Outlet Store

In our outlet store we offer items that have been returned, have cosmetic blemishes ("scratch and dent"), have been refurbished, are missing a component, or for some other reason are not good enough to be sold as new--all at a greatly discounted price. Unless noted in the description, none of the items have been used, other than during testing and refurbishment. All items are sold "as-is"; there is no warranty. Aside from that, our normal return policy applies; if you don't like an item you purchase from us, return it within 30 days for credit.

All that said, machines that are described as refurbished carry the same limited warranty as the new machines we sell.

	Stand Cabinet, HiTorque Large Bench Mill This stand was damaged in shipping. Corner was dented and chipped. When the chip tray is in place, you won't even see the damage. Email us if you are interested and we will send picture of the damage. Original P/N 5989 $399.00
	Power Feed, HiTorque and SIEG X2D/X2L Mini Mills This refurbished power table feed is for the LMS HiTorque mini mills. Refurbished and tested. Original P/N 5112 $382.50
	Rear Splashguard Bench 8.5x20 Lathe We have a few extra SC4 rear splashguards that fit older model 8.5x20" bench lathes. Click your model to see the complete parts list. Original P/N 4363 $45.00
	Power Feed, HiTorque Large Bench Mill This refurbished power feed is for the 6700 and 6750 large bench mills. It is missing the limit switch and the bump stops so it won't stop automatically. Original P/N 4699 $399.00
	Compound Rest Assembly SIEG C0 Lathes This open box compound rest lost it's T-nut so we made a new one for it. Original P/N 2947 $45.00
	Vise, 3" Precision Milling, Professional Grade Professional vise with some of paint chips on the swivel base from shipping damage. Honestly, most folks remove the swivel anyway. Original P/N 4740 $225.00
	USB Powered Flex Neck LED Light with Magnetic Base USB Powered Flex Neck LED Light with Magnetic Base Power Supply: USB, 5V 1A/ 5V 2A input Power Draw: 3W Brightness 280 Lumens Cool White 5000K light color Dimmable Permanent Magnetic Base Original P/N 6313 $25.00
	Tap & Die Set, 40-Piece Solid Hex Dies We accidently got a few of the hex die version instead of the round dies that we normally carry. Original P/N 3601 $180.00
	V-Blocks, Set of Four, iGaging Missing clamps for large V-blocks Original P/N 6481 $44.00
	Chip Tray for 7x14 mini lathes Check Original item number to make sure it will fit your machine. Original P/N 1900 $18.95
	Power Feed, Mini Mill This refurbished power table feed is for the SIEG X2 class of mini mills (small table) including Harbor Freight 44991 and Grizzly G8689. Refurbished and tested. Original P/N 5111 $359.95
	Quick Change Tool Post Set, BXA Open Box Cosmetic Damage Original Price $315.95 Original P/N 3658 $275.00
	Tap & Die Set, 40-Piece Metric Irwin set 1835092. We accidently got a few of the 40 piece sets with 1" hex dies instead of the 41 piece version with 5/8" and 1" hex dies. Original P/N 3600 $180.00
	Milling Table, XY Table Assembly We discontinued these tables a little while ago in favor of the larger versions, but we found one last one kicking around here that we cleaned up, and recrated. Original P/N 1765 $200.00
	Android Tablet, Bluetooth DRO Readout OEM Factory version of the tablets for our millsand lathes with Bluetooth DROs. Woriking, but may have some scratches and dings. Original P/N 5513 $40.00
	Drill Set, 115(now 112) Piece Screw Machine Length HSS 115 Piece Screw Machine Length, perfect for smaller mills and lathes. HSS Black oxide coating USA Made Perfect except it is missing the #43, #44, and #46 bits. Original P/N 2827 $350.00
	Bellows, Chip Guard (short) We got a batch of these that are too short. They should be about 6"+ long but these are a little over 4". They make great repositionable ways covers for the mini and bench lathes. They also work great as tool catchers over mill vises for when your fingers turn to butter. Original P/N 1431 $1.50