We carry a full line of digital position readouts for lathes and mills.
|
- Hard wired 2-axis DRO package with mounting arm
- Designed for LittleMachineShop.com HiTorque bench lathes
- Complete package, no additional components needed
- Advanced display functions
- Rotating arm included
|
|
- 3-axis digital display works with magnetic DRO scales
- X, Y, and Z buttons reset the individual axis displays to 0.000
- Display can be changed from inches to mm
- Resolution: 0.001"
|
|
- Hard wired 3-axis DRO package with mounting arm
- Designed for LittleMachineShop.com HiTorque bench mills
- Complete package, no additional components needed
- Advanced display functions
- Mounting arm included
|
|
- Hard wired 3-axis DRO package with mounting arm
- Designed for LittleMachineShop.com HiTorque large bench mills
- Complete package, no additional components needed
- Advanced display functions
- Mounting arm included
|
|
- Fits milling machines with less than 32" total X-, Y-, and Z-axis travel
- Displays on any Android tablet with Bluetooth capability
- Resolution of 0.0002" (0.005 mm)
- 120-240 VAC Power supply
- Coolant and dust resistant (IP50)
|
|
These AG10 alkaline batteries fit our DRO display dial units.
11.6 mm diameter, 3.1 mm thick.
1.55 volts (nominal), 65 mAh.
These batteries interchange with LR1130 LR55 AG10 L1131 LR110 SR1130 389 189 V10GA
|
|
- DRO scale support bolt
- Holds Y-Axis DRO scale at appropriate height
- Fits HiTorque bench mills with DRO
- Fits SIEG SX2.7L bench mills with DRO
|
|
- DRO scale bracket, back
- Y-Axis
- HiTorque large bench lathe
- Fits SIEG SC4 bench lathes with DRO
|
|
- DRO scale bracket, front
- Y-Axis
- HiTorque large bench lathe
- Fits SIEG SC4 bench lathes with DRO
|
|
- DRO read head mounting bracket
- Secures read head to the column mounting block
- Fits HiTorque bench mills with DRO
- Fits SIEG SX2.7L mills with DRO
|
|
- Bracket, X-Axis read head
- Found on HiTorque deluxe bench lathes
- Fits SIEG SC4 bench lathes with DRO
|
|
- DRO read head mounting bracket
- For X & Y-Axis DRO scales
- Secures read head to the column mounting block
- Fits HiTorque large bench mills with DRO
- Fits SIEG SX3.5L mills with DRO
|
|
- DRO read head mounting bracket
- For Z-Axis DRO scales
- Secures read head to the column mounting block
- Fits HiTorque large bench mills with DRO
- Fits SIEG SX3.5L mills with DRO
|
|
- Traditional DRO display mounting arm for lathes
- Arm L/W/H is 220mm x 20mm x 40mm (8.7" x 0.79" x 1.6")
- Vertical post approx. 80mm (3.1")
- Baseplate is 74 mm x 50 mm (2.91" x 1.97")
- Comes with mounting hardware
|
|
- Traditional DRO display mounting arm for mills
- Overall length 360 mm (14.17")
- Arm L/W/H is 320mm x 20mm x 40mm (12.6" x 0.79" x 1.6")
- Baseplate is 74 mm x 50 mm (2.91" x 1.97")
- Comes with mounting hardware
|
|
- Connects individual display to sliding DRO scale
- 6.5ft Overall Length
- 2 Micro USB (5-pin) Male Ends
- Color Black
|
|
- This DRO kit is an upgrade for the LMS 4200 7x12 mini lathe
- Mounts right on the cross slide and compound rest to give you accurate depth-of-cut readings
- Resolution: 0.0001", accuracy: 0.001"
- Buttons for on/off, zero, and inch/mm
- Includes compound rest bottom and cross slide nut (not shown)
|
|
- Fits HiTorque Bench lathes
- Displays on any Android tablet with Bluetooth capability
- Resolution of 0.0002" (0.005 mm)
- 120 -240 VAC Power supply
- Coolant and dust resistant (IP50)
|
|
- Fits standard mini lathes, 7x10 to 7x16
- Displays on any Android tablet with Bluetooth capability
- Resolution of 0.0002" (0.005 mm)
- 100-240 VAC power supply
- Coolant and dust resistant (IP50)
|
|
- This DRO kit is specifically made for the 7x10, 7x12, and 7x14 mini lathe
- Mounts right on the cross slide and compound rest to give you accurate depth-of-cut readings
- Resolution: 0.0001", accuracy: 0.001"
- Buttons for on/off, zero, and inch/mm
- Fits SIEG C2/SC2 and HiTorque mini lathes
|
|
- Fits large-table solid column mini mills
- Displays on any Android tablet with Bluetooth technology
- Resolution of 0.0002" (0.005 mm)
- 120 -240 VAC Power supply
- Coolant and dust resistant (IP50)
|
|
- Fits most tilting column mini mills
- Displays on any Android tablet with Bluetooth capability
- Resolution of 0.0002" (0.005 mm)
- 120 -240 VAC Power supply
- Coolant and dust resistant (IP50)
