Indexable Inserts

The information on this page cross references our cutting tools to indexable inserts that fit those tools, as well as the set screws for the tools. Additional information includes columns for high-speed steel or carbide inserts.

For and index organized by insert, jump to Reference by Insert.

This table shows the inserts that are available for the various tools that we sell. In some cases, you have a choice of high-speed steel or carbide inserts.

Additional resources for insert and tool nomenclature:
ANSI and ISO Insert Designations
ANSI Turning Tool Designations
ANSI Boring Bar Designations

We also have information about high-speed steel. See: What's So Good About High-Speed Steel?

LMS P/N Tool or Set High Speed Steel Inserts Carbide Inserts Screws
LMS P/N Industry Number Corner Radius LMS P/N Industry Number Corner Radius LMS P/N
Turning and Facing Tools
1913 Turning Tools, 1/4" Indexable, 5 Piece Set 1722
1723 		 TPMW-1.81.5.5
TPMW-1.81.51		 1/125"
1/64"		  
2033 		 
TCMT-1.81.51		  
1/64"		 2696
1719 Turning Tools, 1/4" Indexable, 5 Piece Set, A R Warner 1722
1723 		TPMW-1.81.5.5
TPMW-1.81.51		 1/125"
1/64"		  
2033 		 
TCMT-1.81.51		  
1/64"		 2690
1669 Turning Tools, 3/8" Indexable, 5 Piece Set  
1724
1725 		 
TCMW-21.51
TCMW-21.52		  
1/64"
1/32"		 3416
1670
3417 		TCMT-21.50
TCMT-21.51
TCMT-21.52		 1/125"
1/64"
1/32"		 2696
1619 Turning Tools, 3/8" Indexable, 5 Piece Set, A R Warner 1624
1621 		TPMW-221
TPMW-222		 1/64"
1/32"		  
5649 		 
TPMW-222		  
1/32"		 2693
4132 Turning Tools, 3/8" Indexable, 3 Piece Set, A R Warner  
1724
1725 		 
TCMW-21.51
TCMW-21.52		  
1/64"
1/32"		 3416
1670
3417 		TCMT-21.50
TCMT-21.51
TCMT-21.52		 1/125"
1/64"
1/32"		 2696
5609 Turning and Facing Tool, 3/8" Indexable, SCLCR-06-2J 4975
3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
1781 		 
CCMT-21.51		  
1/64"		 2695
5610 Turning and Facing Tool (LEFT), 3/8" Indexable, SCLCL-06-2J 4975
3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
1781 		 
CCMT-21.51		  
1/64"		 2695
5611 Facing Tool, 3/8" Indexable, SCKCR-06-2J 4975
3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
1781 		 
CCMT-21.51		  
1/64"		 2695
5612 Chamfer Tool, 3/8" Indexable, SCSCR-06-2J 4975
3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
1781 		 
CCMT-21.51		  
1/64"		 2695
5614 Turning and Facing Tool, 3/8" Indexable, SCBCR-06-2J 4975
3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
1781 		 
CCMT-21.51		  
1/64"		 2695
2286 Turning Tools, 1/2" Indexable, 5 Piece Set 3698
1623
1622 		TCMW-321
TPMB-321
TPMB-322		 1/64"
1/64"
1/32"		  
2381
5644 		 
TPGH-32.51
TPGH-322		  
1/64"
1/32"		 2694
1620 Turning Tools, 1/2" Indexable, 5 Piece Set, A R Warner 1623
1622 		TPMB-321
TPMB-322		 1/64"
1/32"		 5651
 		 TPMB-321
 		 1/64"
 		 2691
3569 Turning Tools, 1/2" Indexable, 2 Piece Set, A R Warner 3574
3575 		CCMW-32.51
CCMW-32.52		 1/64"
1/32"		 5643
1795 		CCMT-32.51
CCMT-32.52		 1/64"
1/32"		 3580
5615 Turning and Facing Tool, 1/2" Indexable, SCLCR-08-3A 3574
3575 		CCMW-32.51
CCMW-32.52		 1/64"
1/32"		 5643
1795 		CCMT-32.51
CCMT-32.52		 1/64"
1/32"		 2694
5616 Turning and Facing Tool (LEFT), 1/2" Indexable, SCLCL-08-3A 3574
3575 		CCMW-32.51
CCMW-32.52		 1/64"
1/32"		 5643
1795 		CCMT-32.51
CCMT-32.52		 1/64"
1/32"		 2694
5617 Facing Tool, 1/2" Indexable, SCKCR-08-3A 3574
3575 		CCMW-32.51
CCMW-32.52		 1/64"
1/32"		 5643
1795 		CCMT-32.51
CCMT-32.52		 1/64"
1/32"		 2694
5618 Chamfer Tool, 1/2" Indexable, SCSCR-08-3A 3574
3575 		CCMW-32.51
CCMW-32.52		 1/64"
1/32"		 5643
1795 		CCMT-32.51
CCMT-32.52		 1/64"
1/32"		 2694
5620 Turning Tool, 1/2" Indexable, SCBCR-08-3A 3574
3575 		CCMW-32.51
CCMW-32.52		 1/64"
1/32"		 5643
1795 		CCMT-32.51
CCMT-32.52		 1/64"
1/32"		 2694
Boring Tools
5435 Boring Bars, 5/16" Indexable, 80 Deg Diamond Inserts, 3 Piece 4975
3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
1781 		 
CCMT-21.51		  
1/64"		 2696
5436 Boring Bar, 5/16" Indexable, Reduced Neck (Discontinued) 4975
3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
1781 		 
CCMT-21.51		  
1/64"		 2696
3719 Boring Bar, 5/16" Indexable 4975
3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
1781 		 
