting from work surface
1.5" jaw width
Square and parallel .0002"
Overall length is 100 mm

This high precision toolmakers screwless vise has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square, and parallel to 0.0002". The jaws are 0.75" deep and open to 1.5". The vise is 3.94" long x 1.5" wide.

1591 Vise, 2" Screwless

Precision ground and hardened
Rapid positioning notches
Ground v-way in sliding jaw
Overall length is 5.32"

This high precision toolmakers screwless vise has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square, and parallel to 0.0005". There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects. The jaws are 25 mm (0.98") deep and open to 61 mm (2.39"). The vise is 135 mm (5.32") long x 50 mm (1.97") wide x 50 mm (1.97") high.

5590 Vise, 3" CNC Mill

Lock down type
Compact size allows multiple vises on CNC mill table
Flatness of all sides within 0.001"
Mount upright, or on left or right sides
Sides parallel within 0.0005" in 4"

This vise is designed for CNC milling machines where a swivel base is never required. The compact size allows you to mount multiple vises on the CNC mill table so you can machine several items in one setup. The vise closes with up to 3000 lbs. of clamping force. The vise is 3.15" (90mm) wide, 9.06" (230mm) long, and 2.76" (70mm) tall. The jaws are 0.944" (24mm) deep and open 2.95" (75mm).

1647 Vise, 3" Milling

Jaw Width 3.15" (80.0 mm)
Jaw Depth 1.18" (30.0 mm)
Swivel Base
Maximum Jaw Opening 2.56" (65.0 mm)

This 3" milling vise is good for general mill work.

2500 Vise, 3" Precision Milling

Detachable swivel base
360 degree rotation
Ground and hardened jaws
Jaw width 3.15" (80 mm)
Jaw depth 0.93" (23.5 mm)

Precision 3" Kurt-style milling vise with swivel base. The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground. The jaws of this precision milling vise are hardened and ground. The detachable swivel base allows 360 degree rotation of the vise.

3969 Vise, 3" Precision Milling Plus Parallels and Mounting Kit

3" Precision milling vise
3" Long, 11-piece thin parallel set
Vise mounting kit
Compatible with mini mills
All parts are hardened

The precision 3" Kurt-style milling vise includes a swivel base. The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground. The jaws are hardened and ground. The detachable swivel base allows 360 degree rotation of the vise. The vise jaws are 3.1" wide, 1.0" deep, and open 2.85". The vise is 10" long. Without the base, the vise is 2.87" high. With the base, the vise is 3.87" high. Without the swivel base, the ways of the vise are parallel to the base of the vise within 0.0006" in 4". The jaws are perpendicular to the ways within 0.002" in 4". With the swivel base installed, the ways of the vise are parallel to the base of the vise within 0.0008" in 4". The set of 11 pairs of thin parallels are 1/8" thick and 3" long. The heights are 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" with two pairs of shims are 9/64" and 5/32". They are made of high grade alloy steel hardened to 52 to 58 Rc. The top and bottom surfaces are parallel within 0.0002". The pairs are matched in height within 0.0004". The vise mounting kit contains the items needed to mount the milling vise on a mini mill. The T-slot nuts fit 7/16" (12 mm) T-slots. All the parts are hardened for long life. The vise mounting kit includes 2 each studs, T-slot nuts, flange nuts, and hardened washers.

2024 Vise, 3" Precision Milling, Heavy, No Swivel Base

Precision 3" Kurt-style milling machine vise
No swivel base
Hardened replaceable jaws
The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground
30% Downward Locking Force

3" High quality Kurt-style milling vise. Top, gib, jaws, bottom of vise bed and all plate mounting surfaces are precision ground. The angle tight positive locking style and wide jaw opening allows for holding a large array of workpieces securely. The hardened and ground jaws are made to American standard dimensions (interchangeable with Kurt) and provide a flat and parallel gripping surface that ensures accurate and consistent clamping. The jaws can be mounted on either end of the fixed and movable jaw providing a wide range of clamping distances. Overall length is 10.85" and the height is 3.05". Jaws are 3.15" wide, 1.04" deep, open 3", and are perpendicular to the ways within 0.002" in 4". The ways are parallel to the base within 0.0006" in 4".