|
|
- This DRO kit is specifically made for the C4/SC4 bench lathe tailstocks
- Mounts right to the back of the tailstock to give you accurate quill depth readings
- Resolution: 0.0001", accuracy: 0.001"
- Buttons for on/off, zero, and inch/mm
- Handwheel: 80 mm OD, 8 mm bore, 2 mm key
|
|
- Drill press digital readout (DRO)
- Easy to read LCD display
- Hardened stainless steel beam
- Range: 0 - 5"/125 mm, Accuracy: 0.001"
- Resolution: 0.0005"/0.01 mm/ 1/64"
|
|
- This DRO kit is specifically made for the 7x10, 7x12, 7x14 and 7x16 mini lathe tailstocks
- Mounts right to the back of the tailstock to give you accurate quill depth readings
- Resolution: 0.0001", accuracy: 0.001"
- Buttons for on/off, zero, and inch/mm
|
|
- This DRO kit for the 7x10, 7x12, and 7x14 mini lathe
- Compound slide components only
- Mounts right on the compound rest to give you accurate depth-of-cut readings
- Resolution: 0.0001", accuracy: 0.001"
- Buttons for on/off, zero, and inch/mm
|
|
- This DRO kit for the 7x10, 7x12, and 7x14 mini lathe
- Cross slide components only
- Mounts right on the cross slide to give you accurate depth-of-cut readings
- Resolution: 0.0001", accuracy: 0.001"
- Buttons for on/off, zero, and inch/mm
|
|
- 7" screen size
- Bluetooth capable
- 1024x600 resolution
- Up to 6 hours of battery life
|
|
- DRO Display for hard wired DRO kits
- Made for HiTorque bench mills and lathes
- Comes with protective cover and can be used with cover on or off
- Three 9-Pin connection ports allow use in both 3-axis and 2-axis application
|
|
- Magnetic read head for SIEG hard wired DRO
- Approx.78 3/4" (2 meters) overall length
- Includes scale wiper
- Sturdy 9-Pin connector pre-mounted
|
|
- 12" travel stainless steel scale
- Absolute origin zero memorized when unit is powered on
- Large LCD displays in inch/metric/fractions
- Articulating arm allows stacking of multiple displays
- IP54 Protective rating: Moisture and dust resistance
|
|
- 24" travel stainless steel scale
- Absolute origin zero memorized when unit is powered on
- Large LCD displays in inch/metric/fractions
- Articulating arm allows stacking of multiple displays
- IP54 Protective rating: Moisture and dust resistance
|
|
- 6" travel stainless steel scale
- Absolute origin zero memorized when unit is powered on
- Large LCD displays in inch/metric/fractions
- Articulating arm allows stacking of multiple displays
- IP54 Protective rating: Moisture and dust resistance
|
|
- Mounting block for the X-Axis DRO bracket
- Secures read head bracket to mill column
- Fits HiTorque bench mills with DRO
- Fits SIEG SX2.7L mills with DRO
- 13x24x10 mm
|
|
- Mounting block for the Y-Axis DRO bracket
- Secures read head bracket to mill column
- Fits HiTorque bench mills with DRO
- Fits SIEG SX2.7L mills with DRO
- 24x10x8 mm
|
|
- Mounting block for the Z-Axis DRO bracket
- Secures read head bracket to mill column
- Fits HiTorque bench mills with DRO
- Fits SIEG SX2.7L mills with DRO
- 17x24x10 mm
|
|
- Mains power for your DRO unit
- 120V input
- Plugs into display unit
|
|
- Magnetic read head for Bluetooth DRO
- 1 meter in length
- Includes scale wiper
|
|
- Buttons for on/off and mm/inch
- Replacement part for numerous DRO assemblies or machines
- Used in 2-axis DRO package for mini lathes
- Used in 2-axis DRO package for 20 TPI mini lathes
- Used in DRO package for mini lathe tailstock
|
|
- Conversion Kit for 4" Precision Rotary Table
- Save money by upgrading your existing table to DRO
|
|
- Includes 6 end cap mounts
- Cut to required lengths
- Aluminum frame and stainless cover protects magnetic scale
- 8.5 x 16 mm (0.33 x 0.63") Cross section
- Fit both Bluetooth and hardwired DRO kits
|
|
- DRO tablet stand
- For Bluetooth DRO display
- Can be moved for ideal viewing position
- Comes with HiTorque deluxe bench lathe with Bluetooth DRO
|
|
- Threaded stud
- Attaches DRO read head to cross slide
- Fits HiTorque deluxe large bench lathe
- Fits SIEG SC4 bench lathes with DRO
- Size M3x34.5
|
|
- Double Ended Stud, M4x28
- Nominal length 28 mm, Diameter 4 mm
- Long threaded section 14 mm
- Unthreaded section 14 mm
- Short threaded section 4 mm
|
|
- Works with Android tablets and phones
- 3-Axis capability
|
|
- Magnetic scale mounting bracket - Y-axis
- Used on X2 mini mills
- 220mm x 16mm x 8&5mm, holes 210mm on center
|