CCMT-21.51		  
1/64"		 2696
1779 Boring Bar, 3/8" Indexable 4975
3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
1781 		 
CCMT-21.51		  
1/64"		 2695
1720 Boring Bar, 3/8" Indexable, HSS Triangle Inserts, A R Warner 1722
1723 		TPMW-1.81.5.5
TPMW-1.81.51		 1/125"
1/64"		       3699
4788 Boring Bar, 3/8" Indexable, 80 Deg HSS Diamond Inserts, A R Warner 4975 CEMW-21.5-.5 1/125"       3699
5605 Boring Bar, 3/8 Indexable, S06H-SCLCR-2 4975
3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
1781 		 
CCMT-21.51		  
1/64"		 2696
5606 Boring Bar, 3/8" Indexable, S06H-SCLCL-2, Left Hand (Discontinued) 4975
3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
1781 		 
CCMT-21.51		  
1/64"		 2696
1780 Boring Bar, 1/2" Indexable 3574
3575 		CCMW-32.51
CCMW-32.52		 1/64"
1/32"		 5643
1795 		CCMT-32.51
CCMT-32.52		 1/64"
1/32"		 5647
1721 Boring Bar, 1/2" Indexable, HSS Triangle Inserts, A R Warner 1624
1621 		TPMW-221
TPMW-222		 1/64"
1/32"		  
5649 		 
TPMT-222		  
1/32"		 2693
5607 Boring Bar, 1/2" Indexable, S08M-SCLCR-2, Right Hand (Discontinued) 4975
3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
1781 		 
CCMT-21.51		  
1/64"		 2696
5608 Boring Bar, 1/2" Indexable, S08M-SCLCL-2, Left Hand (Discontinued) 4975
3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
1781 		 
CCMT-21.51		  
1/64"		 2696
Profiling Tools
2431 Profiling Tool, 3/8" Indexable, 35 Deg Diamond Inserts, A R Warner 5110
3470 		VCMW-221
VCMW-222		 1/64"
1/32"		 5648
3471 		VCMT-221
VCMT-222		 1/64"
1/32"		 2693
4820 Profiling Tools, 3/8" Indexable R / L, 35 Deg Diamond Inserts, A R Warner 5110
3470 		VCMW-221
VCMW-222		 1/64"
1/32"		 5648
3471 		VCMT-221
VCMT-222		 1/64"
1/32"		 2693
5613 Profiling Tool, 3/8" Indexable, SCMCN-06-2J 4975
3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
1781 		 
CCMT-21.51		  
1/64"		 2696
5619 Profiling Tool, 1/2" Indexable, SCMCN-08-3A (Discontinued) 3574
3575 		CCMW-32.51
CCMW-32.52		 1/64"
1/32"		 5643
1795 		CCMT-32.51
CCMT-32.52		 1/64"
1/32"		 3580
Threading Tools
5437 Threading Tool, External, 3/8" Indexable, SER0375E11 (Discontinued)       5441 11ERA60   2688
5439 Threading Tool, Internal, 3/8" Indexable, SIR0375H11 (Discontinued)       5442 11IRA60   2688
3695 Threading Tool, External, 3/8" Indexable, HSS Triangle Inserts, A R Warner 3468
3469 		TNMC-32-NV
TPMC-32-NV		 0"
0"		       2691
3570 Threading Tool, Internal, 3/8" Indexable, HSS Triangle Inserts, A R Warner 1722
1723 		TPMW-1.81.5.5
TPMW-1.81.51		 1/125"
1/64"		       2690
5438 Threading Tool, External, 1/2" Indexable, SER0500H11 (Discontinued)       5441 11ERA60   2688
5440 Threading Tool, Internal, 1/2" Indexable, SIR0500K11 (Discontinued)       5442 11IRA60   2688
3467 Threading Tool, Int / Ext, 1/2" Indexable HSS Triangle Inserts, A R Warner 3468
3469 		TNMC-32-NV
TPMC-32-NV		 0"
0"		       2691
3571 Threading Tool, Internal, 1/2" Indexable HSS Triangle Inserts, A R Warner 1624
1621 		TPMW-221
TPMW-222		 1/64"
1/32"		  
5649 		 
TPMT-222		  
1/32"		 2693
Cut-Off Tools
5431 Cut-Off Tool Holder, 3/8" Shank, Holds GTN-2, GTL-2 ad GTR-2 Inserts       4994
5051		 GTN-2
GTR-2 (Discontinued) 		  N/A
5020 Cut-Off Blade, P2 Indexable       4994
5051		 GTN-2
GTR-2 (Discontinued) 		  N/A
3572 Grooving & Cut-Off Tool, 3/8" Indexable HSS Inserts, A R Warner 3576 1/64" Groover 0"       3579
3577 1/32" Groover 0"      
3578 1/16" Groover 0"      
4603 60° Threader 0"      
4819 Grooving & Cut-Off Tool, 1/2" Indexable HSS Inserts, A R Warner 3576 1/64" Groover 0"       3579
3577 1/32" Groover 0"      
3578 1/16" Groover 0"      
4603 60° Threader 0"      
5926 Grooving Tool Holder, 3/8" Shank, External MGEHR06-2       5930 MGMN-200-G   1530
5927 Grooving Tool Holder, 1/2" Shank, External MGEHR08-2       5930 MGMN-200-G   1530
Milling Tools
1889 Indexable End Mill, 2MT, 16 mm Cut Diameter       1910 TPG-221 (Discontinued)   2697
1146 Indexable End Mill, 3MT, 30 mm Cut Diameter       1216 TPC-322   1798
1952 Indexable End Mill, R8, 1.25" Cut Diameter       2277 TPG-322   1798
5427 Indexable End Mill, R8, 2" Cut Diameter       2277 TPG-322   1798
4806 Indexable End Mill, 2 Flute, 17 mm, Center Cut (Discontinued)       4814