1699 Vise, 3" Precision Milling, Heavy, with Swivel Base

Precision 3" Kurt-style milling machine vise
Detachable swivel base features easy to read divisions
Hardened replaceable jaws
The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground
30% Downward Locking Force

3" High quality Kurt-style milling vise with detachable 360° swivel base and easy to read divisions. Top, gib, jaws, bottom of vise bed and all plate mounting surfaces are precision ground. The angle tight positive locking style and wide jaw opening allows for holding a large array of workpieces securely. The hardened and ground jaws are made to American standard dimensions (interchangeable with Kurt) and provide a flat and parallel gripping surface that ensures accurate and consistent clamping. The jaws can be mounted on either end of the fixed and movable jaw providing a wide range of clamping distances. Overall length is 10.85” and the height is 3.05” without base, and 4.21” with base. Jaws are 3.15” wide, 0.94” deep, open 3”, and are perpendicular to the ways within 0.002” in 4”. The ways are parallel to the base within 0.0006” in 4” without the swivel.

4740 Vise, 3" Precision Milling, Professional Grade

Totally enclosed heat treated screw
High repeatability and smooth operation
Detachable swivel base features easy to read divisions
Hardened jaws

This is a very well-made precision 3" Kurt-style milling machine vise with a swivel base. The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground. The jaws are hardened and super precision ground. The detachable swivel base features easy to read divisions. The replaceable jaws can be mounted on either end of the fixed and movable jaw supports providing a wide range of clamping distances.

1590 Vise, 3" Screwless

Hardened and Precision Ground
Square and Parallel within 0.0005"
Ground "V" Way

This high precision toolmakers screwless vise has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square and parallel to 0.0005". There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects. The jaws are 1.38" deep and open to 3.78" capacity. The vise is 7.28" long, 2.76" tall and 2.875" wide.

3763 Vise, 3" Screwless plus Parallels and Mounting Clamps

3" (80 mm) wide high-precision screwless vise
11 Pairs of 3" long thin parallels
Two mounting clamps to secure the vise to your mill table
Vise and parallels are hardened to RC 58-62

This high precision toolmakers screwless vise has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002". There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects. The jaws are 1.38" deep and open to 3.78" capacity. The vise is 7.28" long, 2.76" tall and 3.00" wide. The set of 11 pairs of thin parallels are 1/8" thick and 3" long. The heights are 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" with two pairs of shims are 9/64" and 5/32". They are made of high grade alloy steel hardened to 52 to 58 Rc. The top and bottom surfaces are parallel within 0.0002". The pairs are matched in height within 0.0004". The pair of clamps is used to mount a screwless vise on your mill table. You furnish T-slot nuts and socket head cap screws (up to 3/8" diameter) of the appropriate length for your mill. These clamps are height-adjustable so they will work with any screwless vise with 8 mm (5/16") or larger holes. You can also use these clamps in the slots that are in the end of most screwless vises

1756 Vise, 3" Screwless Sine

Sine range: 0-60°
Hardened and precision ground
Tolerance of .0004" center to center
Jaw can be opened or closed without unbolting from work surface

3" Precision screwless sine vise. Jaw width is 2.9" (73 mm), jaw depth is 1.4" (35 mm), jaw opening is 4" (100 mm). The base size is 7" x 2.9" (190 mm x 73 mm) The center distance of the cylinders is 100.00 mm. Hardened and precision ground to a tolerance of .0004” for both parallelism and squareness. Sine range: 0 - 60°. Jaw can be opened or closed without unbolting vise from work surface.

2356 Vise, 3" Screwless with Clamping Slots

Clamp to the mill table using the proper clamping kit for your mill.
Overall length is 7-.72"
Jaw opening capacity is 3.94"
Hardened to RC 58-62

4871 Vise, 3" Screwless with Clamping Slots - BLEMISHED

These vises have blemishes--cosmetic defects but function normally

3767 Vise, 3" Screwless with Hold Down Clamps

High precision 3" wide screwless vise
Clamps to secure to vise to your mill table
Vise is hardened and precision ground
Jaw opening capacity is 3.78"
Clamps are height adjustable

This high precision screwless vise with hold down clamps has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002". There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects. The jaws are 1.38" deep and open to 3.78" capacity. The vise is 7.28" long, 2.76" tall and 3.00" wide. The pair of clamps is used to mount this toolmakers vise on your mill table. You furnish 3/8" socket head cap screws of the appropriate length for your mill, and T-slot nuts. These clamps are height-adjustable so they will work with any screwless vise with 8 mm (5/16") or larger holes. You can also use these clamps in the slots that are in the end of most screwless vises.

4216 Vise, 3" Sine Screwless & Space Block Set

3" Sine screwless vise
36 piece space block set
Vise is hardened and precision ground
Block set is precision tool steel

This package includes a 3" Precision screwless sine vise and a 36 piece space block set. Vise: Jaw width is 2.9" (73 mm), jaw depth is 1.4" (35 mm), jaw opening is 4" (100 mm). The base size is 7" x 2.9" (190 mm x 73 mm) The center distance of the cylinders is 100.00 mm. Hardened and precision ground to a tolerance of .0004” for both parallelism and squareness. Sine range: 0 - 60°. Jaw can be opened or closed without unbolting vise from work surface. Block Set: 36 piece block set, use these space blocks to set the sine vise to the correct angle. Working surfaces hardened to Rc 57-60. Four connecting screws are included to make any length desired. Made of precision tool steel and individually marked. Meets or exceeds federal specifications. Set comes in a fitted case.