4815		 QOGT0830R-G1 (Discontinued)
QOMT0830R-M2 (Discontinued) 		  5659
4804 Indexable End Mill, 2 Flute, 25 mm, Center Cut (Discontinued)       4808

4811		 QOMT1342R-M2 (Discontinued)
QOGT1342R-G1 (Discontinued) 		  5659
4121 Indexable Face Mill, 4 Flute, 38 mm Cut Diameter (Discontinued)       4122
4123 		APMT1135PDER-M
APGT1135PDFR-G2		   5659
5040 Indexable Toroidal Cutter, 2-Flute, 16 mm Cut Diameter (Discontinued)       5039 Toroidal Cutter HF7   5659
4663 SuperFly Cutter, Tormach TTS       4688
4689 		SEHT1204AFFN-X83
SEHT1204AFSN-X45		   4799
5428 Indexable End Mill, Square Shoulder, 3/8" Cut Diameter       5582 APKT-1003 1/64" 2693
5429 Indexable End Mill, Square Shoulder, 1/2" Cut Diameter       5582 APKT-1003 1/64" 2693
5430 Indexable End Mill, Square Shoulder, 5/8" Cut Diameter       5582 APKT-1003 1/64" 2693
5921 Dovetail Cutter, Indexable 60 Degree 1/2" Dia., 1 Flute       5931 TDEX-21.5 1/64" 2693
5922 Dovetail Cutter, Indexable 60 Degree 3/4" Dia., 2 Flute       5931 TDEX-21.5 1/64" 2693
Combination Sets
3693 Turning 1/4" & Boring 3/8" Indexable Tools, 3 Piece Set, A R Warner B:4975
T:3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
T:1781 		 
CCMT-21.51		  
1/64"		 B:3699
T:2693
5432 Turning & Boring Tools, 5/16" Indexable, 5 Piece Set (Discontinued)       2033 TCMT-1.81.51 1/64" 5646
3694 Turning & Boring Tools, 3/8" Indexable, 3 Piece Set, A R Warner B:4975
T:3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
T:1781 		 
CCMT-21.51		  
1/64"		 B:3699
T:2693
5433 Turning & Boring Tools, 3/8" Indexable, Triangle Inserts (Discontinued)  
1724
1725 		 
TCMW21.51
TCMW21.52		  
1/64"
1/32"		 3416
1670
3417 		TCMT21.50
TCMT21.51
TCMT21.52		 1/125"
1/64"
1/32"		 2696
6777 Turning Tools, 1/4" Indexable, 5 Piece Set  
1724
1725 		 
TCMW21.51
TCMW21.52		  
1/64"
1/32"		 3416
1670
3417 		TCMT-21.50
TCMT-21.51
TCMT-21.52		 1/125"
1/64"
1/32"		 2695
6778 Turning Tools, 5/16" Indexable, 5 Piece Set  
1724
1725 		 
TCMW21.51
TCMW21.52		  
1/64"
1/32"		 3416
1670
3417 		TCMT-21.50
TCMT-21.51
TCMT-21.52		 1/125"
1/64"
1/32"		 2695
6779 Turning Tools, 3/8" Indexable, 5 Piece Set  
1724
1725 		 
TCMW21.51
TCMW21.52		  
1/64"
1/32"		 3416
1670
3417 		TCMT-21.50
TCMT-21.51
TCMT-21.52		 1/125"
1/64"
1/32"		 2695
6781 Turning Tools, 1/2" Indexable, 5 Piece Set  
1724
1725 		 
TCMW21.51
TCMW21.52		  
1/64"
1/32"		 3416
1670
3417 		TCMT-21.50
TCMT-21.51
TCMT-21.52		 1/125"
1/64"
1/32"		 2695
6671 Turning Tools, 1/4" Indexable, 5 Piece Set, Harlingen 1722
1723 		TPMW-1.81.5.5
TPMW-1.81.51		 1/125"
1/64"
2033
TCMT-1.81.51
1/64"		 2696
6672 Turning Tools, 5/16" Indexable, 5 Piece Set, Harlingen 1722
1723 		TPMW-1.81.5.5
TPMW-1.81.51		 1/125"
1/64"
2033
TCMT-1.81.51
1/64"		 2696
6673 Turning Tools, 3/8" Indexable, 5 Piece Set, Harlingen  
1724
1725 		 
TCMW21.51
TCMW21.52		  
1/64"
1/32"		 3416
1670
3417 		TCMT21.50
TCMT21.51
TCMT21.52		 1/125"
1/64"
1/32"		 2696
6683 Turning Tools, 1/2" Indexable, 5 Piece Set, Harlingen  
1724
1725 		 
TCMW21.51
TCMW21.52		  
1/64"
1/32"		 3416
1670
3417 		TCMT-21.50
TCMT-21.51
TCMT-21.52		 1/125"
1/64"
1/32"		 2696
5434 Turning & Cut-Off Tools, 3/8" Indexable, 7 Piece Set 4975
3696



 CEMW-21.5-.5
CCMW-21.51



 1/125"
1/64"



 1781
5640
5441
5641
5642
5930 		CCMT-21.51 (x2)
DCMT-21.51 (x2)
11ERA60
WCMT 2.52
MRMN-200-M
MGMN-200-G		 1/64"
1/64"



 2696
5645
1530
6674 Turning Tools, 1/4" Indexable, 7 Piece Set, Harlingen 4975
3696



 CEMW-21.5-.5
CCMW-21.51



 1/125"
1/64"



 1781
5640
5441
5641
5642
5930 		CCMT-21.51 (x2)
DCMT-21.51 (x2)
11ERA60
WCMT 2.52
MRMN-200-M
MGMN-200-G		 1/64"
1/64"



 2696
5645
1530
6675 Turning Tools, 5/16" Indexable, 7 Piece Set, Harlingen 4975
3696



 CEMW-21.5-.5
CCMW-21.51



 1/125"
1/64"



 1781
5640
5441
5641
5642
5930 		CCMT-21.51 (x2)
DCMT-21.51 (x2)
11ERA60
WCMT 2.52
MRMN-200-M
MGMN-200-G		 1/64"
1/64"



 2696
5645
1530
6676 Turning Tools, 3/8" Indexable, 7 Piece Set, Harlingen 4975
3696



 CEMW-21.5-.5
CCMW-21.51



 1/125"
1/64"



 1781
5640
5441
5641
5642
5930 		CCMT-21.51 (x2)
DCMT-21.51 (x2)
11ERA60
WCMT 2.52
MRMN-200-M
MGMN-200-G		 1/64"
1/64"



 2696
5645
1530
6677 Turning Tools, 1/2" Indexable, 7 Piece Set, Harlingen 4975
3696



 CEMW-21.5-.5
CCMW-21.51



 1/125"
1/64"



 1781
5640
5441
5641
5930 		CCMT-21.51 (x2)
DCMT-21.51 (x2)
11ERA60
WCMT 2.52
MRMN-200-M
MGMN-200-G		 1/64"
1/64"



 2696
5645
1530
5929 Indexable End Mill Set, 1/2" Shank Square Shoulder 5582 APKT-1003 1/64" 2696

T=Turning   B=Boring   C=Cut-Off


Reference by Insert

This table shows Our cutting tool offerings organized by insert type.