3857 Vise, 4" CNC Mill

Lock down type
Compact size allows multiple vises on CNC mill table
Flatness of all sides within 0.001"
Mount upright, or on left or right sides
Sides parallel within 0.0005" in 4"

This vise is designed for CNC milling machines where a swivel base is never required. The compact size allows you to mount multiple vises on the CNC mill table so you can machine several items in one setup. The vise closes with up to 3000 lbs. of clamping force. The vise is 4.13" wide, 11.25" long, and 4" tall. The jaws are 1.5" deep and open 4".

1879 Vise, 4" Precision Milling, Heavy, No Swivel Base

Precision 4" Kurt-style milling machine vise
Ground surfaces
Jaws hardened and ground
Fixed jaw is bolted for enhanced rigidity
30% Downward Locking Force

4" High quality Kurt-style milling vise. Top, gib, jaws, bottom of vise bed and all plate mounting surfaces are precision ground. The fixed jaw is bolted from the top for enhanced rigidity. The angle tight positive locking style and wide jaw opening allows for holding a large array of workpieces securely. The hardened and ground jaws are made to American standard dimensions (interchangeable with Kurt) and provide a flat and parallel gripping surface that ensures accurate and consistent clamping. The jaws can be mounted on either end of the fixed and movable jaw providing a wide range of clamping distances. The jaws are 4" wide, 1.27" deep and open 5.5". The ways of the drill press milling vise are parallel to the base of the vise within 0.0006" in 4". The jaws are perpendicular to the ways within 0.002" in 4".

1755 Vise, 4" Precision Milling, Heavy, with Swivel Base

Precision 4" Kurt-style milling machine vise with swivel base.
Ground surfaces.
Jaws hardened and ground.
Fixed jaw is bolted for enhanced rigidity.
Detachable swivel base features easy to read divisions.

4" High quality Kurt-style milling vise. Top, gib, jaws, bottom of vise bed and all plate mounting surfaces are precision ground. The fixed jaw is bolted from the top for enhanced rigidity. The angle tight positive locking style and wide jaw opening allows for holding a large array of workpieces securely. The hardened and ground jaws are made to American standard dimensions (interchangeable with Kurt) and provide a flat and parallel gripping surface that ensures accurate and consistent clamping. The jaws can be mounted on either end of the fixed and movable jaw providing a wide range of clamping distances. The jaws are 4" wide, 1.27" deep and open 5". With the base, the vise is 9.7" wide, 13.4" long, and 4.75" high. Without the swivel base, the ways of the precision milling vise are parallel to the base of the vise within 0.0006" in 4". The jaws are perpendicular to the ways within 0.002" in 4". With the swivel base installed, the ways of the vise are parallel to the base of the vise within 0.0008" in 4".

4733 Vise, 4" Precision Milling, Professional Grade

Totally enclosed heat treated screw
High repeatability and smooth operation
Detachable swivel base features easy to read divisions
Hardened jaws

This is a very well-made precision 4" Kurt-style milling machine vise with a swivel base. The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground. The jaws are hardened and super precision ground. The detachable swivel base features easy to read divisions. The replaceable jaws can be mounted on either end of the fixed and movable jaw supports providing a wide range of clamping distances.

2061 Vise, 5" Precision Milling, Heavy, with Swivel Base

Precision 5" Kurt-style milling machine vise with swivel base.
Ground surfaces.
Jaws hardened and ground.
Fixed jaw is bolted for enhanced rigidity.
Detachable swivel base features easy to read divisions.

Heavy swivel base vise for precision milling. The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground. The jaws are hardened and ground. The fixed jaw is bolted from the top for enhanced rigidity. The jaws are 5" wide, 1.58" deep and open 5.71". Without the swivel base, the ways of the precision milling vise are parallel to the base of the vise within 0.0006" in 4". The jaws are perpendicular to the ways within 0.002" in 4". With the swivel base installed, the ways of the vise are parallel to the base of the vise within 0.0008" in 4".

3951 Vise, 5" Precision Milling, Professional Grade

Precision 5" Kurt-style milling machine vise with swivel base
Top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground
Interchangeable jaws are hardened and ground
The detachable swivel base features easy to read divisions
Fully enclosed heat treated screw

The replaceable jaws can be mounted on either end of the fixed and movable jaw supports providing a wide range of clamping distances.