High Speed Steel Inserts Carbide Inserts LMS P/N Tool or Set
LMS P/N Industry Number Corner Radius LMS P/N Industry Number Corner Radius
Triangle Inserts
1722
1723 		 TPMW-1.81.5.5
TPMW-1.81.51		 1/125"
1/64"		  
2033 		 
TCMT-1.81.51		  
1/64"		 1913
1719
3570
1720
6671
6672
5432
 Turning Tools, 1/4" Indexable, 5 Piece Set
Turning Tools, 1/4" Indexable, 5 Piece Set, A R Warner
Threading Tool, Internal, 3/8" Indexable, HSS Triangle Inserts, A R Warner
Boring Bar, 3/8" Indexable, HSS Triangle Inserts, A R Warner
Turning Tools, 1/4" Indexable, 5 Piece Set, Harlingen
Turning Tools, 5/16" Indexable, 5 Piece Set, Harlingen
Turning & Boring Tools, 5/16" Indexable, 5 Piece Set (Discontinued)
1724
1725 		TCMT21.50
TCMT21.51
TCMT21.52		 1/125"
1/64"
1/32"		 3416
1670
3417 		TCMT-21.50
TCMT-21.51
TCMT-21.52		 1/125"
1/64"
1/32"		 4132
1669
6777
6778
6779
6781
6673
6683
5433		 Turning Tools, 3/8" Indexable, 3 Piece Set, A R Warner
Turning Tools, 3/8" Indexable, 5 Piece Set
Turning Tools, 1/4" Indexable, 5 Piece Set
Turning Tools, 5/16" Indexable, 5 Piece Set
Turning Tools, 3/8" Indexable, 5 Piece Set
Turning Tools, 1/2" Indexable, 5 Piece Set
Turning Tools, 3/8" Indexable, 5 Piece Set, Harlingen
Turning Tools, 1/2" Indexable, 5 Piece Set, Harlingen
Turning & Boring Tools, 3/8" Indexable, Triangle Inserts (Discontinued)
3698
1623
1622 		TCMW-321
TPMB-321
TPMB-322		 1/64"
1/64"
1/32"		  
2381
5644 		 
TPGH-32.51
TPGH-322		  
1/64"
1/32"		 2286 Turning Tools, 1/2" Indexable, 5 Piece Set
1623
1622 		TPMB-321
TPMB-322
1/64"
1/32"		 5651 TPMB-321 1/64" 1620 Turning Tools, 1/2" Indexable, 5 Piece Set, A R Warner
      5931 TDEX-21.5 1/64" 5921
5922 		Dovetail Cutter, Indexable 60 Degree 1/2" Dia., 1 Flute
Dovetail Cutter, Indexable 60 Degree 3/4" Dia., 2 Flute
3468
3469 		TNMC-32-NV
TPMC-32-NV		 0"
0"		       3695
3467 		Threading Tool, External, 3/8" Indexable, HSS Triangle Inserts, A R Warner
Threading Tool, Int / Ext, 1/2" Indexable HSS Triangle Inserts, A R Warner
      1216 TPC-322   1146 Indexable End Mill, 3MT, 30 mm Cut Diameter
      2277 TPG-322   1952
5427 		Indexable End Mill, R8, 1.25" Cut Diameter
Indexable End Mill, R8, 2" Cut Diameter
1624
1621 		TPMW-221
TPMW-222		 1/64"
1/32"		  
5649 		 
TPMW-222		  
1/32"		 1721
3571
1619 		Boring Bar, 1/2" Indexable, HSS Triangle Inserts, A R Warner
Threading Tool, Internal, 1/2" Indexable HSS Triangle Inserts, A R Warner
Turning Tools, 3/8" Indexable, 5 Piece Set, A R Warner
Diamond Inserts
4975
3696 		CEMW-21.5-.5
CCMW-21.51		 1/125"
1/64"		  
1781 		 
CCMT-21.51		  
1/64"		 1779
4788
3719
3694
3693
5434
6674
6675
6676
6677
5609
5610
5611
5612
5613
5614
5605
5435
5436
5606
5607
5608
 Boring Bar, 3/8" Indexable
Boring Bar, 3/8" Indexable, 80 Deg HSS Diamond Inserts, A R Warner
Boring Bar, 5/16" Indexable
Turning & Boring Tools, 3/8" Indexable, 3 Piece Set, A R Warner
Turning 1/4" & Boring 3/8" Indexable Tools, 3 Piece Set, A R Warner
Turning & Cut-Off Tools, 3/8" Indexable, 7 Piece Set
Turning Tools, 1/4" Indexable, 7 Piece Set, Harlingen
Turning Tools, 5/16" Indexable, 7 Piece Set, Harlingen
Turning Tools, 3/8" Indexable, 7 Piece Set, Harlingen
Turning Tools, 1/2" Indexable, 7 Piece Set, Harlingen
Turning and Facing Tool, 3/8" Indexable, SCLCR-06-2J
Turning and Facing Tool (LEFT), 3/8" Indexable, SCLCL-06-2J
Facing Tool, 3/8" Indexable, SCKCR-06-2J
Chamfer Tool, 3/8" Indexable, SCSCR-06-2J
Profiling Tool, 3/8" Indexable, SCMCN-06-2J
Turning and Facing Tool, 3/8" Indexable, SCBCR-06-2J
Boring Bar, 3/8 Indexable, S06H-SCLCR-2
Boring Bars, 5/16" Indexable, 80 Deg Diamond Inserts, 3 Piece
Boring Bar, 5/16" Indexable, Reduced Neck (Discontinued)
Boring Bar, 3/8" Indexable, S06H-SCLCL-2, Left Hand (Discontinued)
Boring Bar, 1/2" Indexable, S08M-SCLCR-2, Right Hand (Discontinued)
Boring Bar, 1/2" Indexable, S08M-SCLCL-2, Left Hand (Discontinued)
3574
3575 		CCMW-32.51
CCMW-32.52		 1/64"
1/32"		 5643
1795 		CCMT-32.51
CCMT-32.52		 1/64"
1/32"		 1780
3569
5615
5616
5617
5618
5619
5620
 Boring Bar, 1/2" Indexable
Turning Tools, 1/2" Indexable, 2 Piece Set, A R Warner
Turning and Facing Tool, 1/2" Indexable, SCLCR-08-3A
Turning and Facing Tool (LEFT), 1/2" Indexable, SCLCL-08-3A
Facing Tool, 1/2" Indexable, SCKCR-08-3A
Chamfer Tool, 1/2" Indexable, SCSCR-08-3A
Profiling Tool, 1/2" Indexable, SCMCN-08-3A (Discontinued)
Turning Tool, 1/2" Indexable, SCBCR-08-3A
       5640 DCMT-21.51   5434
6674
6675
6676
6677
 Turning & Cut-Off Tools, 3/8" Indexable, 7 Piece Set
Turning Tools, 1/4" Indexable, 7 Piece Set, Harlingen
Turning Tools, 5/16" Indexable, 7 Piece Set, Harlingen
Turning Tools, 3/8" Indexable, 7 Piece Set, Harlingen
Turning Tools, 1/2" Indexable, 7 Piece Set, Harlingen
5110
3470 		VCMW-221
VCMW-222		 1/64"
1/32"		 5648
3471 		VCMT-221
VCMT-222		 1/64"
1/32"		 2431
4820
 Profiling Tool, 3/8" Indexable, 35 Deg Diamond Inserts, A R Warner
Profiling Tools, 3/8" Indexable R / L, 35 Deg Diamond Inserts, A R Warner
Parallelogram Inserts
3576
3577
3578
4603
 1/64" Groover
1/32" Groover
1/16" Groover
60° Threader		 0"
0"
0"
0"		       3572
4819
 Grooving & Cut-Off Tool, 3/8" Indexable HSS Inserts, A R Warner
Grooving & Cut-Off Tool, 1/2" Indexable HSS Inserts, A R Warner
      5582 APKT-1003 1/64" 5929
5428
5429
5430
 Indexable End Mill Set, 1/2" Shank Square Shoulder
Indexable End Mill, Square Shoulder, 3/8" Cut Diameter
Indexable End Mill, Square Shoulder, 1/2" Cut Diameter
Indexable End Mill, Square Shoulder, 5/8" Cut Diameter
      4122
4123 		APMT1135PDER-M
APGT1135PDFR-G2		   4121 Indexable Face Mill, 4 Flute, 38 mm Cut Diameter (Discontinued)
      4808
4811		 QOMT1342R-M2 (Discontinued)
QOGT1342R-G1 (Discontinued) 		  4804 Indexable End Mill, 2 Flute, 25 mm, Center Cut (Discontinued)
      4814
4815		 QOGT0830R-G1 (Discontinued)
QOMT0830R-M2 (Discontinued) 		  4806 Indexable End Mill, 2 Flute, 17 mm, Center Cut (Discontinued)
Other Inserts
      5441 11ERA60   5434
6674
6675
6676
6677
5437
5438
 Turning & Cut-Off Tools, 3/8" Indexable, 7 Piece Set
Turning Tools, 1/4" Indexable, 7 Piece Set, Harlingen
Turning Tools, 5/16" Indexable, 7 Piece Set, Harlingen
Turning Tools, 3/8" Indexable, 7 Piece Set, Harlingen
Turning Tools, 1/2" Indexable, 7 Piece Set, Harlingen
Threading Tool, External, 3/8" Indexable, SER0375E11 (Discontinued)
Threading Tool, External, 1/2" Indexable, SER0500H11 (Discontinued)
      5442 11IRA60   5439
5440		 Threading Tool, Internal, 3/8" Indexable, SIR0375H11 (Discontinued)
Threading Tool, Internal, 1/2" Indexable, SIR0500K11 (Discontinued)
      5641 WCMT 2.52   5434
6674
6675
6676
6677
5437
5438
 Turning & Cut-Off Tools, 3/8" Indexable, 7 Piece Set
Turning Tools, 1/4" Indexable, 7 Piece Set, Harlingen
Turning Tools, 5/16" Indexable, 7 Piece Set, Harlingen
Turning Tools, 3/8" Indexable, 7 Piece Set, Harlingen
Turning Tools, 1/2" Indexable, 7 Piece Set, Harlingen
Threading Tool, External, 3/8" Indexable, SER0375E11 (Discontinued)
Threading Tool, External, 1/2" Indexable, SER0500H11 (Discontinued)
      4994
5051		 GTN-2
GTR-2 (Discontinued) 		  5020
5431 		Cut-Off Blade, P2 Indexable
Cut-Off Tool Holder, 3/8" Shank, Holds GTN-2, GTL-2 ad GTR-2 Inserts
      5930 MGMN-200-G   5927
5926
5434
6674
6675
6676
6677
 Grooving Tool Holder, 1/2" Shank, External MGEHR08-2
Grooving Tool Holder, 3/8" Shank, External MGEHR06-2
Turning & Cut-Off Tools, 3/8" Indexable, 7 Piece Set
Turning Tools, 1/4" Indexable, 7 Piece Set, Harlingen
Turning Tools, 5/16" Indexable, 7 Piece Set, Harlingen
Turning Tools, 3/8" Indexable, 7 Piece Set, Harlingen
Turning Tools, 1/2" Indexable, 7 Piece Set, Harlingen
      5642 MRMN-200-M   5434 Turning & Cut-Off Tools, 3/8" Indexable, 7 Piece Set
      4688
4689 		SEHT1204AFFN-X83
SEHT1204AFSN-X45		   4663 SuperFly Cutter, Tormach TTS
      5039 Toroidal Cutter HF7   5040 Indexable Toroidal Cutter, 2-Flute, 16 mm Cut Diameter (Discontinued)